₦airaland Forum

Bro Na the mc4 connectors ó. Ẹ Don burn. I have Done it the old ways like you did yours. Everything is working perfectly. @9am I am already getting 650w from 2 535w panels. In anything you do, buy original jinko panels

fuckboys:
maybe you didn't use a panel rack placing the panels directly on the roof. Check very well some wires already burned out under intense heat and touching the roof or causing bridging.

Something like this has happened to me before until I use panel rack.

Bro, it is jinko 535W. I have called the guy that mounted the panels.

fuckboys:
what type of solar panels is that?

Trace your solar cables up to the panels, or use a multimeter to check for bridges in the solar cable.

My inverter is bread, 500v max 15a max. The 2 panels are in series.

AyobamiOluwole:
What is your inverter Max Pv voltage and what your panel’s open circuit voltage?

Make una help me o

Gshems:
Guys abeg, my wife got home to see our inverter beeping with error code 04. I told her to swith off the breaker one by one till we found out that it is the pv input that is causing the fault. When I got home, I isolated the breaker cos I just got that 2 days ago (still the same). The moment I disconnected the pv cable from the breaker it stops. My inverter is currently working when my pv cable disconnected. But when the pv cable is connected it starts to hum and show fault code 04. This was around 6:30pm. I just replaced my old panels to 2 535 in series 2 days ago. Anyone with similar experience

Guys abeg, my wife got home to see our inverter beeping with error code 04. I told her to swith off the breaker one by one till we found out that it is the pv input that is causing the fault. When I got home, I isolated the breaker cos I just got that 2 days ago (still the same). The moment I disconnected the pv cable from the breaker it stops. My inverter is currently working when my pv cable disconnected. But when the pv cable is connected it starts to hum and show fault code 04. This was around 6:30pm. I just replaced my old panels to 2 535 in series 2 days ago. Anyone with similar experience

Yes.

adimx:
Did the wires become cool after the upgrade?

lungwun:
Just received word that a connection lost their home on Sunday due to Solar/Inverter/Battery system fire.

Are there any IP65 rated batteries and Inverters? If i jump into solar because AEDC are more useless than two follicles of hair, I really do not want it in my house anymore.

IP65 rating will help with outdoor placement

make people no cut cost on wires. Wires and breakers are major cause of these fires. An installer once used a 1.5mm wire for my inverter connection. Once day I went there as a curious person and I saw that the wires are burning already. The insulation was already burnt. I upgraded everything to 2.5mm.

Don't try it o.

ajabani4allah:
Pls house can I use the charger below to charge lifepo4 or lithium ion battery. I only saw lead acid in the description?

How do one know 100% copper. Tho the seller says it has 100% copper but I no get trust issues. I will go ahead with 10mm

favouredbymercy:
I used 10mm for thunder arrestor (100% copper arrestor), and 6mm for earthing from DB (both comester) with bonding done. It has been serving me well.

There was a day i had a direct strike straight on my roof, it handled it well with no damage to any device.

Just buy jinko from Fouani or cd care. Them dey sell original

adibo:
Thanks a lot for your response. I think I will just work towards getting the 715w panels and selling off the 475w panels to recoup some of my money spent back. Not really in a hurry though cus the panels are still serving me well.

Is this Jinko solar panel OK? If not, which solar panel products are original and of good quality that I can buy that are half cut mono?

Even the wire seller is saying 10mm to earth is too much. I just give am side eyes. I no want thunder to spoil my investment. I will just save and get the 10mm once close eyes

bassdow:
YES if you can't afford quality thick copper. Even PHCN / NEPA uses aluminium. It needs LARGEr and FASTer FLOW. You better of with Thicker aluminium (25mm or higher) than Thinner Copper (e.g 6mm or lower). buy the big bundle. Omo Igbo dey get 2 sizes BUT na the smaller bundle dem go first show you BUT the moment they see you knw what you want, even if you fake it, dem go enter bring am come. na just skiKiNi extra money dey on top. If possible, you could go for the much thicker ones BUT you wouldn't easily see them sold on streets, na for market or shops where they majorly sell cables you go see those THICKer ones.

BUT you do need understand connection as Aluminium cable and copper are not so friendly. You don't just tie them together. Except the person doing it knows what they doing, just TRY get Copper BUT must be at least 10mm and complete Ooo. Not 10mm that's 6mm.

You need understand what happens most times. If I were a copper wire seller, and not in a position to rely on genuine sales, I would always try make you believe COPPER cables is better in every situation even if you need hold your trousers, or lace your shoes.

bassdow:
Would say that chatGPT seems more accurate. 2.5mm is too small + a lot of them are even smaller than 2.5mm.

When e happen, it needs a large enough conductor to flow through hence the THICKer, the better. To me, minimum of 10mm. Copper is more preferable here though Aluminium can still work BUT ensure the earth rod and plate are all good copper.

that means I can use that nepa wire? Since Na larger flow e need

Please my Ogas. What guage of wire is best for earthing. My installer say 2.5mm is good, but chat gpt and other sources says at least 10mm because of lightning. Abeg make una help me

Why tubular? Get a lithium you can afford.

Beframia:
Thanks for this.
I intend using tubular batteries for now, which brand and capacity is recommended?

Una dey fight before?

AyobamiOluwole:
You and Dam5reey1 dey fight?

You bought all those stuffs from him and you can’t ask him these questions?

They only had bifacial when I got mine. Bifacial are available on other stores only Fouani no get

QuoteJust1nce:
Are they genuine panels? Yes i gotta ask as Colors doesn't even have the 535W listed

Please who sell original breakers here

How many panels do you have on

osayuwamwen:
Yes it was even the installer that tested it at first and it was showing overload, we later on the Gen to test the pump to see if the installation was correct, the Gen power the pump but I noticed that the pump power was dragging the Gen then usual, bcus na the Gen I they use pump every time I know the way the sound they be anytime I switch on pump, when the installer left I test it twice one was showing over load and the other was reading 4.1kw I quickly off the pump before I later try it this afternoon and this evening I even just try it again this evening b4 typing this to be very sure and it is pumping pulling btw 1.8kw and 1.9kw..

I just feel there are better ways to communicate what you are trying to say.

bassdow:
which kind talk be this na ?

What I suggested is it wrong in any way ?

What have I got to ggain by trying to destroy another person's property ?

Hmm abeg make una no dey take things out of context Ooo

Feel free to point out where you think I might have gone wrong. Would appologize if need be

Baba ẹ go reach one point we go dey reason if you dey hate ni. Cos this your negativity on another person inverter is somehow

bassdow:
mayBe now is time to gradually load it to see how far it can go. Just not allow it get to point of shutDown. You could one by one turn loads to see how many consecutive load it can carry before nearing high load.

BUT once again, should your load always remain less than 80%, chance of you having business with engineer would be low. Just ensure the airVents are always clean.

SomeOne still can't tell if all these are adverts

80k ish

bassdow:
why not state your max budget ?

Also state current price of the powMr controller as not everyOne knows it's current price.

You also didn't clarify if you want those of similar performance or just price range

Please guys I need suggestions for an mppt charge controller thats not powmr but in same price range

osayuwamwen:
The power factor of inverter is 1 that's what is stated in the inverter manual
The battery bms has a surge of 270amp± before striping off according to the manual
The Generator that powers the same pump is 7kva
I tink the issue is the inverter cause anytime I switch on the inverter the pump power in watt goes as high as 4.1kw before showing over load

how long did it take before CD care delivered your panels?

osayuwamwen:
But if later on I change the submersible pump to 1.5hp hybrid solar pump can the inverter still power it efficiently well without struggle ?

I think another issue is the 100a continuous discharge current that can limit you if you change the pump. But you can still dismantle the battery and change the bms to a higher one

I also do it for fun. But when you only have Saturday and Sunday before work on Monday, you will be interested in other fun stuffs.

Kaczynski:
Something your mates do for fun .

AyobamiOluwole:
If the guy says it’s 10k, and you don’t have the money , then price it to your affordable amount.

If he doesn’t agree to your bargain, look for someone else, life no hard bro.

sure bro

I DIY my stuffs.

mctfopt:
Nigerians hate to pay blue-collar workers, even those who could afford it. Oya na DIY they won't. They are always out looking for who they'd pay a slave wage.

A friend of mine studied biology in the US, but his skills range from networking to renewable energy. He has more tools and expertise than most professionals because he actually took the time to learn how to do it himself.

A typical Nigerian wouldn’t do that; they’d rather call an 'expert' and expect free labor. It’s wild how some of us operate.

Are you a handy man? Why you come carry the matter for head like so?

HawkTuahGirl:
Pay him the money, what's the problem. If he takes 16 panels up. Pay him the professional 160k.

The wickedness of Nigerians towards handyman is gruesome.

As you are budgeting for panel and battery, no budget 10k for installer, it's a professional job.

The surge power go pass 500w

HeavenlyBang:
Are you sure? I know people who say it can.

HawkTuahGirl:
You people funny sha.

You can buy panel as high as 150k. Every solar system that make sense is within 1m and above.

To pay a working man 10k is now problem.

Never said paying 10k is d problem.. The problem is that he wants 10k for each panels he takes to the roof

Omo installer dey charge 10k per panel for solar panels installation?

It cant

capnies:
Please gurus
The 500w inverter in itel power tank is that the continuous wattage or peak.

Is the peak upto 1000w
Can it power a 90w freeze due to the surge