₦airaland Forum

DatechMan:
There is nothing fair in life.
Good luck to the guys in Osogbo.
Field related questions do not mean the questions were tougher. Left to me I'd prefer the field questions.
Unless one has read and memorize those GMAT questions they're hell tough or discernible.
All my fellow Gate Crasher, where ya all?

my concern was nt toughness of d test but d standardization of it by dangote. I cudnt have imagined dem using two different set of questions to assess candidates seeking same position who wrote in a same day. all da best to y'all as we await result to proceed to interview stage.

DatechMan:
Just finished the test.
Kudos to the Gate_Crashers Association.
At least I was the Co-ordinator of the Gate_crashers today at Dangote Steel Company Osogbo.

This DANGOTE HR are just fucking damn too lazy. They set the question verbatim without even omitting commas from the GMAT / Master Job Aptitude Test by IEC publication. I can tell you the page each of the fucking questions are.
Anyways, I didnt read that book until after the test and a friend pointed it out. I was just disappointed
I thought they would do better.
Good luck to you guys. Including myself if I somehow miraculously passed

Coordinator
Gate Crashers ^R

u mean u were given GMAT questions when others in lagos were given field-based questions to tackle? dat is funny

morewealth:
Its a technical problem that would hopefully be fixed. Like I said he should try refresh the homepage and maybe you call the attention of sure-p to it.

thanks

Edokpia:
. He should call surep technical dept,they will help him out.the no is 08105576779 when it rings he should press 1 for technical issues they will fix it for him.

thank you.

morewealth:
Yes it is dangerous. He should be refreshing the homepage to see it the submit botton willll appear before the deadline

aiit thanks. but he said he kept checking the site repeatedly on that day but nothing of such appeared again. dunno how to fix d prob now

morewealth:
You mean he has saved and not yet submitted? For even saving it will reflect in your timkeeping\feedback.

i think dt is what he was able to do and he said he didnt see submit button. is it not dangerous?

morewealth:
You mean he has saved and not yet submitted? For even saving it will reflect in your timkeeping\feedback.

i think dt is what he was able to do. is it not dangerous?

my employer cudnt submit our timesheet after filling it for individual yet it has shown on my gis page timekeeping/feedback dt dey hav submitted my feb timesheet. hope it doesnt have any effect on payment guys?

dee1wolex:
u ar nothing but clueless id.iot like ur mentor.....u shud hav ask questions instead of responding as if u knw wht me and pple lik me ar going thru. Go to lagos and hear diff stories. If u care to know....i was matched on 12th nov 2014....i hav worked diligently and up till today i hav not received one naira...my boss is doing the right....i hav bn to dia office here in osogbo....alot of steps hav bn taken....i even called the surep contact numbr....the abuja respondent even spoke to my director and got my details all over again....uptill now...nothing has happened.
So plz....start being reasonable....i didnt jst say dat. I used the word 'almost' because i knw som pple ar getting paid but wht oda word cud somone in my shoe use other than scam?

i can understand ur feelings bro. it seems we were matched on d same day. i was not paid too until osogbo office helped to send my complaint to abuja. even with that,am still being owed nov and dec stipends. dont give up because i can imagine how u wud feel if 5mths alert enters at once. i believe surep has money to pay but organizatn prob is d prob dey hav. i hope uve got ur training allowance?

pls who knows d address of surep in ibadan. am aware dey share office with NDE in osun state but i wanna know their state office in ib. it is urgent plsss

aribitoye:
As far as I know, results are not out and no one has been offered employment yet. Make una chill biko

toooh. we keep our finger crossed while waiting for school to decide. i just hope abuja list will not replace interviewees that really came for d interview because delay is somehow dangerous in naija and it seems d more u look,d less u see. thanks for ur response engr and we hope u keep us updated as things unfold

@engr aribitoye. pls update us on d interview result as soon as school decides. pls ur informatn is crucial at dis present time so dt we can know who and who dey have offered d job.

any latest info frm dis firm?

puntersmind:
Notice: All those who have been bombarding my email for fresh match/Rematch, now is the time to send me your info. It's becoming increasingly difficult for me to pay attention to this forum, so I am gonna help match prospective interns for the LAST time. I will also Rematch the rest, as long as they provide company information for the rematch. SURE-P GIS has put a temporal stop on Matching/Rematching until fund is approved for it by the National Assembly. They can only continue paying interns that are already engaged in the scheme. I would however, conduct final Match/Rematch for interns in here. Instructions: 1. For a fresh matching, provide the company information for such matching (Company approvals is suspended for now). 2. For Rematch, provide the information of the company you were manually matched with at an internship fair venue. 3. Company information should be provided in this format: (i) Name of Company (ii) Address of Company (iii) Name, Phone Number and Position of a contact person in the company. 4. Approved hire limit of such company 5. Number of interns currently engaged with the company. Company information with interns data should be sent to my email address directly. If you have not had any email correspondence with me yet, then drop your email address and I will contact you. I will give you all a 5-day window to send me the required information.
For outstanding payments issue, ensure that your employer had filled and submitted the Outstanding payment sheet and followed the necessary steps of re-marking the time-sheets. If your employer has not done this yet, beseech him/her to do so, (Even though the 9th of February deadline has long passed) it would still be treated against February stipend payment. Stipends for January has been released today, so make sure your message settings is alright. Alert things.

Cheers Everyone.

pls my employer got form for outstanding payment but he said he cudnt fill timesheet again since he had filled it b4 since last nov. just dt we no see alert. how can he get access to re-fill d timesheet?

Maryspeck:
I don't know why my Employer refused 2 fill our timesheet he was just giving us a fliping excuss dat he will fill it,up till now our Jan Timesheet is not yet fill nd 2day I's d deadline I don't know why some employer treat intern as if we are slave all becos dey are not d 1 paying us.Huh dere is God ooo.

just lik my employer too. i dont know their problem.

Gherrokid:
So u mean d interview was conducted for 3days? I thought it was only Wednesday n Thursday. But what surprises me is dat we were about 11 on d list dat Wednesday (as at when I finished mine).
let's just keep our fingers crossed

am sure of wed,thursday and friday. dt is if dey didnt do another one in d week dt followed. job agencies here like to take graduates for granted. i hate dt habit of keeping mute after someone has wasted his time to honour their invite. i even tot hr of mp infrastructure called directly b4.

Gherrokid:
@ dhope any feedback from the interview? The interviewers sounded as if they were gonna give feedback soonest. Have you heard from them?

dey havent called me. i saw them more of popularising their recruitment agency than being serious with meeting client urgency for getting dem new employee. imagine dem having time to conduct interview for 3 good days inviting many pple for vacant position dt might nt be up to 3.

mrking3:
@OP! Nairaland is populated with unemployed Graduates and E-warriors!! Just as someone rightly pointed out, those that will give u job aint on this platform. I hope the number you droped there aint your direct contact? Coz you'll only make yourself vulnurable to scammers that would be sending you all sorts of job adverts!!! I would suggest you create an account with LINKEDIN its one of the greatest platform to get noticed by employers. You'll find all Professionals there!! That site is one of the best things that has happened to me! Most CEOS and HR consultants are in my Network! So they send me job openings from time to time. I got my first Job from that platform with a Telecommunication company as a CCR.

Secondly, try and visit firms to drop unsolicited cv with them! Especially this january - february!! Most firms will need to recruit new staff. Not all jobs are advertised! If you're determined and focused, you'll get there. This days its not really about good grades bro, but has to do with Connections and good networking. I had a 2.1 also! (4.2) CGPA but was jobless for almost 2yrs after Nysc!! So bro! Keep up the Hussle! Your feature is bright!! MOST IMPORTANTLY!! Put GOD FIRST!

thanks for ur comment.

seedgreen:
hmmmmmmmm.....
I hope u can be trusted.....?


anyway, send me a pm.....
or reach me with this line 0708 792 4839 within 4-5pm it will be available.....

aiit. av sent u a pm and i will give u a call in d evening. thanks

eskober:
u r a greedy guy. I first to comment on your own topic, I Na wa o

in what way am i greedy? pls i dont understand your point

.

pls and pls. help my situation

I studied mechanical engineering in a federal university of tech & i graduated wit 2.1.Due to my desire to excel in dis field line,av engaged myself in a form of an intership program in a machine fabrication firm for d past 3 months but i really need a job at dis time to pay bills in order to survive because i dont have dt financial supporters/benefactors around me due to my family status and d firm av attached myself with can't afford to add me to it's workforce. My skills are but not limited to these:
i can draw using autodesk inventor and autocad.
i know fanuc code(G&M) and can use it to program cnc milling and lathe.
i can use microsoft office tool together with microsoft project.
i can perform welding operation together with drilling and other workshop operations.
IF YOU ARE WILLING TO ASSIST ME,PLS CONTACT ME ON bestwinc(at)gmail(dott)com. and 0,7,0,8,5,0,6,5,1,7,0..
i reside in osun state and am ready to relocate to any part of d country aside north east and west.

PLEASE I'm not interested in MLM of any form. I don't disrespect ur job but it is just dt i don't have passion for any networking job be it gnld or whatever d name is.
If ure a scammer too pls don't disturb urself because i dont have a penny to give or pay u in advance of anything u get for me.
I'd appreciate any assistance u can render me at this moment. May God bless u too

I studied mechanical engineering in a federal university of tech & i graduated wit 2.1.Due to my desire to excel in dis field line,av engaged myself in a form of an intership program in a machine fabrication firm for d past 3 months but i really need a job at dis time to pay bills in order to survive because i dont have dt financial supporters/benefactors around me due to my family status and d firm av attached myself with can't afford to add me to it's workforce. My skills are but not limited to these:
i can draw using autodesk inventor and autocad.
i know fanuc code(G&M) and can use it to program cnc milling and lathe.
i can use microsoft office tool together with microsoft project.
i can perform welding operation together with drilling and other workshop operations.
IF YOU ARE WILLING TO ASSIST ME,PLS CONTACT ME ON bestwinc(at)gmail(dott)com. and 0,7,0,8,5,0,6,5,1,7,0..

PLEASE I'm not interested in MLM of any form. I don't disrespect ur job but it is just dt i don't have passion for any networking job be it gnld or whatever d name is.
If ure a scammer too pls don't disturb urself because i dont have a penny to give or pay u in advance of anything u get for me.
I'd appreciate any assistance u can render me at this moment. May God bless u too

I studied mechanical engineering in a federal university of tech & i graduated wit 2.1.Due to my desire to excel in dis field line,av engaged myself in a form of an intership program in a machine fabrication firm for d past 3 months but i really need a job at dis time to pay bills in order to survive because i dont have dt financial supporters/benefactors around me due to my family status and d firm av attached myself with can't afford to add me to it's workforce. My skills are but not limited to these:
i can draw using autodesk inventor and autocad.
i know fanuc code(G&M) and can use it to program cnc milling and lathe.
i can use microsoft office tool together with microsoft project.
i can perform welding operation together with drilling and other workshop operations.
IF YOU ARE WILLING TO ASSIST ME,PLS CONTACT ME ON bestwinc(at)gmail(dott)com. and 0,7,0,8,5,0,6,5,1,7,0..

PLEASE I'm not interested in MLM of any form. I don't disrespect ur job but it is just dt i don't have passion for any networking job be it gnld or whatever d name is.
If ure a scammer too pls don't disturb urself because i dont have a penny to give or pay u in advance of anything u get for me.
I'd appreciate any assistance u can render me at this moment. May God bless u too

I studied mechanical engineering in a federal university of tech & i graduated wit 2.1.Due to my desire to excel in dis field line,av engaged myself in a form of an intership program in a machine fabrication firm for d past 3 months but i really need a job at dis time to pay bills in order to survive because i dont have dt financial supporters/benefactors around me due to my family status and d firm av attached myself with can't afford to add me to it's workforce. My skills are but not limited to these:
i can draw using autodesk inventor and autocad.
i know fanuc code(G&M) and can use it to program cnc milling and lathe.
i can use microsoft office tool together with microsoft project.
i can perform welding operation together with drilling and other workshop operations.
IF YOU ARE WILLING TO ASSIST ME,PLS CONTACT ME ON bestwinc(at)gmail(dott)com. and 0,7,0,8,5,0,6,5,1,7,0..

PLEASE I'm not interested in MLM of any form. I don't disrespect ur job but it is just dt i don't have passion for any networking job be it gnld or whatever d name is.
If ure a scammer too pls don't disturb urself because i dont have a penny to give or pay u in advance of anything u get for me.
I'd appreciate any assistance u can render me at this moment. May God bless u too

I studied mechanical engineering in a federal university of tech & i graduated wit 2.1.Due to my desire to excel in dis field line,av engaged myself in a form of an intership program in a machine fabrication firm for d past 3 months but i really need a job at dis time to pay bills in order to survive because i dont have dt financial supporters/benefactors around me due to my family status and d firm av attached myself with can't afford to add me to it's workforce. My skills are but not limited to these:
i can draw using autodesk inventor and autocad.
i know fanuc code(G&M) and can use it to program cnc milling and lathe.
i can use microsoft office tool together with microsoft project.
i can perform welding operation together with drilling and other workshop operations.
IF YOU ARE WILLING TO ASSIST ME,PLS CONTACT ME ON bestwinc(at)gmail(dott)com. and 0,7,0,8,5,0,6,5,1,7,0..

PLEASE I'm not interested in MLM of any form. I don't disrespect ur job but it is just dt i don't have passion for any networking job be it gnld or whatever d name is.
If ure a scammer too pls don't disturb urself because i dont have a penny to give or pay u in advance of anything u get for me.

@op. ure surprised because u dont reside in osun(i guess). he did dt times without no when he was campaigning for his 2nd term here. dt baffles me if i hear these pple painting demselve with change colour dey think we need. dey are all d same. a pot calling kettle black

dont mix things up. GEJ only said he once had no shoe but we saw shoe in his leg when he contested in 2011. d same cant be said of general. for those pple justifying admisn of GMB to US college, he cud hav presented real or fake o'level as there was no such procedure to call for transcript unlike tertiary institutn. am nt saying he used fake result, but if i were him i wudnt hav allowed dis issue to bcom an embarassment to me b4 putting pdp to shame by showing dem a copy of my certificate. afterall it cost him nothing to do that

Epignosis19:
I read mechanical engineering too

i hope u went for d interview. i hope u answered their site power design questn? me neva get dt experience b4 o

bookiee:
have been to their lekki office before.
Company looks tech

thanks. i tot as much based on my discipline.

Epignosis19:
I guess ur interview is on Friday, I was also invited. I don't have much info abt them but I hrd d place is close to TBS, get to cms and ask

mine is even 2moro but i dont think am going yet. what did u study? i read mech