₦airaland Forum

EgunMogaji:
Yes Sir.

Oohhh, ok something like the henco pipes used here right?
The bend makes it look like regular electrical conduit pipes.

EgunMogaji:
This is what ALL my elbows are going to look like. Absolutely no gluing, joining anywhere on the line.

Personally I think every little bit helps and it's a sum of all the small parts that makes a great system.

Is this for plumbing?

ice4u999:
abeg nor kill with laugh o " in Nigeria pipe is pipe."

Such very poor perspective and misguided misconception is something that literally bleeds my heart. I neva see country like Naija .
When i look at many high budget buildings here and see the type of pipes and piping accessories utilized in the conduiting especially lighting and knockout boxes, I just shake my head and sigh .
The problem with us as a people is that..as long as the effects of a choice or an action are not immediately or short-term visible, then it can sail.
And we wonder why standards are falling everyday

battleaxe:
steel pillar carrying tank is cast into a tall foundation. It would be absolutely impossible to drop it, modify and re-stand. Anyone with ideas to modify this, pls share.

I know it isn't a distance issue because there are other bungalows fed from a 2nd lower tank on same stand, and supply is excellent. My assumption is that because the supply is going up, against gravity, for the duplex, hence the sluggishness.
.

Your description is vague why dont you provide a picture of the setup and get more realistic and concrete input.

Travelling against gravity isn't the reason why you have low pressure.... It is the reason Why the problem is Noticeable... if water can't travel one floor up, what happens to people several floors up ?
You can have a low pressure situation and still have good supply in a bungalow, the pressure differential is optimum .

battleaxe:
The height of the tank would not make a difference in this case since the plumber still dropped the feeder pipe to the bottom before distributing.

The mechanics of fluid flow can be very simple and yet mind-boggingly complex
The pressure exerted by a static fluid depends primarily on three things .... density of the fluid, gravity and depth(height)
As applicable in this case the only variable is the height,
From The mathematical relation betwen these three, an increase in the height will give a proportional or almost proprtional increase in hydrostatic pressure (ideally).

However other factors result in pressure losses during flow,
-One of significant note is pressure loss as a result of elbows, and other such fittings. Significant pressure losses can occur when fluid changes direction if proper considerations are not made. For instance the attached pic shows two shower installations in the apartment where i stay. the pressure from the shower head in pic 2 is almost double that in pic 1, even tho they are on the same floor. The elbows in pic 1are too close and too numerous. If such wack plumbing exists on that floor you need to remedy it.

https://neutrium.net/fluid_flow/pressure-loss-from-fittings-equivalent-length-method/

Mechanically Inducing more pressure to achieve good flow on The top floor might not be safe for the rest of your plumbing.

Consistency and Quality assurance...... we deliver peace of mind.

lawali:
Good day, do you have the square LED lighting that fit in directly into electrical boxes and flush with wall?
Send details and prices of your drop & external lightings to ayobolawal@gmail.com
Hoping to receive your updated catalogue as well.

Is this what you mean?

Catalogue update
... nearing completion

abouzaid:
kai buhari, chai oga spyder, how much is that beauty going for? any idea how much those ceiling fans with lights costs now? i can't find any online.

6500 kpere,

n3xt:
Nice one. I'll like to do this in a rustic bathroom setting complementing a stone feature wall.

Another fantastic location. Compliments excellently.
Damn, that's one sexy bath tub.

twinskenny:
Very lovely are they available in Nigeria??

Yes they're in stock

spyder880:
Maybe it's the flowers, but I will love this in my dining room wall. Can we see the base without the light on. Good collection you've got Sir.

Absolutely purfect for a dinning,
Lol. That's also my favorite in that design category.... The colour detailing in the flowers is just sweeet.

Yes , you can. Lights on or lights off the designs on the bottom are very much visible, just like a normal flower vase.

Thank you sir.

lafolabi:
Pictures

White walls.....always a favourite

lafolabi:
I don't know how the price list and the catalogue will get to me.

Kindly furnish your email and I'll send you a copy.
or send a mail to buzorokeke@gmail.com
Regards

FreeWorld23:
they are beautiful and uncommon.

I like the one I circled

Thanks,
Interesting choice.
I suppose the brick patterns make them a favourite .
But i think i favor the one on the right of that tho....i like the plainness

Flawless finish.... all day everyday.
Distinctive build quality.

Wall and Garden/Walkway Lights

Good lighting is more than just beautiful looking designs.....
Any factory can churn out any design you want..

Its about "quality of finish and excellent craftsmanship".... that's what sets these pieces apart.

Thought to share this with the house
Unconventional interior lighting design, statement ....... Nonconformist
@n3xt for some reason you came to mind when i assesed this
What kind of setup do you see this working for?

Me... room with well screeded all white walls (or some sick 3d wall paper)and a TV wall with stone designs that compliment that on the lamp

Excellent piece, very succinctly. put.
The importance of quality materials cannot be over emphasized .
People complain about markets flooded with fake, yet all they wana hear is cheap ... importers are simlply in business to make money and will practically be falling over themselves in strong competition to import the cheapest... but at the expense of who??

In other countries people are competing to manufacture or import the best, here we're competing to import the cheapest .....and the trend of diminishing standards and diminishing value continues.
once upon a time any bulb you buy on the street could easily give you over two years lamp life,.... today, many of the cheap bulbs cmmnly sold everywhere dnt even last a month. Which way Nigeria

mank1234:
oga I'll suggest you start putting watermark on your images as skimanski does

oga mi infact i shock. thanks for the suggestion. I really should. I am bedazzled at the brazen display to say the least.

44chux:
Are they LEDs or not. Do they drop down like chandeliers or dinning lights etc

https://www.nairaland.com/attachments/3995834_img20160720103533_jpeg43e2834e7e8c44c214621a6809c8e5fb

https://www.nairaland.com/attachments/3995835_img20160720103442_jpeg3f6937e3f28c3747e895c6c63847d3f5

They are suspended as seen, so they do drop down
and yes, both are LED.

glcnigeria:
Sunria Limited is an engineering company per excellence.We are channel partner of ABB and Schneider electric.Hence for procurement and installation of all genuine ABB and Schneider electric products at affordable rate.
think no further but think Sunria Limited
Our services include
Electrical installation
Power quality analysis
Condition monitoring
Predictive maintenance
Calibration
Earthing and lightning protection
Our lightning protection systems can be highly individual. We make sure that each business, home or site that requires our services takes full advantage of our industry knowledge to get the best and safest lightning protection system available. Whether you are in construction on a new site, looking to improve existing lightning protection systems or are in need of a lightning protection consultant for a brand new system, look no further than Sunria Limited
Contact me for query and advice
Jerry.ajiboye@sunrialimited.com,
ajiboyefjeremiah@gmail.com
08134143928

folks need to be very wary of this individual....
I cannot begin to phatom what manner of bussiness man you consider yourself to be.
the sort of desperation and agressiveness you employ is all but irritating and telling!!!.
First you hijack topsy's thread, then you try to steal his customers , now you resort to stealing my images and falsefully using them as yours?!! oga you no get your own market?
Practically Tells what kind of person you are.
who the fvck is this guy thats been running amok in this section all day.

@topsy23, i do not understand why you tolerated that kind of invasion and callous action on your thread.
@ glcnigeria or wetin you call yourself ..Oga , immediately desist from using my goods as content or lurking on my threads.


[size=12pt][/size]

44chux:
Which type are these

How do you mean

kopell:
Can you post the current price of Coleman too, I believe one may get better price if buy direct from their Company.

The prices posted by oga spyder were the prevailing rates. Give or take a few hundred ,

And no serious company will retail to you at a price cheaper than what you normally should obtain from thier distributor, that would be sabotage .

mufutau55:
Thank you very Boss... the threat no kuku work sef. But happy that we are back to normal now..
No, no choice of Nigerchin.. it's just that all my previous project I have used Nigerchin. But I can use also Coleman if the price is good.
Thanks for the above quotes response.

Hajji M.

You're welcome sir,

spyder880:
Coleman
1.5mm- 4500
2.5mm- 7500
4mm- 12000
6mm- 19300
10mm- 31,000

Cutix
1.5mm- 5500
2.5mm- 9100
4mm- 14500
6mm- 21000
10mm- 35,000

These were given to me on Saturday, allCopacetic, I will need to call you again soon for an impending supply.

yh, you're right on the range.
If whoever provided that price is a genuine distributor, and you trust him, You need to buy the cables ASAP boss. You might hear differently if you delay.
COLEMAN increased thier price today. Not too many distributors are aware yet

I'll be expecting your call sir, i later knew it was you by the way

mufutau55:
On behalf of everyone here, apologies accepted... now for the thread to move on for learning and teaching purposes.
Oga Spyder dey here dey look o... I got email from him few days ago. Thank you Sir.

Hajji M.

I simply smiled when i read your "threat" , wasn't perturbed in the least.
I know you were just trying to startle the group to its senses. Too much of the drama was destroying the common interest.

1.5mm- 5000
2.5mm- 8200
4mm- 13200
6mm- 20000
10mm- 33,000

The above is Moses Adebayo's current. according to his sales rep. You could still try some other distributors tho, you MIGHT be able to knock off sm change.

By the way, any specific reason for your choice of Nigerchin over COLEMAN ?

Sophisticated Simplicity
Gate Lamps/ pillar Light.
Stand Out From The Crowd

EgunMogaji:
It's for the time being during my thrice yearly visit to Nigeria.

Ok,

It'll also be useful for any 220 equipments, IF/When you finally decide to go on 110

EgunMogaji:
Small world.

Schneider owns the Square D brand of the main breaker boards I'll be using.

That's correct.
Schneider has acquired almost half of the major electrical equipment brands in the world.
They mean business.

Light Affairs

deepleke:
Kindly send me the catalogue and pricelist of your accessories to lekeadeyemi@hotmail.com

Sent