isangjohnson:
Who has EpSolar Epever eTracer Mppt CC 60A 150V should drop prcice and contact.

tsiriman:


My inverter is a smaller one.

I had some concern on the temperature of my 5kW Deye inverter.
The inverter is situated in a well ventilated area but the heat sink gets quite hot, that's how the design is, so I decided to take some precautions for increased span.

The 5kW has just one fan on the bottom of the left heat sink. So I'm order to keep the temperature at manageable range and possibly extend life span of the inverter components, I bought 2 120mm PWM fluid bearing PC fans, 2 brackets to couple the 2 fans together and a dual fan controller to control the speed of the 2 fans based on temperature.
I installed the fan assembly under the right heatsink beside the factory fan.
The original factory fans still runs from time to time but I noticed that it runs much less than it used to and the temperature seen for the Solarman app shows that the temperature is some degrees lower, also the temperature of the heat sink when felt with hand is lower than it used to be.
The new aftermarket fans run continuously 24/7 but speed increases and reduces based on temperature.

Want to find out if anyone has any aftermarket setup on their hydrid inverter to regulate inverter temperature.

Valto:
6pcs of 300w is 1800w
4pcs of 450w yingli or jinko =1800w
trying to cut corners with cheap panels will not pay u in the long run. auxano solar is authentic though, but u are still better off with 4pcs 450w yingli or jinko

OmoEpe:
Am about going out to buy components for a 1.5kva solar inverter. Kindly help a brother make right decisions by answering the following questions


1) what products of 1.5kva inverter will you recommend for me



2)What products of Batteries 220ha 2nos


3)Brand new Solar panels or Tokunbo solar.panels (300watts) 4nos



4) 30amp or 60amp charge control?



5)60Amp or 30Amp charge control for my size of installation?

6) MPTT or PMW charge control?




Every help gotten within the next 4hrs will be appreciated
g
God bless you

TechGeek777:
Please can someone recommend a 2.5kva - 3.5kva 24v hybrid inverter with MPPT CC. It should have adjustable charging current & charging voltage settings that's compatible with LFP and has maximum power/idle consumption of <=20W and should be <=250k Max.

nlfpmod:


https://twitter.com/samlogic_/status/1605208397347180544

Dear All,

Please take note that henceforth, individuals requiring foreign exchange transactions with the bank will be required to present a tax clearance certificate for the three years immediately preceding the current year of assessment.

The transactions covered by this requirement include but not limited to:

• Form A transactions
• Outgoing payments from domiciliary accounts
• Applications for foreign exchange conversions

samir101ng:


I hope this is not too late but you can check out the SRNE Solar Hybrid Inverter:
a. 3.3Kva 24v 500v DC Hybrid for N237,000
b. 3Kva 24v 100v DC Hybrid for N191,000

You can contact Mr Ugo below:
HM Solar Co Ltd
10b Prince Jude Nwabueze Street, Greenfield Estate,
Ago Palace Way, Isolo, Lagos, Nigeria
Olive Estate, Alhaji Ganiyu Olaiya Street, off navy gate
Satellite Town, Lagos
+2348034490636
+2347040329474
+2349050884061
hmsolarcoltd@gmail.com

Valto:
6pcs of 300w is 1800w
4pcs of 450w yingli or jinko =1800w
trying to cut corners with cheap panels will not pay u in the long run. auxano solar is authentic though, but u are still better off with 4pcs 450w yingli or jinko

TechGeek777:


Thanks bro, it's not too late but the No-Load Loss is quite high.

Non Energy-saving Mode: ≤50W (1200W in every 24 hours)
Energy-saving Mode：≤25W (600W in every 24 hours).

I intend not to use much from the battery during the day.

I need 24v hybrid 3kva - 3.5kva batteryless mode inverter that can power 2hp pumping machine, have editable charging current and voltage that will be compatible with LFP, with idle consumption of <=20W and should not be more than 250k.

Please experts kindly look into this spec.

TechGeek777:


Please 450W Mono Half Cut Yingli is how much?

samir101ng:


Bro, something has to give in those your parameters

All-in-one hybrid inverter systems are doing a lot of things and therefore there is a minimum power draw that they must use especially at your price point of N250k. However, checkout the Growatt SPF-3000TL-LVM-24P. It has an idle consumption of 2W from the spec sheet.

Valto:
125k

TechGeek777:


Thanks bro, it's not too late but the No-Load Loss is quite high.

Non Energy-saving Mode: ≤50W (1200W in every 24 hours)
Energy-saving Mode：≤25W (600W in every 24 hours).

I intend not to use much from the battery during the day.

I need 24v hybrid 3kva - 3.5kva batteryless mode inverter that can power 2hp pumping machine, have editable charging current and voltage that will be compatible with LFP, with idle consumption of <=20W and should not be more than 250k.

Please experts kindly look into this spec.

durodee:
Comment on "batteryless" inverters from direct use. They cannot function at full capacity without batteries irrespective of the panels yield. Also while in that mode, any surge demand ( fridge etc) may trip off the inverter. Also be ready for intermittent trips from cloud cover etc as it can only address present demand from solar yield. I ended up reserving that mode for emergencies only.

Abbeyb1ack:
Please how do we calculate consumption of 3 different flat connected to 1 prepaid meter....

Is there any gadget that can be installed to get the consumption of each flat?

Abbeyb1ack:
Please how do we calculate consumption of 3 different flat connected to 1 prepaid meter....

Is there any gadget that can be installed to get the consumption of each flat?

henro4niger:
Good day house, I have read through numerous pages and I'm impressed with the conversation going on in this thread and the amount of smart people we have in here. Please I am in abuja and I want to setup solar in my house. I plan to get 2.4kva solar system as that will take care of all my needs.

Please I need help with the setup. Kindly recommend equipment combinations, size and if possible brands, please I am on a tight budget

1. Charge controller
2. Solar panels
3. Inverter make (for someone on a budget but works well)
4. Battery make and size.

Kindly share any trusted abuja plug

vta2008:


Quick question abeg since we seem to have the same inverter.

Is the fan on yours always on irregardless of how much load is on it or how hot is?

I noticed that when charging hits 50A and the temperature goes above 45c, the two fans run very loud. Once temps drop below 45c, one fan shuts down and the other continues non stop with less intense noise.

I contacted the brand's customer care and they said this is normal

samir101ng:


I hope this is not too late but you can check out the SRNE Solar Hybrid Inverter:
a. 3.3Kva 24v 500v DC Hybrid for N237,000
b. 3Kva 24v 100v DC Hybrid for N191,000

You can contact Mr Ugo below:
HM Solar Co Ltd
10b Prince Jude Nwabueze Street, Greenfield Estate,
Ago Palace Way, Isolo, Lagos, Nigeria
Olive Estate, Alhaji Ganiyu Olaiya Street, off navy gate
Satellite Town, Lagos
+2348034490636
+2347040329474
+2349050884061
hmsolarcoltd@gmail.com

Abbeyb1ack:
Please how do we calculate consumption of 3 different flat connected to 1 prepaid meter....

Is there any gadget that can be installed to get the consumption of each flat?

earthrealm:


There are so many options to choose from.
There is even a wifi option, so you can view ur usage over the inernet and it has historical data storage days, weeks, months years...instantenous load etc...timer load control...though most of the extra functions are only available on website
Infact this is the end of discussion

https://a.aliexpress.com/_EyMlX0R

US $27.35 10%OFF | AT4PW 100A Tuya WIFI Din Rail Smart Switch Remote Control AC 220V 110V Digital Power Energy Volt Amp Kwh Frequency Factor Meter
https://a.aliexpress.com/_EyMlX0R

Valto:
24V MUSTPOWER 3KVA hybrid inverter, 80A mppt adjustable charge settings pretty low idle consumption. sold around 220k to 230k

mctfopt:



You'll be surprised at the stunt some tech people pull off at jobs. I've seen someone bill for 4mm² 3 core flex, one for input and one for output. The tech guy ended up using one of the wires (3 core) for both input and output. How he achieved this is both criminal and at the same time genius. The 3 core wire was used this way, L was used for input live, the neutral wire was used for both input and output neutral (inverters share a common neutral for both input and output) and the third wire, earth, was used for output live. Dude did not really care for earth, "after all it works"



So he bought only 30m of cable and pocketed the money for the other 30m meant for output wire.

Jefferyzz:
2.5kva or 2kw u mean
How tight is your budget. State d amount.