@all
i upgraded my 69x with the new 132p from crosat and i experience the same issue as the one i downloaded from wizkid. The stb works fine but when blindscanning, its extremelly slow and will not bring up any channels at all.
Is anyone experiencing this.

@kinnmen2004 did your 69x not x11 bring up channels during blind scan? Pls test again and let us know.

you can installation hotbird satellite, which allow you watch jsc from 1 to 10 throught 2.4m dish

With the new 132p I blind scanned, auto scanned, manual scanned and even open eye scanning. All worked well.

on average how long does a 69x takes to blindscan,

@ All, the 132p is better than 130p. The picture improved, the audio output is louder though it have the same boot version as 130p which is 5.0. 127p has 5.10 boot version which makes the blind, manual, and auto scan to scan faster though it doesn't have picture in picture. The 127p was created to correct AAC and HEEAAC audio format which came with Infinitytv channels. In all, the 132p is better than other patch for 69x. So if your 69x reciever is not blind scanning, I advice that you take it to technician to put it inorder for you.

@all esp 69x owners

i wil repeat again , not that i have problem with my 69 but i just want know how long it takes to blind scan with this receiver

Does 4669x show with dstv card

if you upgrade with the right software it will play it

gkw:

@all esp 69x owners

i wil repeat again , not that i have problem with my 69 but i just want know how long it takes to blind scan with this receiver

i did blind scan yesterday after i read about some people having issues with their 69x , .
the results are fantanstic as far as my setup is concerned.
it blindscanned pretty fast and with more results . . i used NSS7@57^oE.

Pls help me with dstv software dat can work with 4669x

Hi all, I am trying to connect two 4663x decoders with RS232 to allow sharing. But one of the decoders always reboots and continues to reboot whenever the other one is switched on.  Does anyone have an idea what may be the problem?  The two of them used to work perfectly before but I recently upgraded one to software version 1.70p.  The second one is still on 1.31p.  I am not too sure if that is the cause.  Thanks for your help & advice!

naivasha:

Hi all, I am trying to connect two 4663x decoders with RS232 to allow sharing. But one of the decoders always reboots and continues to reboot whenever the other one is switched on.  Does anyone have an idea what may be the problem?  The two of them used to work perfectly before but I recently upgraded one to software version 1.70p.  The second one is still on 1.31p.  I am not too sure if that is the cause.  Thanks for your help & advice!

for that to be enabled u have to use thesame software in both the decoders

Hi gurus in the house,please how do i upgrade my avatar so i can enjoy ds*** chanels,i have the rs cable,gxdownloader.what other software do i need and how to go about it.

google ntcguys.com for avatar issues ,

@ All Pls Advise me, Which one should i go for strong with software or extra view dstv ?

Ussals:

for that to be enabled u have to use thesame software in both the decoders

Thanks a lot. Updating the second box to 1.70p solved the rebooting issue.

@ all pls help. my three 63x shared wit rs232 for dstv are having 1.70p but the two slaves dont show all the channels. no sports channel and the others that show are randomly selected. how do i make them show all the channels as the master. pls i need your help

@ sharaff6
To save your self from stress, it is better for you to use x t r a view package. It will only cost for buying an e x t r a dstv decoder. Thanks.

Hi great nairaland gurus, pls help me on
my strong reciever upgrade, i use to
upgrade my box b4 with 9pin(rs232) plug
via my pc. I got another pc, i notice that
the pc dont have 9pin plug port. So i
decided to use usb to 9pin plug. But no
success, pls help me on the right plug to
use. Am realy worried, thanx

Peroluv! Da other alternative is if u r makin use of a smartphone then good 4 u, all u ave 2 do unzip da upgrade file from da phone by extracting , u create a new folder for da file 4 easy trace, right after dat u get a usb wire da phone plug it in on da usb port of ur decoder, Then move to data transfer of ur decoder, locate da unzip upgrade nd transfer.

@Oxteen, what happen u dont do whats app again?

@oxteen thanx for ur reply. i do upgrade my decoder with my fone via usb. what i need is usb to 9pin plug for my pc, incase am updatting my avatar or the likes, thanx

@ ussals im still on whatsapp its just dat i disable ma whatsapp application cos its run down ma data.
@Peroluv ow is ur hood in delta, u can also use any kind of sd card for upgrade on ur A****r but make sure unzip da file b4 u transfer it into da sd.

@osteen, which one is sd card. How possible can u connect it to avatar

@futoreg09.
tanks for the help. will now look for 69x to use as master. but some are still using dia 63x and its working very well. any comments on this

Has anybody bought the power circuit board of a STRONG 4669X decoder before? If its available, how much does it cost?

@all gurus in the house,pls i was told that the bigger the dish size the more the chanells you receive but to my surprise i got 16 chanells working out of about 36 on my 69z with a 90 cm dish tracking multytv,can i blind scan to get more or rather lose the ones i got?.how can i decode the rest scramble chanells,i'm a newbie on sat issue,i just need your help.thanks

jman77:

@all gurus in the house,pls i was told that the bigger the dish size the more the chanells you receive but to my surprise i got 16 chanells working out of about 36 on my 69z with a 90 cm dish tracking multytv,can i blind scan to get more or rather lose the ones i got?.how can i decode the rest scramble chanells,i'm a newbie on sat issue,i just need your help.thanks

i have an answer for you here

_http://www.nairaland.com/nigeria/topic-331903.768.html#msg9338993

nearest:

Has anybody bought the power circuit board of a STRONG 4669X decoder before? If its available, how much does it cost?

Anybody?

@All please I am having problem connecting two dish with my neighbour 4669z if I connect this dish direct to the box it shows but when connected to the diseqc no tp gives me green. Has anyone experience this?

Lov4sat:

@All please I am having problem connecting two dish with my neighbour 4669z if I connect this dish direct to the box it shows but when connected to the diseqc no tp gives me green. Has anyone experience this?

try changing d disecq switched and take note of d ports. Also try d ports 1by1.