Nairaland Forum

shiloh: Thanks guys... I hope am able to do it..cos dis grammar pass my power. Maybe will look for someone to help me.

ogoplus: [i][/i][b][/b]

Overview
The following article explains how create an IT policy on the BlackBerry Enterprise Server in order to block incoming calls from a specific phone number from reaching a BlackBerry smartphone. You can apply this IT policy to a single smartphone or multiple smartphones.



Resolution
To block incoming calls to a BlackBerry smartphone:

1.Create a new IT policy.
2.Edit the Firewall policy group.
3.Select Restrict Incoming Cellular Calls.
4.Enter the number you want to block.
For example:

+1##########r;

Note: An r and a semicolon must occur at the end of the phone number, or the IT policy will allow the phone number listed and block the rest of the phone numbers from calling.


Additional Information
If you are unable to block incoming calls from a phone number using an IT policy, we recommend that you contact the wireless service provider and request that they block incoming calls from the phone number.




SOURCE:http://btsc.webapps.blackberry.com[b]

sameolg616:
forgive my late response..i couldnt deduce so much fromyour screenshot...to be frank,system restore would not help as a colleague earlier advised...your MBR(master boot record) or partition table appears to be damage..its simply not anyone here would be able to analyze properly unless they see it.
here is a simple self test:
goto CONTROL PANEL
-click on SYSTEM
-click on HARDWARE
-click on DEVICE MANAGER
--find DISK DRIVES in the tree and collapse it(ie click on the +)
-you will find the name of the drive there
-right-click on it and chose PROPERTIES
-click on VOLUMES
click on POPULATE and wait..
let me know the message the system returns...call me on 08061679732 for quick response..post screenshots
-

onegig:

Right click on it in computer management and give it a drive letter. I.e x , j, or anything you feel like. It will come back instantly.

sameolg616:
dude there is a syntax and structure for doing these things...something u may never learn in just a post or reply(truthfully) else it would be a 'shot in d dark'.different problems require certain procedures and in some really hard cases-NONE!
i apologise if my post may have misled or disappointed u in achieving ur aim.i really dont know wht u are trying to achieve or solve.never have i used diskmagt to "open or explore a disk"(its use was totally misplaced"
in your post,u dint even state what the problem was and i find it quite absurd sending screenshots of an error message encountered with DISKMGT..
as i've been taught,the 1st step to solving a problem is "IDENTIFYING THE PROB"..so kindly retrace ur steps..

sameolg616:
now let me tell u the difference between a file recovery and a partition recovery...u simply cant use a file recovery to recover a partition.file recovery recovers only files in existing partitions while a partition recovery recovers lost partition on a harddrive that contains the files...ie hard drive-->partition--->file--->data...so u can see that ur file recovery software wont get parst partition..good thing about a partition recovery is,,if successfully recovered,all ur files are intact.the kinda software I use would mount the partition on windows as a virtual drive so u can have access to all ur files while maintaining the structure...call me on 08061679732

deji2009:

Please gather your thought to answer the followings one at a time.

Is the laptop 32 or 64 bit (check computer specs)?

Is the windows 7 instal cd a 32 bit or 64 bit ? check this

Is the windows 7 original setup cd or a copy version ?

Have you retry the instalation

What the name of the differet hdd you're using . e.g. western digital or hitachi

The unknown error code should have a long numbers

Pop in the win 7 install cd and let it load
should give you option for command prompt

click it and make sure the hdd in question is in
and run sfc /scannow if no joy run chkdsk on it

deji2009:

@Philcool

For HP laptop to install windows xp it got to be
changed to native mode meaning ide hard drive type

for sata hard drive type i.e. windows vista or windows 7
install it need to ahci for it to detect the hard disk

you can also run hard drive d test in the bios

Philcool: Samuel, But sorry to add this, do you know that it works well with the former 500GB HDD when being put back since the other available ones could not allow for full Win7 OS installation to be complete without saying error thzt relates to hardware issue. What could make that particular HDD work and then making other ones look like they are not okay when they are okay and are working in other laptops.
Is there a feature in this HP-630 laptop that I am missing which ought to adjusted to allow it pick other laptop HDD of same SATA connection? Please have your time and look into my matter, please. Thanks a lot. Waiting patiently, please.

sameolg616:
Goto ur bios and check if ur SATA NATIVE MODE is enabled..disable it or u will see ahci ,turn it into ide..(Judgin by ur admission dat 3hdds have not worked )

braintrack:

Pls which software can i use to edit or remove date from video, i have a video and i want to remove date from the video.

Emeka 7.:

Just to send free text msgs¿

abrahym:

Try opera 11.5 it cool