bigrovar:


There is no way an home theater or sound surrounds can consume 850w and 1000w respectively. You are confusing sound watts with electricity watts. Get a watt meter for proper testing

exactly my thoughts. you have too many power guzzling appliances.
kindly re-check the nameplate power specs or best still use a watt meter.
pay particular attention to the home theater, surround system and cpu.
if they really consume that much power, it may be better to just replace
them and get more recent and energy efficient models.

your present load outlook is 3575w going by your list above. unless you
do a proper load audit and confirm the actual power requirements of the
items already identified above, you may need up to 5kva inverter to carry
your house. however, i'm sure this figure will come down after you
re-adjust the high load items downwards.

bigrovar:


There is no way an home theater or sound surrounds can consume 850w and 1000w respectively. You are confusing sound watts with electricity watts. Get a watt meter for proper testing

Surround system : 330 watts
Home theatre: 500 watts

Good night kiekie1, l have luminous 2.5kva 36v with three 150ah battery, how many 200w mono solar panels are needed for appropriate charging ?
Thanks.

purplekayc:


Surround system : 330 watts
Home theatre: 500 watts

A normal 1000watts home theatre can not consume more than 70watts at a moderate volume

garbamaza:
Good night kiekie1, l have luminous 2.5kva 36v with three 150ah battery, how many 200w mono solar panels are needed for appropriate charging ?
Thanks.

Your total or average consumption will help in the sizing of your solar array, try and determine your power consumption in a day.

Ferdiwar:


A normal 1000watts home theatre can not consume more than 70watts at a moderate volume

I will review it again

purplekayc:
I will review it again

just drop the model of your device I will give you the watt. But a home theatre with a 3ohms speaker should not consume more than 120w max. Please take note. A plasma tv will consume more than 180w

purplekayc:
I will review it again

You need a watt meter first... Now I have understanding about what all my appliances consume..

I just realised my Inverter Idle mode is 18Watts..

The DC meter below I found most accurate for Battery voltage as in State of charge..

Dam5reey:


You need a watt meter first... Now I have understanding about what all my appliances consume..

I just realised my Inverter Idle mode is 18Watts..

The DC meter below I found most accurate for Battery voltage as in State of charge..

I don't have this device

purplekayc:


Surround system : 330 watts
Home theatre: 500 watts

Bros. Those figures are still too much for a sound system. My 1200w LG 5.1 sound system uses just 18w at seriously disturbing your neighbors volume. If you want to do this properly. Get a watt meter. That small device would help you save considerable sum. It's not expensive heck it will cost a tiny fraction of what you will end up spending..

bigrovar:

Bros. Those figures are still too much for a sound system. My 1200w LG 5.1 sound system uses just 18w at seriously disturbing your neighbors volume. If you want to do this properly. Get a watt meter. That small device would help you save considerable sum. It's not expensive heck it will cost a tiny fraction of what you will end up spending..

I will go over everything

JUO:
just drop the model of your device I will give you the watt. But a home theatre with a 3ohms speaker should not consume more than 120w max. Please take note. A plasma tv will consume more than 180w

This are the two sound systems and plasma TV

1.LG DVD receiver HT 534
2.LG DH6230S home theatre system
3. LG plasma TV 32LF551U

Hi, I need an advice urgently. I want to install 5kva inverter in a duplex,to power 3 led tvs, 1 Ac 1.5 kva all light and 4 fans. Pls, how many batteries do I need? And what products I better?

smilingbolar:
Hi, I need an advice urgently. I want to install 5kva inverter in a duplex,to power 3 led tvs, 1 Ac 1.5 kva all light and 4 fans. Pls, how many batteries do I need? And what products I better?

Bros we are not magicians here.neither do we have super cow powers. If you need up with sizing of inverter and battery bank you need to supply proper data that would allow us to help. Get a watt meter it's less than 10k and do proper energy audit and then come here with the result and see if we don't help.

Harvest from my 1kw system......I'm balling

DMerciful:
Harvest from my 1kw system......I'm balling

Excellent CC. EPSolar I presume? With 42+ temp my CC still harvested 1.3kw from 1.52kw Mono Solarworld panels yesterday. Sorry for repeating the obvious : CC matters!!

DMerciful:
Harvest from my 1kw system......I'm balling

boss, is dat hw much its pumping to the batteries, or how much its getting from the panels?

That's what's going into my battery from a 1kw system...quite impressive and its sunshine panels

foonshur:

boss, is dat hw much its pumping to the batteries, or how much its getting from the panels?

Its d admirable Epsolar itracer 60A and the panel is sunshine . I saw 40A as harvest but briefly b4 I could snap it

durodee:
Excellent CC. EPSolar I presume? With 42+ temp my CC still harvested 1.3kw from 1.52kw Mono Solarworld panels yesterday. Sorry for repeating the obvious : CC matters!!

purplekayc:


This are the two sound systems and plasma TV

1.LG DVD receiver HT 534=100w
2.LG DH6230S home theatre system?
3. LG plasma TV 32LF551U. Led not plasma consumption 30w

please check the back of your device for proper wattage

JUO:
Fangpusun
80a-12/24/36/48/60v=175k
70a-12/24/36/48v=105k
60a-12/24/36/48/60v=155k
60Da-12/24/36/48v=125k
50Da-12/24v=70k
50a-12/24v=55k
45a-12/24/36/48v=80k
30a-12/24v=35k
Mppt control=20k

Epsolar
40a A series -12/24v=65k
30a A series -12/24v=47k
30a CN series -12/24v=35k
Mt50=17k

Battery monitor
Dc-100a-6-100v=10k
AC-100a-220v=7k

DC breaker
125v-16-63a=3k

Digital timer din rail
220v/16a=7k

Solar dc fan available (limited quantity)
DC input 12v
Power consumption 6-36w
Direct solar compatible (12v solar panel)
Direct battery compatible (12v battery)
AC 220v compatible (12v adapter)
Size 56"
5 speed
Price 25k
O8o98733709

good day house...
anybody have any idea how reliable Safepower batteries are.. ?
thanks
cheers

JUO:
please check the back of your device for proper wattage

thanks would go wil chech DAT one wen I get home

DMerciful:
That's what's going into my battery from a 1kw system...quite impressive and its sunshine panels

I saw what you did there

Epsolar Itracer is a beast.

I missed your post. I am really excited that someone located in the GH is also interested in Solar and is on this platform. I will be very happy to link up. refa.dodowa at google mail.

nene2016:
Boss. I am in GH and been following this tread too. Thanks to the big bosses like George. I am planning to use solar and I would be grateful if you could give me some pointers as to where to get quality solar in items in GH for installation. Please give me your email so we can talk more. Thanks.

My average wattage is 1275w

bigrovar:
I saw what you did there

Epsolar Itracer is a beast.

though i hate 2 things about my 60a epsolar cc, especially the first point, its standard on MS n fangpusen CC

1. the log is not robust enough, it doesnt log daily kwh/ah harvest daily
2. its soc algorithm is wack, always wrong

earthrealm:


though i hate 2 things about my 60a epsolar cc, especially the first point, its standard on MS n fangpusen CC

1. the log is not robust enough, it doesnt log daily kwh/ah harvest daily
2. its soc algorithm is wack, always wrong

Lolz... the SCC SOC algorithm is designed to read in inverse proportion to battery voltage (imagine!) ... I usually see readings like
SOC 45% at 50V
SOC 60% at 49V
SOC 95% at 47V
SOC 100% at 46V.... what the heck!!!?

Lwkmd4h! initially I thought it's either recession was affecting my sight (Lolz) or I don't really know what SOC is again..

But then, Epsolar is a monster!!!! vomits current like kilode!

I am excited too. Thanks man.

Refa:
I missed your post. I am really excited that someone located in the GH is also interested in Solar and is on this platform. I will be very happy to link up. refa.dodowa at google mail.

It has better log function than fangpusun due to the fact that fangpusun does not have clock function and thats one of the beauties why i like it. it gives performance at intervals of 10mins which is awesome. it logs daily kwh but u'll have to view it before midnite. most CC SOC reading is not very accurate because of the size and distance of the CC-battery cables which needs the terminal voltage sensor installation cable(comes with epsolar) to improve the accuracy. secondly the amount of load on the battery also affects the SOC accuracy reading.

earthrealm:


though i hate 2 things about my 60a epsolar cc, especially the first point, its standard on MS n fangpusen CC

1. the log is not robust enough, it doesnt log daily kwh/ah harvest daily
2. its soc algorithm is wack, always wrong

I do not know which epsolar cc you use but my itracer is straight forward and not inverse.

mcTrinity:


Lolz... the SCC SOC algorithm is designed to read in inverse proportion to battery voltage (imagine!) ... I usually see readings like
SOC 45% at 50V
SOC 60% at 49V
SOC 95% at 47V
SOC 100% at 46V.... what the heck!!!?

Lwkmd4h! initially I thought it's either recession was affecting my sight (Lolz) or I don't really know what SOC is again..

But then, Epsolar is a monster!!!! vomits current like kilode!

DMerciful:
That's what's going into my battery from a 1kw system...quite impressive and its sunshine panels

thanks for adding the latter part.