₦airaland Forum

Oops


https://www.nairaland.com/2550211/general-topic-thread-to-discuss-anything/3789#133348190

Transforming spaces.....


Call or WhatsApp : 09122348437

Kitchen Setup

EgunMogaji2:
I’m looking for references from a homeowner or builder on a carpenter that you’ve used in the recent past.

My site is in Kuola, Ibadan.

I need an exacting craftsman.

Thanks.

PS: I’ll need a painter and plumber too but first a carpenter.

Baba Egunmogaji, Trust you're doing well.
Eku ojo meta sir.

MDDarah84:
Can one do POP before doors and windows are installed?

Yes Please.

braveboi4life:
Greetings All,

Please I need a professional advice, am executing a work and I currently want to carry out a few wood work installion for internal doors, wardrob and kitchen cabin, this is a commercial building hence it needs to be cost effective.

Please what material should I be looking out for that is less expensive and durable.For the material price range will also help my judgement

Thank you

For your internal doors & kitchen cabinets... it's imperative to use HDF board, while wardrobes you go for MDF boards

Let me reiterate again!!! I'd strongly advise HDF boards only for Kitchen cabinets & internal doors.

iamMoshood:
Guys, I'm planning to start my family house building project next week. It's 4-bedroom with a security house. Please help me assess this plan. The available land is one plot.

I Noticed your Toilets are seperate from the bedrooms.
In my honest opinion, i'd suggest you add a master bedroom to this design, even if you don't want make all room ensuite

Just got an an apartment?

We got you covered!


Media Panel/Tv console

Call or WhatsApp: zero9122348437

Intellab:
How much?

Depends on the size and design you want.

CaptainGo:
Beautiful

Thanks

omoredia:
Is this panel edible? Na food we dey talk now or. No time for panel wey person no fit eat like biscuit

Of course Not .

Rany4all:
Good morning Chief. Please do you install polystyrene parapet or ceiling?

I install both.
Good afternoon chief.

Let's set up your kitchen

Europe midfield is outstanding



https://www.nairaland.com/6534100/interior-design-project/7#130451298

PrimeQuay:
What is the cost of the polystyrene board... I hear there are different thicknesses 3mm/5mm

Thanks

Polystyrene sheet thickness for ceiling ranges from 20mm , 25mm to 30mm. (Polystyrene can be upto 80mm) but 20, 25 & 30mm is the ideal thickness for ceiling. Cost price ranges base on the thickness : ₦8,500 per sheet above (Size : 4ft width by 10ft / 1.3m by 3m)

While Plasterboard Thickness ranges from 6mm - 12mm.


Good Morning Chief.

FessBarron:
Polystyrene and plasterboard are not flammable. Remember you need to screed before painting. The disadvantages of plasterboard are: When thier is roof leakage, the water can easily spread because of the paperback making the whole board in that room to collapse.... Polystyrene is better than plasterboard... But POP is still the best because Pop can act as burglary proof...

The bolded is actually flammable Sir.

Humbro:
I think your post is misleading by saying plasterboard ceiling is flammable and pop isn't . Plasterboard isn't flammable, polystyrene might be flammable but not gypsum board ceiling. Gypsum board/drywall/plasterboard ceiling can be installed anywhere in the house and it's highly safe . Plasterboard ceiling is never flammable, you try and get the right information before coming up in the open forum to share it. Both pop ceiling/casting ceiling and plasterboard is made with gypsum.and plasterboard ceiling is equally covered with gypsum during screeding. Plasterboard ceiling is non combustible. Polystyrene itself is flammable but not Gypsum Board Ceiling or plasterboard ceiling. Whatever that can affect plasterboard can affect pop . Plasterboard is a better choice than pop in terms of easy and fast Installations, water resistant level, low maintenance and repairs . But pop ceiling has better designs than Plasterboard. Plasterboard ceiling is a better choice than pop ,just that plasterboard is more expensive . And equally there are 2 different types of plasterboard the green board and the white board . The green board is meant for toilets and baths , for its high water resistant but white plasterboard is meant for other places in the home for it lower water resistant but it has better water resistant than pop ceiling.

Polystyrene is an inflammable material✓
Plasterboard is not flammable✓

I didn't differenciate the Plasterboard & Polystyrene in my post, hence I have made an edit in that regards.

Correction Noted✓

Thanks for your input.

Cheers.

LordVarys1:
Do you advise he quit his job for it? He presently earn over 300k. Are the opportunities really much? My guy is not politically exposed. Do you think it will be a good move for him?

They're lot of opportunities in it, for him.
A larger Network.✓

Yes...it would be a good move.

Rayd502:
Someone should respond to this pls.

Done✓

Petmayor:
Pls I need advice.

Do you advise I just pay for the total amount charged (Materials + Workmanship) by the POP Installer or I should ask him to tell the specific materials needed and I buy the materials myself and then ask him for labour cost separately?

•It's okay to pay Per sqm (Materials+ Labour including).
•it's also okay to pay per sqm (Labour only) provided you can go around and source the materials needed yourself : Below is a list of the needed materials.

1 Pop cement
2 fiber = (Fillas)
3 casting board (Glass or marine board or haco board)
4 Range
5 Nails & binding wire
6 Groundnut oil
7 Bar Soap e.g joy
8 Tyrod
9 Buckets (for mixing)


I'd Recommend the First one tho.


PS : Regardless of who is buying materials, Water & Scaffold must be on site.


Godspeed on your project.

rmx:
Avoid using plasterboard in the kitchen cos it’s inflammable ? Where did you get that from ?

Polystyrene board is inflammable Sir.
Good Morning.