₦airaland Forum

Okay, thanks.

twinskenny:
Go for electric fence...barb wire rust within time..


I do 3500 per metre for electric fence.

Good morning house,

Please I need some advice about all these fence security systems.

Should I go for barbed wires or an electric fence wire system?

Please, how much does each cost per square meter or plot?

Thanks

Good evening house,

Please I need some advice about all these fence security systems.

Should I go for barbed wires or an electric fence wire system?

Please, how much does each cost per square meter or plot?

Thanks

Is Acura MDX a nice ride too?

Itsrm:
The venza and highlander that would have been good substitutes are equally as expensive if not more expensive.

How about an Acura MDX

Aaaaarghmed:
why don't you go for the rx330..its a better ride than the venza.The rx350 is way out of the venza league.venza just get fine shape but the interior materials no premium,just like camry muscle.Lexus is refined.since your bar no reach rx350..get the 330.

Thank you very much for your input. Can I get RX330 with 6m?

Hi guys,

Good afternoon

My favorite car has always been Lexus RX350 2011 model precisely. But with the daily increase in car prices, it is kind of difficult to get one. So I am looking at other options. I want an SUV. Do you think a Toyota Venza can be a good substitute?

Any other options will be appreciated.

Hi guys,

Good afternoon

My favorite car has always been Lexus RX350 2011 model precisely. But with the daily increase in car prices, it is kind of difficult to get one. So I am looking at other options. I want an SUV. Do you think a Toyota Venza can be a good substitute?

Another other options will be appreciated.

Hi guys,

Good afternoon

My favorite car has always been Lexus RX350 2011 model precisely. But with the daily increase in car prices, it is kind of difficult to get one. So I am looking at other options. I want an SUV. Do you think a Toyota Venza can be a good substitute?

Any ther options will be appreciated.

Hi guys,

Welcome to my thread!

I am Henry, and I have been working on upwork, and peopleperhour for more than 6 years. I need competent writers that can work with my agency.

Please you must be vast in:

- product review
-technical review
-landing pages and more!

If you are interested please, let me know by leaving your email here for further discussion.

Thanks!

Good afternoon smart people in the house,

Please, what is the major difference between a standing AC and a split Ac? I want to get a 2hp inverter Ac and I am confused about whether to go for a standing one or a split ac.


How is one better than the other, please?

Good afternoon smart people in the house,

Please what is the major difference between a standing AC and a split Ac? I want to get a 2hp inverter Ac and I am confused about whether to go for a standing one or a split ac.


How is one better than the other, please?

Good afternoon boss,

Please, I need the price for aluminum roofing sheets too. Thanks!

money121:
0.45mm 2800 permtr
0.55mm 3450 permtr

Okay, thank you. I am trying to do some calculations and should get back to you soon. I appreciate

money121:
0.45mm 2800 permtr
0.55mm 3450 permtr

Good morning sir/ma,

Please, how much is step tile roofing sheet?

I also want to know the different thickness available and the current prices.

Thank you.

Oh wow! I reside at Bonke.

folmus:
hahahahaha!!!, you made me miss the Amala Oyo.

I am from Oke Agunpopo ( Anpopo)

Okay, boss. Thank you!

michlins:
your tank stand is of sufficient height. Get a plumber to look at your connections

Okay sir. Thank you very much for the insight.

twinskenny:
yes boss

After erecting the stand we still.have 13 ft from ground to up. The total length was 16 and we buried 3 ft.

michlins:
the tank stand you did, did you cast a different foundation or was the 14ft height buried into the earth. If that's the case, the height has been reduced by at least 3ft

twinskenny:
Bought surface pump for mine

okay boss. And is it very effective?

From ground to the parapet tip it is 11 ft

michlins:
what's the height of your building in comparison to the tank stand

No wahala boss. We don warm am 2 days ago oooo...

folmus:
Me, I am coming to eat Amala during the house warming.

Hi, my good people.

Good afternoon. Thank you for all the advice you gave me.

I have a question, please. I bought power showers for my bathroom and my plumbers advised me to make the tank stand 14 Ft which I did. Despite this height, the showers' pressure is still low. The taps outside bring out water with high pressure but the power showers and kitchen rap dispenses water slowly. I mean the pressure is too low. The shower pictures are attached.

Please, what can I do?

Sorry for the late response. Oyo town in oyo state.

dapotemi:
Location pls?

I drilled my own 5k per meter. The company brought indian rig and we drilled 80m. However, I had to buy 7 length of casing for the areas that are not competent.

dapotemi:
Oh, I was inform I'll drill about 90 meter and the cost Ehn...no be here.
Do you mind sharing the cost and the year you did it, make I compare note..Did you make use of those Indrigs rig sir?

I am confused at this point oooo... Please,I need more explanation. I don't want to paint and start seeing my walls peeling after spending money ooo

rotecch77:
Don’t let this shock you “ the guy is right”
I mean it again he is very correct”
If Screed wall is too glossy satin paint will peel off”
It’s from experience.
So once he used sharp sand paper it will give it smooth surface with little friction which will allow the paint to hold.

Reason why you will see your office satin paint peel off on too glossy surface at time by your furniture set

Gbadex will explain very well on this I know he might have experience it too.

Okay. Thank you!

GoodFaith:
60k is not bad try Tony 08034376719
He just did four bedroom in lagos
but he live in Benin City

I am in oyo town. It's a 3 bedroom bungalow. He requested for 60k.

GoodFaith:
Your location ?
I can send you a painter
How many bedrooms and living room
What are you paying the thief

We screeded the wall and want to use satin

Hargbo:
Using Sandpaper will make it more smooth na, what is he talking about? Every professional painter knows they have to sandpaper a screeded wall before painting. What type of paints are you using by the way?

Imagine! Eh eh!!! Let me call another painter jeje...

GoodFaith:
The fool want to increase price
You need to sand wall before you paint now
The dude is robbing you without using a gun

That was what he said o. ... He said the satin paint will be pilling off if the wall is not slightly rough.

twinskenny:
hehehe how? Wall too smooth ke

Good afternoon my wonderful people.

Please, I have an issue o. I screeded the wall and now my painter said the wall is too smooth so I need to sand paper before he paints.

Please, I need professional advice ooo... Thanks.

Okay. Thank you very much for the response.

EgunMogaji2:
Personally I cleaned my house periodically especially after a trade goes through.