₦airaland Forum

Arteta99:
Please I'm having problem with my hp pavilion dv6 graphic driver. It came with Ati hd 5650 and intel hd graphics. I did an update on the ati driver but now I see only the intel graphics. Tried to reinstall using amd autodetect but says no driver found. Please help

Do a driver roll back

Right click the graphics driver parent and click "roll back driver"

Feed me back

emperorizzy:
thanks, I won't say it's really illegal, I should have my WiFi connected by tomorrow but I can't wait

****Disclaimer****
Gememerald is not responsible for any illegal acts done from any advice given.
****Disclaimer****

flinchstone:
Pls guys help me out wit this; I worked on my laptop yersterday and instead of shutting down I hibernated it. Fast-forward to this morning, I can't start up the system. The fan will just work for btw 3-5 seconds and stop without starting up. It continues like that till I remove the battery. It's hp G62 laptop. Any suggestions guys?

Probably the processor or motherboard is failing.

Can you do a cmos reset?
What it means is that you open up the system look for a lithium ion battery round in size.
Remove it and wait for like 5-10 minutes then replace it back.
Put on the system

FEED ME BACK.

emperorizzy:
yes, I have another question. If my device is blocked from using a WiFi with netgear systems, if I change my WiFi Mac address would I be able to fool the system and get connected?

Try a proxy application google it you should be able to bypass that restriction.

NB: I hope what you are doing is not illegal??
Please if it is illegal don't do it
Thanks.

emperorizzy:
It shows a red bad sign, like x, and it writes not connected.

Have you turned on the switch?

emperorizzy:
My laptop hasn't been able to connect to my home WiFi and anytime I troubleshoot it says an error is preventing Windows from troubleshooting, any fix to that?

Did you put on your wireless adapter ?
go to Control panel -> Network and Internet -> Network and Sharing Center -> Change Adapter Settings

Take a look at the wireless adapter what does the status reads?? give me feedback

olorundimu:
Yes, it does that even in safe mode.

Try performing a system repair if you have the bootable cd

Contact now to order yours we can deliver in bulk quantity.

shyna01:
there's a thread for cad engineers/designers in the career section. I think it will really motivate you.
P.s I'm adding you on bbm

Ok good to know and thanks

Horlardorjah:
Plz geeks n gurus in d house, I have a HP probook which switches itself off when I'm rendering 3d drawings on it. (Revitt architecture). It also gives sound while working on it. Please what can I do. Processor: core i3 2.53ghz and ram 2gb.
Plz help

As a professional Architect you should be using a system with dedicated video/graphics memory. (I think 2gb is too small for confirm renderings o).

Even my 4gb laptop slows down when rendering on 3ds max talk less of 2gb.

You would have to do your renderings in small resolutions probably like 320x480 for the main time till you upgrade to a REAL SYSTEM for RENDERING. 3D graphics.

In short the it was the rendering that affected the system, and if you are not careful you may fry your processor.

Look around if you can get an extensible dedicated memory graphics card.

.

olorundimu:
My Oga, thanks a lot. I have done the restore but the problems are still there.

Does it give same problem in safe mode ?

Available

Muyadek:
please help! I installed antamedia hotspot pro since then my system has started malfunctioning. the error that is flagging is that no software or folder can be opened. it is requesting for admin password which I don't know.

First do a system restore to a date before the installation

If it doesn't fix it, login to safe mode and still if it does the same and give me feedback

olorundimu:
Please Gem baba, my touchscreen hp laptop is faulty. The screen is unstable and also displays bubbles,. It spontaneously magnifies characters beyond the margins of the screen. I have not been able to study with this laptop as a result of this fault. It all started after I used an external mouse on it sometime ago. Please how do I rectify this problem?

Perform a system restore to a later date and give me feedback how it goes.

coldsummer:
Lol. Oya because of u, I go remove am. I donn tire for d clueless one too

Lol. Remove am sharp sharp o!

coldsummer:
Lol

bros why na

Graduate of Mechanical Engineering here. from Federal University of Technology Akure.
With options in Production and Manufacturing Technology

I've got specialized knowledge in mechanical CAD programs (Autodesk Inventor, Solidworks, Pro-E and 3ds Max) having completed different projects and jobs.

I do CAD designs and drawings, below are some of my works.

You can add me for personal training or group training as the case may be.

Whatsapp: 07038865067
BBM PIN: 26D9A48F

PipSurgeon:
i had to restore to a previous date. 2ru safe mode. system is now functioning well.. tanx again..

ok. good for you.

Carmal90:
this is 12 digits,instead of 11

Sorry it's a mistake. 07038865067. That's the correct one.

Go for Innjoo Note, you can order it through me from jumia with a discount of N500 and you pay on delivery.
The innjoo note is N22,999 but if you order through me you'll get it for N22,500

tohby2:
pls how much can I get a 80gb harddisk

Why not just go for 250gb hdd. If you insists on 80gb then budget around 5k for it.

Leemak:
Pls im in dilema with my system....I restarted it which makes some valuable files deleted and after dt it has started malfunctioning like hanging when working on it and not shutting down when i want. Some ar saying dt dt is one of d problems Window 8 gives and advised to change it to Window 7.....pls what can i do?

How did the files got deleted when you restarted?
Is the windows 8 activated?
Also try and perform an hard disk scan.
Also try to defrag the hard disk

PipSurgeon:
i am very grateful.. i removed cleaned n replaced d same ram n on d system.. n d screen lite up. thanks boss.. am trying to fix d user login profile now from a tutorial on google..

You're welcome and that should do

Carmal90:
pls i want to repair a dell laptop,its charging point and speakers are faulty,how can i meet you?and pls like how much should i bring along?i reside in ijora..pls reply asap,and if possibly can i upgrade from 1 to 2gb ram..pls and pls response is needed

Ok. Contact me on whatsapp 070388865067

PipSurgeon:
nope.. i havent shud i??

yes test another ram on it

PipSurgeon:
how do i get to knw d connection??

the caplock shows no light.. the light on d power on button disappear sometime for a while, .. tanx boss

there are two connections to the board from the screen power and data, by the way, have you tested another ram

funstufz:
Yeah thats true sha but which or combinations of these skills would you recommend?

Actually you have to settle down first by deciding your target; do you want to make desktop applications, websites, web apps, mobile apps, or maybe you want to administer networks e.t.c; then you try to see if there is any market for it here, (because in Nigeria here, the mostly recognized programming language is Java followed by others in terms of full fledged programming language); then you have to think on how to solve common problems with it (it may be banks, institutions anywhere); then you sell it to them; You can also delve into system repairs, installations and networking (linux and the rest).

funstufz:
Skills, you say.........

How feasible is that my brother?

I don't mind to be Self-employed too.

Thanks

Yes, when you got skills like; cad designs, systems repair and networking, programming and the likes you can freelance between different companies

Skills pay much better than all this! Imagine when you undertake 3d design jobs of more than #100,000 for three different companies or firm in one month.