TSHIRT2:

well on my 4950h,signal 6 was 3900h3750 b4 tonight,and presently signal 6 display signal 3 on 3902h4999 and signal 1 on 3891h4999.signal 1 showing madrid game and signal 3 showing sevila game

Ok

sunene1:
Chelsea vs nothingam live now on mcot family .man united vs Burton on mcot HD @78e

Mcot family key please.

TSHIRT2:
signal 6 on10e now signal 3 on 03902 h 04999 with increased signal of 90% on 3m.those with 1.8m shd check if it is back with good signal

It's not, they usually have two TPs. That is the second one.

Someone should help me with patch code for Tiger decoder.

Ojochogwusunny:
Good evening to you sirs! You guys are doing a great job here.an hour ago i track ses5east and eutelsat7east using 60cm startime dish and lnb for my neighbour. but i have tried using my space 65cm dish and strong lnb short neck i wasnt able to track 5east and 7east together,is only 5east that came up.pls help!

There is nothing you can do, it's possible on certain sizes of dishes. You can get exactly the one u mentioned or you use DSTV 90cm.

Mourino:


Thnx so much for your reply. I experience this on my Qsat Q11 decoder. Some channels(CoreTv News, Galaxy TV) are not showing on MultiTv, of which they were showing before. Is it LNB or diseqc, or why could be the issue

You need to visit a decoder technician.

lincolnola:
Gurus,

Please urgent help for a brother......my SRT 4922 only blind scanning only 2 lower TPs and keep repeating same stations severally.e.g
If I blindscan multi TV,it keep scanning from lower TPs only upto 12525v30000 and keeps repeating same channels within that frequency range (stops over and over at galaxy channel,no Joy prime and all the rest again.
I factory reset, no headway and am running patch 197p .

From experience, this issue is usually not caused by software. It could be signal fault though strong normally don't have this problem which is common with Qsat but they all have signal IC in them which can result in selecting few tps when it's faulty.
If the TP you are seeing after blindscan is lower than its usual % and some tps don't come up when you insert them manually, then it's definitely signal IC but if you can get them manually them it's software issue. You can try upgrading or downgrading.

sunene1:
If u are still watching laliga match now on signal 3 @10e on 1.8m pls indicate for the house to know the next line of action.

The signal reduced but it's still watchable with 1.8m, it just requires little adjustments. If your LNBF plate is plastic, swap it with glass. Make sure your TVT is not less than 70%, the feeds signal will come up.

Dlee1:

Hello yawwilson,
have you used SRT4955 receiver? I so much detest that receiver most especially when using it with Cband satellites. The horizontal transponders wouldn't turn green except one changes it to vartical and vice versa to the vertical transponders though I stand to be corrected. I don't have it but my neighbor who is using it have been complaining a lot about the receiver.

I actually thought that decoders have nothing to do with changing polarizations, this is mostly caused by LNBFs type and LNBF's plate placement.

These Strong software developer always release softwares to benefit the Strong Company's market. From selling 4922a to 4950 to 4955. Why not release 4950 first before 4955. Imagine how many 4955 boxes they will sell this week and beyond before releasing 4950 software. Personally, I am more interested in getting T3000, I think this box has it all, worth it's weight in gold.
Though I am not planning to discard my Strong boxes and Qsat. Wow! I can't count how many decoders I have now. I hope I don't make my wife angry adding more, she always thinks that it's waste of money, of course she doesn't understand.

HAH:
30k here in kd, the ultra is 20k

And Lagos is selling 37k. The difference is too much.

davidic002:
@chinedu7 my 4922a refuses to blind scan only shows insufficient tp memory. how do l correct that pls l need help on that. thanks

Delete stale Tps from stale satellites. Delete about 10 and blindscan if it doesn't work delete 15 and check until it can blindscan again.

sunene1:
Sony group want to do us proud Sony Espn Tuesday 12/9/17. Celtic vs PSG. Sony six Bayern vs Anderlect . Wednesday Sony Espn13/9/17
feryanoord vs man city source.........


livesoccertv.com

SONY SIX? Cricket never finish?

Nesino:
Pls somebody wants to sell this dish . pls wat size and type of dish is this

It's 2.4m Comstar Mesh Dish. It's actually one of the best 2.4m Mesh dish I have come across. Most brands start losing grip of the net when old but this one is very durable. If the net is still intact and strong, you are good to go provided the price is good.

Obascoetubi:
name those lndf

I once bought one in Onitsha named Goldstar, it was very light and did both V & H without plate. Infact the LNBF came without plate in the park but why I never talked about it or ask anyone to try it is because the signal strength couldn't match that of Strong or Supermax. So it's useless to me.

life707:


When unscrambled, past matches and mainly live Bundesliga matches.

I believe they also show EFL and FA cup and in English.

I got lucky to watch the last season's FA cup final which I posted the pictures.
Its a funny feed coz they show everything inside the locker room of the players before the match, then even after the match.

I made some effort to see if I could get a device that can generate d keys but discover that for feeds, its more difficult than unscrambling regular channels as most gurus said due to changing VPID, APID etc for feeds, a device that autorol won't work.

It requires a dedicated satellite PCI card and a PC with at least 4gig ram and will take several hours.

Tried laying my hands on a specific type on eBay but had to let it be.

Nice one. Thanks for the detailed explanation.

@Life707, when scramble what do they show on that Feed 1&2 now. It's almost 4 months I checked it last.

life707:

No keys. Just opens on it's own occasionally. Now goes red too for days unlike before that it is constantly green.
Well let's wait and see if someone can rescue the situation

OK. Thanks.

Monlo:


I tracked mine without it and it is loud and clear.If only you could view my attached pictures before now on this thread.
Thanks,all the same,you have been an inspiration to this thread.Enjoy

It requires plate but few selected Cband LNBF can work dual purpose without plate, they are built that way, regular LNBF requires plate for 0.8w.

Can someone help me with biss key for Feed 1&2 on Africasat 1a.

kd10:
I greet all the Guru's in the house @ obnnelly, George D,Chinedu, lamtam,Suanne1,graphicion & all pls I need help on the picture of Dish position of AFN Package on Thor1 0.8west Cband.Pictures plssss to enable me track it,Am using 1.8M dish location Accra. Thanks

You don't need pictures, your lnb must point to the sky. But if you find it difficult then, I'll advise you to track Ses 5e which is very easy, remove the Kuband and insert Cband, lift it up a bit, and it's done.

Someone should help with working Biss for Gazi.

samhwande67:
pls sir, must I use the LNBF without plate to do the magic; cos I tried it with the one that has plate to no avail.

Must be without plate.

IT4ALL:

How many meter dish bro...weldone

2.4m Mesh

Just finished tracking GAZI for my Brother only to realize that it has been scrambled. Not a good experience at all. Meanwhile, for those finding it difficult to track, here is the secret >
Apstar is a strange Sat, most channels there aren't on the same line, For instance if you are on AXN, your Disney will reduce then you need to tilt up for Disney to reach maximum and AXN will reduce.
This is the case with Gazi, for sure you track with another TP like Channel 9 but you can't get Channel 9 and Gazi at their maximum at the same position.
Hence, after tracking Channel 9, try to achieve at least 57-58%, then lift up your dish slightly up that Channel 9 signal will come down to about 52%, Gazi will surface.
Note: This is specifically for dish without Jack. Those with Jack can easily tilt ⤴ up.

donqx:


dude. don't mind that fabianc.I have stated here in earlier post believe it or satelite.any satelitr tracking depends on location.its just like mtn glo eti and airtel network. there are faster and good reception in some location and not really good in some.

about nigcomsat.in as much as it is easy to track in some peoples location who comes online to run their mouth. it is not easy everywhere as I can confirm this.I have tracked this nigcomsat satelite in some locations and got it in less than 15minutes and was shocked when I got to other location in same enivironment and it took me 3 days to nail it. nigcomsat is not a stable satelite yet though doesn't fluctuate like before but its not very stable coz reception isn't strong everywhere. my advice to anyone facing difficulties while tracking to use 12616 v 12500. you will hit green fast .this is same position with nigcomsat but no channels.just tightened your dish and. input 12518 h 29500 signal will go red.don't move your dish.just hold the rod you tightened lnb to and force shift it to right a bit.just. a bit.the green will come.note that the rod is iron.force shift (like bending) while dish is tightened.

fabianc.u need to go to one area I can't mention here I bet you won t even get this satelite atall not to talk of in a week.try and experiment is several location before you run your mouth.

Bros, satellite signal isn't antenna signal. If there is signal in an area, it's there unless there is environmental factors blocking the signal but it's mostly common with Cband signal less so with KUband signal. The problems u might encounter could be as a result of dish or lnb type not difficult or poor signal.
Note: If a certain area doesn't see the signal, it means it's not there not that it's difficult to track there. Note the difference.

Dlee1:


Bro, don't get confused, CHIEDU 7 claimed to be in UK while the popular CHINEDU 7 is here with us. Try and check the spelling of their names.

Good point and observation.

captainus:

@ chinedu I use 2.4m solid dish and the attached pictures are for Gazi TV at apstar 76.5 east.My location is southern Ghana

Got it too on Mesh 2.4m during Chelsea match after LNB tweak. They were reading news while showing match in a tiny screen on the left bottom of the screen. Strange but still useful. I guess this can work on 2.4m and above. 1.8m solid can try too, not ruled out for now until proven impossible.

logonlaredo:

check FTA live matches announcement thread

I have seen it before but you are missing something. It's not that it exists but with what because with 2.4m I couldn't get Ghazi TV there which I heard of last season. It's like Sony Ten, which is there but unreachable with less than 3m. I will surely give it a try if someone confesses receiving Ghazi on 1.8m or 2.4m. For now, it doesn't worth reaping up my setup alignment.

lamtam:

They show only man utd match yesterday

Which particular channel and at what time did they show it? I hope it's not delayed.

A lot for people jumping into the Apstar bandwagon but I didn't see any EPL on it yesterday ooo.

Freshclean777:


Thanks.
Please, how to place the two Cband lnbs on the dish to receive the two polarizations. I have a 3m dish. Is superjack 24" is good for the job?

3-in-1 motorize setup.