₦airaland Forum

Pls can I get a cake mixer, complete and tested?

60k

shams040:
The following are the reasons why your building plan approval take long to be approved in Lagos & other states;

1. Not charting your land: charting is wen the surveyor at the planning office helps you check d status of your land may b it under government acquisition, d type of land use dat ur land can be used for.

2. Not pre-screnning your drawings before submitting to approval: pre-screening is when your architectural drawings, structural, electrical or mechanical drawings are checked by d government specialist to check if the drawings a ok or nt, if nt ok they comment and u correct den you show dem again. Ones d drawings a ok, I promise your approval wnt go beyound 4-_6 weeks.

3. Not having correct documents like C of O, tax clearance certificate

4. Nt doing follow up: you need to have at least one person that will give you info on where you file is

For more visit www.egcandassociates.org.ng

Lalasticlala
Seun
Ishilove
Marpol
Semid4lyfe
Obinoscopy

Thanks for the info, but I thought that Lagos state doesn't require C of O for approval again.

Do they accept that e-tax card?

Acting President Osinbajo would always be associated with excellence cos not only that he is ready to work, he also got the backing and anointing of Daddy G.O. (Pastor E. A Adeboye). Hate him or love him, I believe in that man's anointing.

Read RCCG's memo concerning money making schemes.

tushbobo:
Sent... Nice nite.

I received it. Thanks Bro.

Ymodulus, you are always ahead.

tushbobo:
Seen. Will action.

Good job @tushbobo.

Pls I need an L-shaped structure with 2 nos of 1 bedroom flat at the ground floor and 1nos of 3 bedroom flat upstairs.
Thanks
Email: pepe102175 at gmail dot com

NEROSKY:
Land is ready!

Bros, don't be deceived and neither be discouraged.

That amount cannot get you a modern 4 bedroom anywhere but you can start with it.

If you are earning some income, you don't need to have all the money b4 you start.

Just for emphasis, bros I am very sure of what I said.

U welcome.

Onuokwu:
Thanks!

Onuokwu:
Please who can point me to that very useful discussion we had about locks on this thread? I didn't bookmark it at that time and 543 pages is just too much to review?

Check pages 118 and 119.

Following and learning.

spyder880:
Good one. I will be here and will help in any way possible, let the block setting be by counting, the foundation can also be done by counting. Each partition should be bargained for.

Oga spyder880, counting of blocks is not popular in the south West part of Nigeria unless you are ready to pay heavily like N40 and above per block. And the idea of using partitions here sounds strange to artisans. They prefer to give you a quote for any job and then you negotiate.

ayobami52:
The builder who want to do the setting of blocks to roofing level is billing 150k...But it's too much to me..
And how much should the DPC go for....
my brothers what do you think??

Are you going to have a 'german floor'?
Will the building have pillars?
Is the N150,000 only for block setting?

FreeWorld23:
you are very wrong using 15# per one block, with this calculation, you will end up paying more cos u can't control the cement that will be used.
In case of next time,
Renegotiate and tell them you are paying per bag of cement and your bidding shouldn't be more than 700#/ bag of cement and they "must" mould u 40 blocks per one bag or 35 blocks per one bag if u want stronger blocks. Dont let them mould above 40 blocks per bag.

Success in your project

But Bro, he said that the man collected N15 per block and he moulded 40 blocks per bag of cement. That means he actually paid N600 per bag of cement.

msogunro:
My people, I'm back with another one. You know I always have to watch my back. I feel like everyone is out to get me. My associate is very honest, but he doesn't know much about construction.

Please help me with this estimate.

I want to mould 4,100 blocks on my site in Agbowa and I came up with the estimates for materials.

Following the 1:2:4 ratio

4,100 of 6" blocks /divided by 26 blocks per cement bag = 158 bags of cement (7,884 KG or 9 tons of cement)

18 tons of sand.

36 tons of granite.

Am I correct?


cc:

HsLBroker
abdulwastecx
segzy14
spyder880

Since your associate is honest, let him get a tipper of sand (any tonnage) then give the moulders some bags of cement. Monitor them for a day or two till the sand finished, he can then use that to calculate for the remaining blocks.

msogunro:
My people, I'm back with another one. You know I always have to watch my back. I feel like everyone is out to get me. My associate is very honest, but he doesn't know much about construction.

Please help me with this estimate.

I want to mould 4,100 blocks on my site in Agbowa and I came up with the estimates for materials.

Following the 1:2:4 ratio

4,100 of 6" blocks /divided by 26 blocks per cement bag = 158 bags of cement (7,884 KG or 9 tons of cement)

18 tons of sand.

36 tons of granite.

Am I correct?


cc:

HsLBroker
abdulwastecx
segzy14
spyder880

Since your associate is honest, let him get a tipper of sand (any tonnage) then give the moulders some bags of cement. Monitor them for a day or two till the sand finished, he can then use that to calculate for the remaining blocks.

msogunro:
I think my legs are being pulled, but I'm not sure so I hope my people will be able to help.

I was just told by a block moulder that he will only make 30 blocks with 1 bag of cement and the charge is N800 per bag. The problem is I want 35 blocks per bag. Making 30 blocks per bag adds about N40K to my budget.

This is supposed to be a fixed price in Agbowa. Can anyone confirm if this is the case? Have you heard of such?

Sir, with a good sharp sand I normally mould 32 blocks 9" and 42 blocks 6" per bag of cement and the blocks are very okay. Tell them to wet the blocks for 2 days after moulding b4 sunrise.
N700 to mould one bag and agbowa's should be cheaper.

Rubyventures:
can anyone give the price of a bag of cement in your area now . Thanks

N2,150 per bag.

mayorall:
Product price: #13,270

Shipping to $60 . item weigh 9.3lbs

Thanks. The product price there is $29.49 with free shipping within US, so I guessed that the #13,270 includes the shipping cost to Nigeria.

Please give me the cost for the item with this number 272300380994 on eBay.

Thanks

vivalavida:
http://www.dailytrust.com.ng/news/business/naira-fells-to-n460-per-dollar-on-black-market/164295.html

It actually ended at N485 to a dollar.

Big hugs and love to all our gallant soldiers who have sacrificed everything to keep us safe.

Having crawled for several kilometres, I guessed, on his bum. This soldier didn't give up.

olapluto:
But why the sharp increase. I still dont have any reasonable explanation. Is Dangote importing cement now? Naira did not drop by 50% now. Is it just market panic? Cement always tend to stabilize though. Should I pause work on site or carry on?

From what I got from a distributor:

Dangote has not officially increased the price of cement but the company has refused to accept fresh payment since mid last week.

According to the distributor, it is either the company has issues with their banks or they may be planning to increase the price.

The increase we are experiencing is because the major distributors are hoarding the cement.

Once they started accepting payment, we can then tell whether the increment would remain or not.

UPDATE
The company has started accepting payment at N2,100 per bag, so the price will stable around N2,200 per bag till further changes.

Cement clocking N2,000 per bag.


It is well with us.

Ok.
But when next you are using the stairs, pls avoid the use of mobile phones and hold the rail.

herzern:
What he said isn't meant for everyone

May God bless you sir.

Daddy G.O was simply talking to his children both biological and Spiritual; and his children understand him wella.

We are here already.

Good one Hajji.

We have a long way to go in this country.

mufutau55:
I need the cost for the following Nigerchin cable materials:

10mm
6mm
4mm
2.5mm
1.5mm
Coaxial Cable

Thank you.

Hajji M.

If you don't need the prices so urgent, then I can get you the prices on/before Monday from their sole distributor Adebayo.