Lexusgs430:



Little do you know........


Let me give you a very small lecture......... It would be brief, so you can understand very easily......


Are you listening/reading........

Removing the TS from your vehicle, increases the load on your engine....... Higher load = Higher fuel consumption....... (1)


Your vehicle would run very rich, because vehicle is running rich....... The richer the vehicle, the poorer your fuel consumption....... (2)

Excessive wear on your engine, making your engine weaker, a weaker engine would put more strain on the engine. A weaker engine would have to compensate....... Compensation = More fuel consumption..... (3)


Come back for more lectures 2moro...... Don't THANK ME.......

Please enlighten me more cos I intend buying an ES Lexus and I heard the es300 is stronger than 330.

Please enlighten me

banky3w:


1. You remove thermostat from your engine and this makes your engine always cold.

2. The engine is designed to function optimally at a certain temperature range (middle mark) but the engine cannot get to the range because of continuous cooling caused by the removed thermostat.

3. The on board computer(brainbox) will try to get more heat in an attempt to reach optimum temperature as explained in 2 above and the only way is to burn more fuel.

4. Burning more fuel = high fuel consumption.

Stop questioning elders!

I'm just asking to know bro.

I want to buy a Lexus 300 or 330, most of the used one I saw there thermostat has been removed

Lexusgs430:



It should be about 19 & 26, according to Lexus......

Has your vehicle got it's engine management light on?..

Have you scanned your vehicle?.....

Do you always enjoy your AC, whilst driving?...

Do you have a heavy right foot?...

Do you regularly service your vehicle + change spark plugs?.....

Is your catalyst converter still in place?....

Is your thermostat still in place?....

What does thermostat got Todo with fuel consumption?

GAZZUZZ:


Appart from all that, they have horrible 2nd hand value

Good evening Gazuzz please I need advice,

I want to buy es300 from a dealer, the steering is strong and he said, the steering oil has finished that he will refill.

My question is, is it normal for steering oil to finish without leaks?

Anybody can help me with an advice.

kingreign:


No, what Lexus?

It's es 300.

I want to buy it from a dealer, the steering is strong and he said, the steering oil has finished that he will refill

Please Guys is it proper for the steering oil of a Lexus to finish without any leaks?

omooyebamiji:
This is wrong as 2003 es300 uses the same 3mz 3.3L Engine.

I haven't noticed any visible difference in es300 and es330 2004 with the same body.

2005-2006 is where the change is.

Which one has fuel economy

Joshcoli:


I was taking records before at a point I just lost it, if you go through the thread you can capture a thing or two because I tried to detail every process here

Please can you answer the question I asked above about using 9 block for the building

eddybongo101:


Good morning,
I spent 983k on my roofing, 0.45mm aluminum, wood work and labour.

I also spent 97k on plumbing piping work, material and labor inclusive.

#190k on electrical piping, material and labor inclusive.

I have plastering sand on site, my challenge is d price of cement, #3,900 per bag.

It has scattered my plans, cos if I was d usual #2,500 per bag, #50k will get me 20 bags.

I pray the price reduces .

More grease to ur elbow. It's not easy this period

How did you manage to spend 973k on woods and roofing sheet

Joshcoli:


Good to hear

Price of materials are just skyrocketing
I never knew my roof will engulf more than a million, it's already costing me 1.3 for the woods and long span roofing sheet

The woods and workmanship is 550k
While roofing is costing 803k for a 0.45 long spand

Hoping by next month I will be done with the roofing

Can you tell us how much you have spent sofar, I want to start my 4 bed room bungalow soon

Joshcoli:
Another 1,000 blocks
9 inches - 600 @ N155
6 inches - 400 @ N140
Total - 149,000
Note these prices includes delivery to site

Cement 13 Bags @ 2,650 = 34,450
Water = 5,000
Mobilization = 25,000 to balance 25,000 if he actually finishes the whole blocks
Total = 64,000

Total Blocks so far i bought for these house is 3,000

I just hope i dont buy again

Please why did you use 9 inches block on a bungalow

Please guts, how do you differenciate between es300 to es330 04

euwajeh:
Please carry mechanic and make sure you do vin check . Don't forget to check custom paper it is very very important because most cars in that place don't have original custom paper , or there are under paid custom duty. Talking from experience.

What do you mean by underpaid, is it possible to clear a car if the custom paper are not fully paid

alist:
A Four Bedroom Bungalow
All rooms ensuite
Main lounge
Family lounge
Dining
Large kitchen and store
Ante room and visitors toilet
Can fit into 100by50 plot.

Can this fit into 77 by 50

okarevuJ:
5 bedroom Bungalow with pent room/attic space. Can fit in a standard 100by 50ft plot.

For inquiries
Call 07062860533
WhatsApp 08063464475
Glamordotdesign@yahoo.com

Can you be post the floor plan?

okarevuJ:
Progress on the project so far. 4 bedroom bungalow

I love this design can I get it?

segzy14:


You can use 5,6 or 9inches for the superstructure.

No disadvantages if using 5inches

Isaac393l:
4 bedrooms, 2 lounges, a kitchen, a dining,a study room and a garage . convertible to two bedroom apartments for two families.

I think your designs are expensive to build

segzy14:


If surface, you can use 5inches solid blocks.

I see a lot of people use 9inchrs here on nairaland

segzy14:


If surface, you can use 5inches solid blocks.

Thanks can 5 inches also be used for the superstructure. It's a bungalow

segzy14:


Will your plumbing pipes be surface or conduit?

Surface

darenyx:



Good evening, the last one I did at evbodia community off airport road cost about 3.5m, but for a standard house budget between 2.5m - 3m

Best regards

You did a great job here. What's the total cost for the project

Have you completed the project? Please update us

segzy14:

8.Blockwork in superstructure
a. 27 of cement@2650 = 71,550
b. 3 tonnes of sharpsand@3000= 9,000
c. 1342nos of 9inches blocks@200=268,400
d. Labour. = 70,000
Total. =N418,950

Please my engr. Said I can use 5inches block for 3 bedroom superstructure.

How true is it

We are still taking new batch

Offer is available for new batch

offer still on

offer still on

Have you been hearing of FOREX TRADING but don't know much about it or don't know how to trade and make money.

Have you been hearing of FOREX TRADING but don't know much about it or don't know how to trade and make money.
Worry no more just join our online training group .