₦airaland Forum

OfficialAwol:
Even the one trying to teach us English, doesn't know the difference between "imaging" and "imagine"...

I suggest you find something else to blog on..

fuckerstard:
Stupid people, please anyone know how i can unlock ntel modem?

BabaAlabi:

The huawei e5573 mifi device allows access to lightening fast 4G network offered by major networks in Nigeria. There are many variants of the huawei e5573 device, and those commonly available in Nigeria include the spectranet e5573 606 variant and the MTN e5573 320 variant. The only difference between both devices is the inability of MTN e5573-320 to access Globacom's 4G band 28. It accepts 4G (and 3G) of MTN, Etisalat, Spectranet, NTEL, SWIFT but only Glo's 3G. However with Glo's abysmally poor network, e5573 320 users are not missing much.
This article covers correctly unlocking the Spectranet device. For the MTN e5573 320, I can't offer much help because, sadly, I don't have the device. If you wish to buy the MTN device for me so I can write an article on how to unlock it, your generosity would be greatly accepted *shines yellow teeth*.

Now let's get down to business.
STEPS
1. Install huawei drivers (actual Huawei Mobile Partner + Hilink drivers)
The drivers are needed to enable your computer get complete access to the device. The best way to install these drivers is to install the huawei mobile partner (in addition to the hilink drivers)
NOTE :- In some other unlocking tutorials, the file specified as a mobile partner is actually a firmware version 23.0 blah blah.
When unsuspecting users install it, and eventually flash the firmware with the Huawei E5573s-606 firmware version below, the computer loses access to the device and it shows port failed.
Link to the mobile partner here
If this does not work, download the official huawei mobile partner from the website
here
Unzip the files and then install them.
Other drivers
-Now, download latest Huawei hilink drivers here
-Download another Huawei hilink driver V5 here

2. The following steps are the same specifified in here

a) Download this Huawei E5573s-606 firmware version here. This is used to flash the device firmware to a verson which would accept an unlock code.

b) Download this other Huawei E5573s-320 firmware version here .

c) Download the Universal Master Code generator here

d) Download the Huawei Code Calculator here

3. Insert a different sim card which is not supported and connect the modem to your computer with a USB.

4. Start the Universal Master Code generator

-Input the modem's IMEI in the space specified and then click on the calculate tab to reveal a flash code.
The flash code will be needed as a password for the Huawei E5573s-606 firmware so you need to copy it to msword or notepad for later use.

5. Start the Huawei Code Calculator (which is needed to generate an unlock code for the device and is quite different from the universal master code calculator).

-Click on the read tab there to generate the unlock code and copy it down.
The reason for generating this code now is because after flashing with the first firmware, it might show port failed (meaning you are unable to progress further). However, when you restart the modem and try to connect via wifi, it might ask for an unlock code again and inserting this code might work.

6. Go to the first Huawei E5573s-606 firmware that you downloaded, unzip it and run the file P711S-E5-update_21.110.99.03.00.exe
- It will request for a password, now paste the flash code (from Universal Master Code generator) you copied as the password.
-At this point, it will automatically start updating the firmware and installing the drivers, so just wait for the process to finish.

7. After the process must have been completed, Start the Huawei Code Calculator and generate the unlock code for your device. It might be a different code from the one generated before updating the firmware.
It is at this point that most users have issues. THE HUAWEI MODEM NEEDS TO SHOW UP UNDER PORTS BEFORE THE UNLOCK CODE CAN BE CALCULATED. It starts showing port failed because the computer cannot locate the right ports. The reason is because the proper drivers were not correctly installed at the beginning of the unlock process.

To check if the ports can be accessed, press the windows key and x together. It will give a list of options. Go to device manager and click on ports. The huawei modem needs to show up under ports. Sometimes it might be under usb devices or network adapter. I had to install different versions of the huawei mobile partner before I could get the modem to show up under ports.

8. INSTALL a WEB UI for e5573 606 huawei modem. This interface will enable you connect to the device via wifi. The huawei modem also needs to show up under ports before it can be installed here .
9. Extract the 2nd Huawei E5573s-320 firmware that you also downloaded initially and then run the firmware setup file in there; it will not ask for password again but will immediately start updating the firmware into the modem and the drivers will also be automatically installed at the process. The ports also need to be accessed for this to work.

10. After the process is complete, go to your Huawei mobile partner interface and on the settings select network settings, and pop up to insert your unlock code will appear. Finally key in the unlock code that you generated above with the Huawei code calculator to unlock your device.
This part was the second circle of torment for me. After finally getting the unlock code and installing the second 320 firmware, it refused to give me the option to insert the unlock code. I wasted apprx. 3 days of my time and data researching on how to go about it. Fortunately, all I had to do was remove the USB cable, reset the modem, and switch on the wifi. My phone's wifi connected to it and I was presented with a box to insert the unlock code.

Hopefully your device has now been successfully unlocked. Don't forget to tell us if it worked.

chuhenchu:
Hello

Pls can this be unlocked

ntel 4g lte mifi
IMEI 355479026387990
Model MF75

Thanks.

please help with full details on how to crack and unlock the Ntel pocket wifi

turawafett:
Unlock your Swift, Spectranet, and Smiles etc LTE Modem.

Follow the steps and procedures outlined below to unlock your Huawei modem:


Step 1. Power off your Huawei mifi modem

Step 2. Note and write down the IMEI Number of your modem.

Step 3. Download DC unlocked Huawei Modem/router unlock code calculator for free and generate the first code for free. Since I have just one modem E5372 it's gave me 3 different codes, I use the third code i.e ALGO 3 and it's unlock my modem. So make sure you input the right imei. Make sure your phone is connected to the internet to generate the code.

Step 4. Insert any other network service provider SIM (Invalid SIM) and Turn on your mifi modem.

Step 5. Connect with the modem to your PC or phone or via the Wi-fi I unlocked mine with
My phone. I connected the Mifi wifi to myphone via wifi. If it ask you for login use admin as username and password.

Step 6. Type http://192.168.8.1 (Which is Default Interface of your mifi Router) into your browser, it will indicate an invalid or Locked SIM with a pop-up to enter the unlock code

Step 7. Enter the unlocking code generated with your IMEI from the Huawei Code Calculator

Step 8. Now navigate to ADVANCED SETTINGS >> SIM SETTINGS >>UNLOCK DEVICE >> ENTER THE UNLOCK CODE >> APPLY. Your router is unlocked

Step 10. Enjoy your unlocked Huawei LTE.

godofpc:

Iykelinus:
Dear nairalanders since I work with jumia I am willing to give anyone that makes an order a voucher worth 5000naira... Just let me know your choice and let the process begin

oladele239:
Pls i hate it when pple lie
Jumia can never sell oukitel k3 for 49000
Haba make una dey fear God

v4vendetta:
i understand what you mean but they are not like that,those praising them are actually real people they did business with...and after a successful transaction between both parties they felt the need to appreciate the dealer,just like what am doing with you right now,I've also had a private discussions with some buyers whether the dealer they bought from are legit or not

v4vendetta:
but a lot of people on that thread always give positive review about the sellers saying they are all trust worthy and all that...some will even upload pictures of their phone package when it arrives while mentioning the seller that did the work

v4vendetta:
cc Jesse8048 did you get a positive feedback from this your post,if you did can you gladly help me out

1) which of the xiaomi device did you buy

2) at what price

3) how much did he charge you for transportation

4) how long do you have to wait to receive your item

5) what method of transportation did he use,courier service or he gave it to bus drivers heading ph.

6) was the item with the seller or he ordered it for you from aliexpress??


sorry for approaching you in such manner,am in ph too planning on getting one of those phones soon... so I want to know how yours went so that I can plan myself well