Pakingzzz's Posts

Nairaland Forum › Pakingzzz's Profile › Pakingzzz's Posts

1 2 3 4 5 6 7 8 ... 22 23 24 25 26 27 28 29 30 (of 50 pages)

Politics › Re: Aliyu Locks Out Legislators As Assembly Moves To Impeach Him by Pakingzzz(m): 4:11pm On May 05, 2015

Hello Nairalanders.. Here's the first House building machine in to be built in Nigeria.. The pix below is just what the machine will look like. The machine is called 3D house printer.
This machine will be capable of building a house from the floor level to the roofing level of a house without the direct involvement of human labour. The details are here; www.nairaland.com/2217438/sponsor-me-build-3d-house

Nairaland General › Re: INTERESTING TRAITS OF THE DAY OF THE WEEK YOU WERE BORN ON (WITH GOOD TIPS) by Pakingzzz(m): 4:09pm On May 05, 2015

Hi Nairalanders.. Here's the first House building machine in to be built in Nigeria.. The pix below is just what the machine will look like. The machine is called 3D house printer.
This machine will be capable of building a house from the floor level to the roofing level of a house without the direct involvement of human labour. The details are here; www.nairaland.com/2217438/sponsor-me-build-3d-house

Politics › Re: Governors-Elect In Abuja To Congratulate Buhari by Pakingzzz(m): 4:09pm On May 05, 2015

Crime › Re: Woman Bites Off Employee’s Ear Over Salary In Lagos (photo) by Pakingzzz(m): 4:08pm On May 05, 2015

Helo Nairalanders.. Here's the first House building machine in to be built in Nigeria.. The pix below is just what the machine will look like. The machine is called 3D house printer.
This machine will be capable of building a house from the floor level to the roofing level of a house without the direct involvement of human labour. The details are here; www.nairaland.com/2217438/sponsor-me-build-3d-house

Business › Re: Nigerian Billionaire Mike Adenuga Offers $600m For Ivorian Mobile Phone Company. by Pakingzzz(m): 4:07pm On May 05, 2015

Fashion › Re: Photos:meet The Contestants For Miss Ait 2015 by Pakingzzz(m): 4:06pm On May 05, 2015

Hii Nairalanders.. Here's the first House building machine in to be built in Nigeria.. The pix below is just what the machine will look like. The machine is called 3D house printer.
This machine will be capable of building a house from the floor level to the roofing level of a house without the direct involvement of human labour. The details are here; www.nairaland.com/2217438/sponsor-me-build-3d-house

Family › Re: What Will Be Your Reaction If You Caught Your Son Doing This. by Pakingzzz(m): 4:03pm On May 05, 2015

Politics › Re: Pastor Rejects GEJ Trekker In Kwali by Pakingzzz(m): 4:02pm On May 05, 2015

Politics › Re: Anyaoku Leads PAC Members To Bid Jonathan Farewell by Pakingzzz(m): 4:01pm On May 05, 2015

Family › Re: How Do You Handle A Very Stubborn Wife? by Pakingzzz(m): 4:00pm On May 05, 2015

Food › Re: PHOTOS: A Young South-african Lady Display Her Nigerian Cooking Experience. by Pakingzzz(m): 4:00pm On May 05, 2015

Culture › Re: Cross Cultural Marriage:interesting Tweets From White Lady Married To A Nigerian by Pakingzzz(m): 3:54pm On May 05, 2015

1 Like

Politics › Re: Jonathan Setting Traps For Buhari With Last-minute Appointments, Sack- Ikanya by Pakingzzz(m): 3:53pm On May 05, 2015

Politics › Re: Meet The First Nigerian Female ISIS Terrorist by Pakingzzz(m): 3:52pm On May 05, 2015

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 12:44pm On May 05, 2015

I don't think i'll publish all the specs i had wanted to, for i am being asked to close this thread. But the little i can, i will do.

Science/Technology › Re: The Making Of A 3D House Printer In Nigeria. by Pakingzzz(op): 12:35pm On May 05, 2015

litaninja:
I'm sure there has to be a point here better than me listing out a bunch of CNCs...

Ok, just need someone good in C and C++

Science/Technology › Re: The Making Of A 3D House Printer In Nigeria. by Pakingzzz(op): 10:02am On May 05, 2015

litaninja:
I'm an Engineer sir, I have worked with and programmed CNCs...

Thats quite interesting.. What type of CNC have you programmed?

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 5:53pm On May 04, 2015

The height of the crane will be 18ft, though i have it in a way it can be extended by adding more section.
The lengthwise of the truss span will be 54ft long.
This 54ft length truss would consist of 3 sections of truss, bolted togerther. Each section of truss would be measuring 18ft..
The sectioning of the truss is to aid transportation of the parts to erection site.
If the building to be built is wider than 54ft, the truss can be made longer by attaching and bolting more section of truss together.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 5:39pm On May 04, 2015

Some people in their mails to me, said they couldn't offer technical supports because i didn't include the measurement specs of the 3D printer..
I have given it quite some thoughts. It looks like that would be putting the blueprint in the open.. But perhaps i now will.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 2:56pm On May 04, 2015

Priced these H beams lately.. I would be using them to hold the truss on both ends.

1 Like

Science/Technology › Re: The Making Of A 3D House Printer In Nigeria. by Pakingzzz(op): 10:41pm On May 03, 2015

PERFECTION88:
Hello pakingzz, first and foremost I would like to say that I am impressed by your technical knowhow and ur ingenious projects(wireless RC helicopter). I know very well d level of work u must have put in them because I have been handling the design and fabrication of complex machines myself. Don't mind d people who say that ur project can't be done, I know very well from experience that it is very possible. keep up d good work and if u need any technical input, don't fail to notify me @ embeddedstar9ja@gmail.com

Thanks alot.. I'll be mailing you.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 9:13pm On May 02, 2015

arbitrage:
Will a 3.5kVA generator be able to power the complete machine on building site or you will rely on NEPA or rent bigger diesel generators?

A 3.5kva generator would be an extra margin. A 2.5kva generator is what i rate the 3D machine to use, with some saftety margin.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 8:38pm On May 02, 2015

Phinagold:
This is a good development but my concern is; wont the house built buy this machine collapse? Will the govt approve it? Cos people may not want to use their money to pay for their death traps.

I get your drift.. As in, won't the house built by this 3D machine be too weak; and collapse?.... Well well well. The answer is 'NO'. The same standard mixture of cement and sand would be ensured. So the structure would be strong and rigid. There won't be any strength difference between the two, the only difference would be more efficiency on the part of the 3D machine.
Don't let the technology especially the name; '3D house printer' impress you in an odd way..
The house built by this machine won't collapse because it isn't doing anything new here, it is doing just the old fashioned way of building a house, thats all. But in an enhanced manner. I should even be more worried that at the end of the day, the strength of the building would be to strong.
Offcourse the govt would approve it after a public structural test with hand built and 3D built house.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 2:54pm On May 02, 2015

AAinEqGuinea:
this thread

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 2:50pm On May 02, 2015

Here's another kind of stepper driver i shall be using. It is a microstepping driver. The model is ST-M5045.
Two of this driver will power the motor that will move the gantry along the axis of the rails. It is important to note here that, the weight on one side of the gantry will be pushing 1.5 ton (1,500kg) by the end of the build. Thats quite alot of weight when you come to think of the Nema 34 motor that will be driving it. But i am going to use a worm gear system to achieve the force needed to move 1.5 ton of weight.

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 11:16am On May 02, 2015

AAinEqGuinea:
not nearly as cool as the one being made here

Do you mean the houses being built by 3D house printers over there?

Business › Re: Sponsor me to build a 3D house printer,and we'll split profit 50%- 50% For Life. by Pakingzzz(op): 10:29am On May 02, 2015

I set out to look for the L section beam i would be needing to build the truss. I found the one in the pix below, although i didnt measure much the specs, but the thickness was okay. Albeit at a price of 3,500 naira per piece at a length of 12ft.
I will be needing these L beams as much as 100 pieces.

1 Like

Politics › Re: Maiduguri-abuja Trekker Now In Damaturu [photo] by Pakingzzz(m): 10:59pm On May 01, 2015

Celebrities › Re: Flavour An Chidinma On Stage Today by Pakingzzz(m): 10:54pm On May 01, 2015

Politics › Re: Enugu APC Chiefs Fight Over Ministerial Slot by Pakingzzz(m): 10:53pm On May 01, 2015

1 2 3 4 5 6 7 8 ... 22 23 24 25 26 27 28 29 30 (of 50 pages)