Chriswazo: my anger is why the people d luck a local news channel whereas Core and Galaxy wey d good too no scramble. Please any help for this nut? Please o!
davodyguy: no. That's y im still doing star times subscription. but Bw tv, shows 5 bundesliga matches per week. 1 on Friday, 2 on Saturday and two on Sunday. Startimes shows all 9 matches per week
graphicicon: @odilibe, pls show me the picture of ur decoder setup if you want to track C-band satelite, i mean the LNB frequency, LNB type, The TP, pls use one C-band satelite as a reference.
kingsley6: Blue dish is abs3 3w, first dish by your right is ses 4.9e...
small antennas pointing@ Abs3a@3west...are liable to contain water during raining.. making signal difficult to receive...get your drills ready! to puncture holes on your offset antennas now!
life707: If you are using a motorized setup and u temper with the polarity setting of some transponders, channels may pop up on a different frequency. To overcome this problem is to delete the affected frequencies, re input manually and rescan or do a factory reset and rescan. I don't want to lose some vital frequencies and info on my 4930L that's why I didn't bother with resetting. Even on nile sat I get mbc on two different transponders
I didnt touch my 69xii and the frequencies are as expected. By and large those channels are free and clear on both Nilesat and badrbadr.
"seems like the receiver default lnb settings are not correct"check for 9750/10600 as universal ku lnb setting"...apart from this setting receiver will scan wrong transponder frequencies!...or check if lnb frequency corresponds with receiver lnb setting!..
Dlee1: Hello yawwilson, the reasons why disagreed with your statement was that I visited Crosat in the afternoon and I saw this...
"SRT4950H_3.39P_20151114_POWERVU.rar SRT4950H V3.39P 26112015 Support POWER VU, by : Musaab Al Hawary & Sameer009 , get The PASSWORD from Sameer009 at : yasameer@yahoo.com , Sameer has been Leaving Sudan Sat & BeWare from Thief & Not Authorised : Sudan Sat ..." .
graphicicon: @odilibe and blexxonmak, pls is it possible for me to connect 2 (4x1) diseqc switch together to have up to six ports, cos i have 2 diseqc switch and i want to track more satellite, i dont want to buy (8x1) switch for now.
if you have twin tuner receiver .....you can have upto 16 lnb/satellite with two lnb ports....or 8 lnb one tuner with 22khz switch..see pic below but this seems like old topic...
graphicicon: @Odilibe, the pcr of KTN which u gave to me, after editing it, the channel audio still skip, am using srt 4922A decoder, my decorder pids is like this: vpid= 0100, Apid= 0102, PCrpid= 0100, but it still skip after changing it to one u gave to me
But did any channel worked at all after editing? what was the audio format on channel info MPEG1 or MPEG2?if mpeg1 can you switch to mpeg2 on the receiver! did you go to the edited channel? Meanwhile i am using Linux receiver!
graphicicon: @Odilibe, pls i need the one for KTN on that problematic TP, cos is still skip audio strong decoders and even Qsat, i mean the edited pcr for KTN
What you got from lyngsat is video pid vs audio pid but check the correct pid of of voa and clouds tv..for programme clock rererence ...(pcr) pid that worked on my receiver i subtracted or minus (-9 or 10) in some cases from video pid to get correct pcr pid that doesn't skip on both audio and video...clouds tv pcr pid can range from 218 to 220 you can still tune within the range so that audio will match video...ktn pcr pid:91, it was only afro culture video pid that was same as the pcr pid at 164 which is normal, scanned pcr pid was 165...infact that Tp is Crack!
ify4king: Nothing was done on mine and it started running smoothly, I think its general.
It runs smoothly on some receivers while the audio skips on other receivers...I added channel from the tp (11140H30000) using video pid,audio pid and then modified and added new pcr pid now receivers scanned new pmt pid before both audio and video runs smoothly...check audio on other receivers...some receivers are scanning wrong pcr pid from the tp....that cause audio to skip on those channels! below are some modified channel pcr pid ....amos5!
(star movies) video pid: 388 audio pid:390 modified pcr pid:370 video:h.264 audio: mpeg2 new pmt:8190
(eatv) video pid:84 audio pid:86 modified pcr pid:75 video:h.264 audio:mpeg2 new pmt pid;8190
finally identified and solved skipping and freezing problem on continental package on some receivers on.......... Amos5@17east...11140H30000...Star movies+ now running smoothly....other channels on the same tp(11140H30000) to be solved shortly..easy step&details coming soon!...
sunene1: What is so special abt this mtn worldwide that they are changing key every 48hrs?we cant even watch 2 quality soccer simultaneusly on it.that is why i'm still missing IRIB TV3&VARZESH till 2morow
Avoiding illegal viewing that's why..Cos if you are on cruise ship and maritme only ..you will get (MTN) worldwide with a low monthly fee .now you know why they change keys often......then it is illegal viewing pay channel without subscription!
oluchicago: Didn't get your explanation on how to input autoroll keys for Srt 4922a,can u please make it more simpler, thanks
chester1983: is it possible to add autoroll key to 4920? if so please share how.
oluchicago: Didn't get your explanation on how to input autoroll keys for Srt 4922a,can u please make it more simpler, thanks
"the explanation was for linux other emu"just trying to explain how autoroll works..autoroll key may go to the var/key folder etc ..you cannot input autoroll key with remote or at the key editor ...on strong someone have to create powervu bin file with autoroll then you upgrade with usb stick for it to work ..autoroll will generate new key ..you may view new at the key editor..otherwise those autoroll keys are useless..