₦airaland Forum

fuckboys:
300k with installation cost included in the purchase

that nice

How much is the AC

fuckboys:
1hp whisen inverter ac, whisen is lg premium brand of ac. This ac is direct Tokunbo from alaba.

Not even up to 500w of consumption,

This is the total load on the inverter at the time.

brightk:
i beg to differ bro.. u have not even factored the temperature outside before saying this...last month december i witnessed an inverter ac `1.5hp pulling abt 1.3kw....

In Eco mode?

chosen124:
Guru in the house please ooo
I need answers

Yes, depending on some factors like orientation,cable gauge, battery resistance and maybe inverter settings

bkuranga:
Thanks for your input, I'm tempted to ask why you suggested 1.5HP, instead of 1HP for power efficiency?


Is there a problem with 1HP ACs?

The reason is the cooling efficiency at random weather conditions and as a rule of thumb in the case of inverter ACs

In whatever you do, make sure it's a 1.5hp that you get... Your 8kwh should do, I have seen someone with a similar system that run his AC from 11pm

bkuranga:
Oh, okay.
I understand that.

What's your AC model and maker abeg?
I'm running a 24V system presently with 8KWH bank. Was thinking I should upgrade before thinking about AC.


Do you have any suggestion on AC I can use comfortably with this?

dollarnaira:
12v:
50ah 133k
100ah 192k
150ah 265k
200ah 354k
250ah 368k
300ah 442k

24v?

Oh sorry about your experience

favouredbymercy:
I related my experience here sometimes ago. Error code 9 issue. In the process of receiving a new mother board from product maker from china (I had to write Powmr support. After many process of questions and sending video and pictorial evidence, they agreed to send a new main board). Still in transit since mid Oct. Hopefully soon, i will get the new board fixed and inverter back.

What happened to your 24v hybrid inverter

favouredbymercy:
I dont know why people underate that device. The thing dey deliver for my end finish. Presently, that is the only thing powering my battery (presently using our favourite 24v 3000w sachet inverter, as my hybrid is decomissioned for now). 2 Jinko 590w panels in series (SW facing), on a 25.6v battery, and all my loads are used as i suppose to including all my family COOKING needs (all thanks to induction cooking).

I like the CC finish... Your slogan here legit... Na sense dem dey use for solar matter...

🤣 na the power of redmi note 10 pro be that, actually I think the Speedtest app uses location for the test and I am actively using Bluetooth. I understand the load part anyway, thank you for the heads-up

inze:
not related but omo, this phone no go dey last battery o. Only 1phone has bluetooth+2sims+locationsServices ALL active at the same time

For context though, you could restrict both sims services to edge/2G except for when you're out of your wifi zone and want to use Mobile Data. bluetooth seems connected so i guess you're actively using it but mehn, the whole load just caught my attention and i can only imagine the battery drain

NB: Don't mind me o but you fit take am serious sha

Fremlin:
Thanks chief

This is it right

yes but that's not the picture that was used initially for the advert

Fremlin:
It's a good buy?

yes, I have been using it for a while now

What's going on

FEGEITOK:
Something is wrong somewhere.

My first post today on topic was banned.

The post asking that you answered has also been hidden.

My first post was even more detailed than the second

Fremlin:
What about ceiling fan, who knows the best ceiling fan that's efficient.

qasa ACDC ceiling fan qcf-56 acdc1

Was off 12am then came back after 5am this morning.

HeavenlyBang:
No internet service since I woke up by 5am

That's great

HeavenlyBang:
Idk o, I just saw a 25k voucher on my dashboard. Though back when I registered my agent told me I was supposed to get a free month because of a promo they were doing at the time. Likely just that.

HeavenlyBang:
I got an extra month of subscription for free.

How naw 🤣, give us the gist

nani667:
2.4GHz and 5GHz should give the same speeds tho... I get the same 50Mbps download and 25Mbps upload on both bands

Mine is different, it's on a ZTE router

This is the test results from 2.4 and 5GHz SSID respectively from my router

dere5:
Did that also

can you connect to the 5GHz network and retest?

dere5:
@oloet how far,has your router been activated,mine has still not been activated o, after 4 days of installing the router. Pon and Wlan lights are on. Wlan light blinks now and then,but it's just on most of the time and doesn't blink.

Sorry for the late reply, yes it is working right now... You need to pressure them with calls

justasitis:
You can combine 580w with 590w because the difference is negligible and they are also from the same brand.

I know, I am just an Oliver twist

FEGEITOK:
I think there is a sizable quantity of 580w mono jinko in the market right now

ah! I already have 2pcs of 590w so I can't combine it with a lower wattage

FEGEITOK:
The market has changed.

Mono will be in stock.

Bifacials sold out.

I am patiently waiting for the 590w monos

Hercules22:
It's well.

Na so Baba, enjoy!

Dharyhor:
A very good controller should be able to take it max and clip the excess without issues since the connection is within it voltage limit

A good controller will buy 3-5 units of this 😌

You are actually overwhelming the controller. 60A @12v is 720w, considering the ambient temperature during those generation, your controller is working as it should, nothing is wrong with oversizing though some controllers handle heat better

Dharyhor:
Update on this

It turns out that despite connecting in parallel, the temperature was still going up though not as fast as when it was in series. Probably due to the quality of the controller

It still went up as much as 65°c, this is mostly when panels are generating 650watts and above, at some point, I got 800watts.

What I did that helped the issue was to limit the float and absorption to 13.8v, this reduces the power I'm generating at peak to less than 650watts but solved the overheating issue and battery still gets full on time

I don't want to disconnect one panel because of cloudy days

I'll leave it like this pending upgrade

Thanks everyone

Hercules22:
Everyone knows they are hustling but from my experience with such agents they’ve always made the process faster and easier for me. I don’t know why you have a problem with them. Everyone here have testified and spoken about their importance and you still won’t agree. Just like myself and others have said, discuss with an agent or call 217, they would resolve whatever issue you have ASAP. This is my last response to you regarding this matter. All the best.

This is an account of another user, make do with the information therein whatever you want.

HeavenlyBang:
I'm not sure I agree. If you read my initial post, you'll see I had issues with installation too. I called my agent and he put me on a call with their engineering team, who in turn came the very next morning. By evening I was activated.

Call your agent, and call customer care on 217.

I read it, please read my next post

HeavenlyBang:
I've discharged at up to 80A without issues on a 160AH battery. I've charged at up to 60A from a 2200w array.

Na una dey enjoy!

This is good 💯

Unfaized:
You are absolutely right. I also have about:
3 AC's including 1 1.5hp
0.75hp pump
3 55 inches TV
2 freezers
A microwave oven
Air Fryer
Washing machine
Water heater
Electric Jug e.t.c


I use 24v comfortably with a 4.2kva inverter and 8.2kwh lithium battery. I've never had any issues.

And yes with load management because all appliances are not on at same time.

What's your charge and discharge amps like?

HeavenlyBang:
So, turns out my battery also had an issue with the terminal. The cable going out from the BMS to the negative terminal had shorted and was burnt, causing massive voltage fluctuations which was likely stopping charging.

Battery was built by isangjohnson, so he asked me to ship it out of state to him for fixes. Sent it to him on Thursday morning, got my battery back on Friday evening all fixed. Top guy. I also flashed the V6.66 firmware and hard resettled the inverter after that. It's been smooth sailing since then.