₦airaland Forum

micktoxin:
I am under no illusion that 1mill is not enough. .

I am aware my brother.. I understand that 1million wouldn't be enough for such project. But i wanted a way that i can build that 3D with 1million naira.. It would only mean streatching myself to the limits. But at the end, i will do it.

ewizard1:
Why not Fabricate them... ( Get the Blank L Beams and drill holes in them)

I live near an Iron Market here in Lagos.

I can help with the Procurement if you want.

Ok, thanks for the info..
Can you get the specs of the L beam for me? And also a snapshot of it?
I would need all the measurements you can squeeze out of them.

Closed

Please does anyone knows where i can buy in large quantities, the L shaped beams in the picture below, in Nigeria?
I want to buy them in large quantities.

Please does anyone knows where i can buy in large quantities, these L shaped beams that have holes in them in Nigeria?

micktoxin:
You need to show more to get the investment.

I was thinking showing more would mean, exposing the blueprint in the open?
Or don't you think so?

micktoxin:
Have you send me the email?.

Yes, i have.

naijacutee:
Ambitious projects like these interest me and I would like to help you get all that you need to make this a reality.

Am very grateful for that..

@ Temitope
email sent.

Uncracked Pkn still available.

Still on it.

Still on.

micktoxin:
Please check http://uk.farnell.com/ and http://uk.rs-online.com/web/ if you can find what you are looking for, so as to have a better idea about the pricing.

Nice site and product they've got. But i have some sites that stocks all the motors, drivers and microcontrollers i need at good prices.
I shall post them here.

emeka136:
success bro. i believe you.

Thanks for those words..

sped1oro:
i
will try and see if i can get you a registered limited liability company
for a start, it will increase ur chances of getting serious
investors.

I appreciate your efforts.

Tmonex:
Bro i think people will support you from all over the world if you can put this your proposal on indiegogo.com

i have tried before, it refused to accept my proposal

Angelstartups:
Hello,

Have you registered on www.angelstartups.com.ng? Send a mail to admin@angelstartups.com.ng.

Regards.

I've registered. Been trying to submit my proposal, but i can succeed. So i just gave it up.

akinvest:
I need pks 5000m/t monthly fob($) Ph or Calabar.
+2348139566458.

.

DrTeeee:
Try draw out a financial plan for this project which will cover all needed. .

I already have a financial plan for this project, it covers all that's needed to completely and succesfuly build the 3D house printer

DrTeeee:
Expecting your mail .Let's discuss.

Thanks for the update.. I'll be emailing you shortly

tafrica:
OP, I always have the urge to help but I'm still unemployed for now. Can I share this thread link with some people perhaps some may be interested to sponsor this?

Yea, you can.. And thanks for sharing in advance.

I am putting up all my gadgets for sale. These include tx, rx, servos, speed controllers, shafts, gears, swashplates, blades, blade holder, tail boom, micro bearings, gyros etc. Contact me if you are interested in any of them: 07015387845

The Project is closed for now, till further notice.

Reason; am on to projects that will earn me money not hobby projects that don't sell here in Nigeria.

I am putting up all my gadgets for sale. These include tx, rx, servos, speed controllers, shafts, gears, swashplates, blades, blade holder, tail boom, micro bearings, gyros etc. Contact me if you are interested in any of them: 08122423549

The Project is closed for now, till further notice.

Reason; am on to projects that will earn me money not hobby projects that don't sell here in Nigeria.

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

There has been talks concerning the time frame that would be spent in building the first 3D house printer prototype.
The drift is; the nine months i stipulated to be the time that would take to build the 3D printer might be seen as too long a time. This is because in every first prototype of a specific model of 3D printers, they will pass a rigorous scrutiny of numerous calibrations, because they are going to be the yard stick for subsequent mass production of the model.
So after this first prototype is built, it will only take two and half months to build one, if i were to be working with one assistant.
If i were to be working with two assistants, it will only take one and half months to build one 3D house printer.
Hope you now get the drift?

It is noteworthy to mention here that, the 3D house printer isn't restricted to non storey buildings. It can be made to build storey buildings. The gantry just have to be made longer and the feed system lengthend.
The possible limit the 3D house printer can go, is 4 storey buildings..

I got some inquiries as to what location would the project be best done. My answer to this is, no location that isn't good. It can be done anywhere in this country.

AAinEqGuinea:
looks like you're having much fun

What else can one do my brother.