twinskenny:
surface

Submersible

Hello house, please what is the cost of a 1.5hp pumping machine

TheDoc:


Which one is step tile?
Pls enlighten me.

Here

Good day house, is it true that step tiles is prone to leakage

Please which QS did you engage

Rany4all:
This is exactly what went down:

Before I engaged the installer, I hired a Quantity Surveyor on this forum to do the roofing estimate for me (installer did not know this). The QS estimate for the actual area to be covered was 478sqm, but with 25% addition (making 598sqm) to account for wastes.

Now wood work for the roof was done exactly as designed on the architectural drawings (no addition or subtraction) and the final cost of the wood work was very close to the QS estimate as well.

After wood work, I engaged the installer and we agreed 200/sqm as installation fee. He took his measurements, did his calculations and came up with an area of 354sqm to be covered.

Now considering the significant difference between the figures from QS and installer, I decided to go with the installer's figure so as not to incur a huge loss, in case the QS figure was wrong. So I added 25% to installer's estimate and ordered 443sqm, which was made known to installer.

So he did 443sqm initially, and it covered only about 3 quarters of the roof. Installer then calculated the remaining uncovered area, and came up with an additional 150sqm to complete the job. This time though I decided to ignore installer's calculation and went with the original estimate from the QS and got an additional 155sqm to make a total of 598sqm.

The roof was eventually covered with a total of 596sqm, which is in line with the QS estimate.

Now, the installer is insisting his installation fee is 200 × 598 (not even 596 that did the job), while I'm insisting I will only pay for area of roof installed (excluding off-cuts), which should be like 200 × 478 (going by the estimate from QS).

I have told the installer, if he doubts the estimated area from the QS, he can repeat his measurements and calculations, but the guy is saying it will never be the same as that of the QS, that I must pay according to the total area of sheets bought.

Nor be small argument for site today o. We almost came to blows

mufutau55:


Personally, Long span and 0.55.

Hajji M.

Thank you sir

@nurey which trim of the 2010/2011 Toyota Camry will you recommend

oduncojamaica:


If you are going for step tile - minimum of 0.5
Long span - 0.45 is good

Thank you

folmus:


For Kobo Kobo, Long span is a sure banker!! The gauges are all good depending on your pocket.

Thanks

Please house step tiles or long span
0.45. 050 or 0.55

Na kobo kobo project

Remitush:
If you know you're an extrovert and you want to get into tech, find below some of the roles you should be considering:

-IT Biz Analyst( biz process, biz analyst, technical BA)
-project management
-junior technical consultant
-product management
-customer success managers
-business process consultant
- cybersecurity consultant
-sales engineer(this is hot cake)

PS: you don't need to have a background in tech to get into these tech roles!!!!

So if you're looking to transition into tech and see how your current skills can fit into these roles. And if you need help join this group (https://t[.]me/+Qj7WZx6FE0hlYjVk)

NB: make sure to remove the square bracket between "t" and "me" if you want to join the group

What about introverts

nurey:


4.5m should get you tokunbo highlander 2002 to 2007model years

4.5m can't get you a tokunbo RX330 not to talk of 350, nah naija used got you for your budget.

Not too sure of MDX price but just maybe the 4.5 can get tokunbo 2007 or 2008 sha.

For me the RX is the best choice here reliability well balanced with luxury and having a moderate fuel.economy.

The MDX is a superb machine for racers and those who want performance if you can fuel it

The highlander is just your normal run in the mill vehicle has all the works but lacks that refinement in luxury compartment.

The only other vehicle I can recommend is the infiniti FX35 it packs a punch among the bunch. Fuel economy is same as the MDX it is reliable and luxurious too and not bad when it comes to movement, parts are available but body parts are expensive though readily available

Thanks will probably stick with the rx350 naija used.

nurey:


Just maybe a 2003 to 2005 honda pilot.

But generally naija used, highlander, 4runner, Acura MDX 2007 upwards

Thanks
Budget is now 4.5m. Looking to get between Highlander, rx350 mdx Which year of these would you recommend. Or if you have have any other good suggestion.

Reliability with a bit of luxury is what i am after.

Thanks

HeavenlyBang:
Getting tired of seeing so many "2018 Range Roger Evoque or 1995 Toyota Corolla, which one should I buy?" posts.

The goal of this thread is to hold all the comparison posts, and also for those looking for car recommendations. [s]Especially since Nurey no wan follow directives. [/s]

When looking for a recommendation, please state your budget and the purpose of the car. Factors you're concerned with (fuel economy, luxury, design, drive ability, tech features, etc) should also be stated, as well as any questions you may have.

Hopefully the Cartalk gurus will have an answer for everyone. I'll try as much as possible to help with the little I know, too.

Cc: sultaan, egunmogaji, piyke, Obekediamondfuto, thebigkendo, thecar, sooperrescue, Banky3w, LeJeun3, Mayor2013, autologic, Autoelectng, Kingreign, chukel, radautoworks, opsudei1, oblo, weyreypey, razaqmb, nurey, nwanneni, Princetom1, Gazzuzz, cosplay, johnabraham, evilspirit,deedee44, carshopper, protocol, taxiappguy, ifyeez,gentlelife50, jayooh, jergermeister, lacomb, chillex8, fogman, Enyinne krisrock. akanniade10 Kashif chucsmoore, nakoks, costee, Readonee35L, shagati, timifakay, jakumo, valarinz, radautoworks

Hope I didn't miss anyone.

I need a car recommendation (SUV) with a 3m budget. Either Nigeria used or foreign used

Good day house, planning to get Toyota Camry 2007 - 2010. Which year is the best to go for and what trim

hslbroker2:
Whasapp me 09132123240.

Ibadan is big, and u may not want everybody to know your personal site on public forum, so I think it better we talk privately,my whatapp number above sir.

Thanks

I will contact you

Location is Ibadan

hslbroker2:


This is the quote you requested for sir.

3x4 @N1, 400 x 54pcs = N75, 600

2x6 @N1, 500 x 124pcs = N186, 000

2x4 @N800 x 500pcs = N400, 000

2x3 @N700 x 420pcs = N294 ,000

2x2 @N600 x 300pcs = N180, 000

1x12@N3, 300 x 30pcs = N99, 000

Total cost = N1, 234, 600

Please note that I didn't add transport because you didn't specific site location for woods delivery.

For further details whatsapp me on this number 091- 32123240


Thanks

hslbroker2:



yes sir

Okay. Let's have it

hslbroker2:
Buy hardwood (2x2, 2x3, 2x4, 2x6, 3x4, 1x12) buy iron rod (8mm, 10mm, 12mm, 16mm, 20mm local and TMT) payment on delivery,thanks for your patronage, God bless you all 09132123240.

Can I get a quotation for this

[quote author=Joyceaile post=118701211][/quote]
Do you have the s21+ or ultra
How much?

dannie007:
09152575396 Dele his the Name. He is Trust Worthy.

Thank you

dannie007:
I have someone who can give you that Job for a reasonable cost! Let's say around 50k or so if interested I will send his number across

Please send his contact. Thank you

Hello house, Please i got this quotation from iron bender. Is the workmanship charges okay? The materials are on ground

The city is ibadan

diordaves:


Are you building DIY without structural drawings? This is your foundation we are talking about, the most important element of your built.

Foundation should be designed by a specialist with regards to the condition of the soil and the expected load. Foundations are strict civil engineering science and not a topic you present for debate at the debating and dramatic society. You shouldn't be debating your foundation. You should be implementing your foundation according to your structural drawings.

It is good advice to follow due process and best practice as certified by a professional. Foundation is one element you can't afford to get wrong. I'm not a civil engineer but trust me on this Kobo kobo or no Kobo kobo.

Thank you

SurveyorGeo:


It is not compulsory you do it, but it will make the building stronger. If you can afford it, do it.

Thank you

Good day everyone, still on kobo kobo project

We plan to introduce dwarf pillars in the building (foundation level), the builder now says we will need to do an all round beam across the perimeter of the building to tie the columns together?

The question is, is this necessary? Should I do it or not.

Advise and suggestions are welcome.

Thanks as you contribute.

Goo day house, please help me look into the quotation given to me by my bricklayer for twin flat of 3 bedroom


Digging - 100,000
Foundational concrete (blinding) - 80,000
Setting of block (foundation to German level) - 100,000
Filling and pressuring (compacting) - 80,000
German floor concrete - 120,000

EgunMogaji2:


I haven’t done a setting out in a while. The last one I did was included in the foundation per block cost.

Thank you sir

ngBuild:

100k is a fair offer, setting out is just mapping out the layout, since he is not doing the foundation, anything not above 100k is okay, he won't be hiring much labourers, just him and another person. So 100k is enough, get the required materials, hammer, peggings, levelling tool, builders square, ropes and nails, and you are good to go. Some dey charge 75k self

Thank you

ollykay619:
Good day house, please how much is a reasonable price to pay builder to help with the setting out of a twin 3 bedroom bungalow in ibadan.

Thanks sirs/ma

@EgunMogaji2
@kolashangone

Also if you are a builder in ibadan or can recommend someone to do the job.

Abeg make una help me o

Good day house, please how much is a reasonable price to pay builder to help with the setting out of a twin 3 bedroom bungalow in ibadan.

Thanks sirs/ma

@EgunMogaji2
@kolashangone

Also if you are a builder in ibadan or can recommend someone to do the job.

BrickDevo did a fantastic job on my house plan project. Will definitely use him in the future