₦airaland Forum

RESERVIOR SEISMIC – TO- SIMULATION TRAINING (PETREL) IN LAGOS.
Petrel is a software package, which is a product of Schlumberger that allows the user to build a reservoir model with properties to export to a simulator. Petrel is Windows based software for 3D visualization, 3D mapping and 3D reservoir modeling and simulation.
Our training and consulting company offer intensive application of Petrel in Seismic, Reservoir mapping, Well- logging, Fault and strati graphical modeling.

COURSE MODULE
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Fault Modeling(Geomodeling, Strutural modeling)
Gridding
Layering
Petro physical Modeling(Porosity, Facies, Permeability, water Saturation) using petrel application.
Volume Calculation
Target Audience: Geoscientist, Petroleum Engineers, Graduate, NYSC Members.

Contact: Ken Technologies on 08060360538, 08028553955.
Email: kengeotech@yahoo.com

Trainee Centre : 8, Omotayo Bello Street, Thomas Estate, Ajah, Lagos.
OR
26, Ikotun/Idimu Road, College Bustop, Ikotun, Lagos.

STRUCTURAL DESIGN & DETAILING
OF R.C BUILDINGS USING STAADPRO
(From Basic Principle)
This course will expose the attendees to the basic concepts in Structural design of reinforced concrete buildings in accordance to BS 8110. Participant will be expose through practical training
Design, detailing and analysis samples with reference to live projects.
Starting date: Mon. 5th Oct, 2015. Fee: #25,000 only
Time: Morning Session (10am- 2pm)
Evening Session (4pm-6pm)
Weekends Training available
Venue: 26, Ikotun Rd, Suit 15, Kazam Plaza, Beside
Diamond Bank, Ikotun, Lagos.
Outlet: 8, Omotayo Bello Close Thomas Estate, Ajah, Lagos.
REGISTER NOW:
Enquiries: Ken Tech: 08060360538/08028553955
Email: kengeotech@yahoo.com
Venues: 8, Omotayo Bello Street, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Idimu Road, By Diamond Bank, college Bstop, Ikotun, Lagos.

GENERAL TRAINING MODULES( OIL/GAS COURSES)

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends
Starting date: 7th October, 2015.

2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends

Starting date: Mon, 5th October, 2015.

3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
Starting date: Mon, 5th October, 2015
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks ( 3 times a week), or 3 Weeks ( Saturdays & Sundays)
Starting Date: 7th October, 2015.

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
Starting date: October, 2015( 4th Week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

Geoken Engineering Services
Geoken Engineering company was established in 2012 as a Geotechnical/
Engineering Services Company, Its operational bases span within two locations in
Lagos, Nigeria, Lagos, Island and Mainland.

SERVICES
• Ground water Drilling / Exploration
• Foundation, Pilling, and Structural Design (Piling test=PIT)
• Soil and Material investigation and testing (CPT, SPT, TRIAXIAL, SIEVE ANALYSIS)
• Pump and Aquifer testing
Geophysical Survey, Environ mental Studies
• Reservoir Characterization and Simulation
• GIS Analysis
• Hydro geological studies (Well Logging, Resistivity Logging & Water treatment)
Engineering, Pipe & Process design (Training and Consultancy) CADD, PDMS, HYSYS, PETREL, Geotechnical Software Application.

PIPELINE CONSTRUCTION
This Include : Construction of both underground and above ground cargo pipelines, Construction of tank farm piping, Construction of piping pigging system, Hot tapping of pipelines, Cathodic protection of pipelines, Construction of Pipes fittings, Equipment for oil and Gas platform.
GEOTECHNICAL SERVICES DIVISION: @ Geoken Engineering we stabilize engineering structures, such as private and industrial buildings, dams, jetty’s, highways, railways, road, etc.
GEOPHYSICAL/GEOLOGICAL/HYDROGEOLOGY SURVEY: Using our geophysical methods for groundwater exploration, delineation of salt/fresh water interface, search for solid mineral deposits, using well logging.
FOUNDATION/PILING WORKS: On sites , which soil are weak significant to depth, pile are structures which allow the construction of bridges, building, dams, jettys, to be design without failure and fracture. @ Geoken Engineering, we design, construct piles and carry out its testing.
PIPES, STEEL, RESERVIOR, TANKS (FABRICATION/DESIGN): We use state of the earth software to design and model Plant (Equipments, Pipes), also fabricate to
Customer specification.
We truly provide comprehensive construction services to our clients. From planning through post construction, we are committed to the project and the team.
Phone: +2348060360538, +2348028553955
Email: kengeotech@yahoo.com
Website: www.geokentech.com
OPERATING OFFICE
Address: 8, Omotayo Bello Street, Thomas Estate, Ajah, Lagos.

Branch: 26, Ikotun / Idimu Road, Suite 15, Kazam Plaza,
College, Bus top, Ikotun, Lagos.

GENERAL TRAINING MODULES( OIL/GAS COURSES)

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends
Starting date: 7th October, 2015.

2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends

Starting date: Mon, 5th October, 2015.

3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
Starting date: Mon, 5th October, 2015
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks ( 3 times a week), or 3 Weeks ( Saturdays & Sundays)
Starting Date: 7th October, 2015.

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
Starting date: October, 2015( 4th Week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

GEOTECHNICAL INVESTIGATION TRAINING
Geoken Engineering services, is a involve in geotechnical study, Drilling, material and soil
Investigation, Piling and Foundation Engineering. We undergo training for participant seeking
An in-depth knowledge in the following Geotechnical/Geophysical areas:
1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case
Study. A. Sieve Analysis
B. CPT (Cone penetration Test), SPT (Standard penetration test)
C. Triaxial testing
D. Bearing Capacity Test.
2. Foundation Engineering: A. Pile integration test
B. Pile load test
3. Geophysical/ Reservoir Analysis: (Petrel software application) for reservoir characterization and Estimation.
GEOTECHNICAL SOIL INVESTIGATION (CPT/SPT, PILE TESTING, SURFACE DRILLING TECHNOLOGY).

WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students,
Geotechnical survey Engineers, Engineers, Hydrographers, Surveyors
Email: kengeotech@yahoo.com
www.geokentech.com
08060360538, 08028553955
Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza,
College Bustop, Ikotun, Lagos.
Or, 8, Omotayo Bello Street, Thomas,Ajah, Lagos.

STRUCTURAL DESIGN & DETAILING
OF R.C BUILDINGS USING STAADPRO
(From Basic Principle)
This course will expose the attendees to the basic concepts in Structural design of reinforced concrete buildings in accordance to BS 8110. Participant will be expose through practical training
Design, detailing and analysis samples with reference to live projects.
Date: Mon. 28th (Sep)- Fri. 3rd Oct, 2015 Fee: #25,000 only
Time: Morning Session (10am- 2pm)
Evening Session (4pm-6pm)
Venue: 26, Ikotun Rd, Suit 15, Kazam Plaza, Beside
Diamond Bank, Ikotun, Lagos.
Outlet: 8, Omotayo Bello Close Thomas Estate, Ajah, Lagos.

REGISTER NOW:
Enquiries:
Ken Tech: 08060360538/08028553955
Email: kengeotech@yahoo.com

MARKETERS NEEDED URGENTLY
An Engineering company located in Lagos is in need of marketers. Such candidates most posses the following skills:
1. Interpersonal skills
2. Creativity and imagination
3. Team work
4. Drive and ambition
5. Good oral and written communication skills.
Interested person should base within the following areas in Lagos ( Ajah, Lekki, Ikotun, Egbeda, Cele xpress).
Forward CV and Application letter to kengeotech@yahoo.com
NB. The position is very urgent.

SEMINAR/WORKSHOP ON AUTOCAD, P&ID, PDMS, HYSYS

1. Principles of Basic Design and Drafting ( AUTOCAD 2D/3D)=
Seminar Date: Saturday, 12th September, 2015.
Time: 10.00am
Location: Lagos (Ikotun, Centre: 26, Ikotun Road, By Diamond Bank,
College, Bus top, Suite 15, Kazam plaza.
Ajah centre (8, Omotayo Bello Street, Thomas Estate, Ajah
Lagos).
Seminar Fee: # 5,000
2. Fundamentals of Oil and Gas Piping Facilities ( Basic Piping) PDMS, CAD 3D PLANT
Seminar Date: Saturday, 12th September, 2015
Time: 10.00am
Location: same as above
Seminar fee: #5,000
3. Principles of Piping and Instrumentation drawing (P&ID).
Seminar Date: Saturday, 17th September, 2015.
Location: Same as 1 above.
Seminar fee: #5,000

4. Principles of Process flow simulation (HYSYS)
Seminar Date: Saturday, 17th September, 2015.
Location: Same as 1 above.
Seminar fee: #5,000

Venue: 8, Omotayo Bello Street, Thomas Estate,
Ajah, Lagos.
Outlet: 26, Ikotun Road, suite 15, Kazam Plaza
College Bustop, Ikotun, Lagos.

NB: For more information call Ken Technologies (08060360538, 08028553955)
Email: kengeotech@yahoo.com
www.geokentech.com/training

STRUCTURAL DESIGN TRAINING USING STAADPRO
TRAINING MODULE MODULE DESCRIPTION
This course serves as a basic to intermediate level application of STAADPRO software for structural design of various types of structures. Participants are expected to have good grasp of structural design engineering principles.
Each participant provided a dedicated pc with the necessary software loaded and the training course will be an interactive sessions. The participants will also be given the opportunity to develop at least one project – specific deliverable during the training programme.
Course Content
MODULE 1: INTRODUCTION TO STAAD FOR STRUCTURES AND ANALYSIS AND DESIGN
• General Description
• Types Of Structure; Trusses , Frames, Shell etc
• Units
• Structures geometry and coordinate system
1. Global coordinate system
2. Local coordinate system
3. Relationship between global and local coordinate systems
• Member properties
• Member releases
• Basic support or boundary conditions
• Basic load definition and load generations
• Design capabilities
MODULE 2: MODEL GENERATION AND ANALYSIS OF SIMPLE STRUCTURES
• Setup ; templates or user-defined
• Geometry
1. Model generation using templates
2. Model Generation Using Member Incidences for Beams, Plates & Surfaces
3. Model Generation using Import from DFX file.
4. Model Modifications: Add, Remove, Move, Divide, Selection , Mesh Generations etc.Mirror, Delete etc. of Beam, Plates And Surfaces
• Member Properties: Material, Releases, Offsets Compression & Tension etc.
• Support; Foundation, Fixed, Pinned, Free, Enforced Spring etc.
• Loading ; Dead , Live, Wind And Combinations
• Analysis Options: Linear Static Analysis
• Design options
• Case Study 1- Modeling & Analysis of a Simple Structure
MODULE 3: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 2 : Structural Steel And Design for a 9m overhead water tank
• Interpretation of Result and Reporting
MODULE 4: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 3: Reinforced Concrete Building Design : Three Storey Building
• Interpretation of Results and Reporting
MODULE 5: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 2: Structural Steel Analysis And Design for a 9m overhead water tank
• Case Study 3: Reinforced Concrete Building Design : Three Storey Building
MODULE 6: ADDITIONAL INFORMATION
• Q& A
• STAAD add –on modules
• Further analysis
Target Audience
Fresh Graduates and Design Engineers Involved In Structural Engineering Design, Civil Engineers
Call: Ken Technologies (08060360538, 08028553955)
kengeotech@yahoo.com

SEMINAR/WORKSHOP ON AUTOCAD, P&ID, PDMS, HYSYS

1. Principles of Basic Design and Drafting ( AUTOCAD 2D/3D)=
Seminar Date: Saturday, 5th September, 2015.
Time: 10.00am
Location: Lagos (Ikotun, Centre: 26, Ikotun Road, By Diamond Bank,
College, Bus top, Suite 15, Kazam plaza.
Ajah centre (8, Omotayo Bello Street, Thomas Estate, Ajah
Lagos).
Seminar Fee: # 5,000
2. Fundamentals of Oil and Gas Piping Facilities ( Basic Piping) PDMS, CAD 3D PLANT
Seminar Date: Saturday, 12th September, 2015
Time: 10.00am
Location: same as above
Seminar fee: #5,000
3. Principles of Piping and Instrumentation drawing (P&ID).
Seminar Date: Saturday, 5th September, 2015.
Location: Same as 1 above.
Seminar fee: #5,000

4. Principles of Process flow simulation (HYSYS)
Seminar Date: Saturday, 19th September, 2015.
Location: Same as 1 above.
Seminar fee: #5,000

Venue: 8, Omotayo Bello Street, Thomas Estate,
Ajah, Lagos.
Outlet: 26, Ikotun Road, suite 15, Kazam Plaza
College Bustop, Ikotun, Lagos.

NB: For more information call Ken Technologies (08060360538, 08028553955)
Email: kengeotech@yahoo.com
www.geokentech.com/training

GENERAL TRAINING MODULES( OIL/GAS COURSES)

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends
Starting date: September, 16th 2015.

2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends.
Starting date: September, 14th 2015.

3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
Starting date: September, 9th 2015.
4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
Starting date: October, 2015.

5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request

6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks

Starting date: On Request

SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.

Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

ENGINEERING DESIGN COURSES TRAINING FOR GRADUATE ENGINEER
PROCESS PIPING DESIGN, DRAFTING AND ENGINEERING
KEN TECHNOLOGIES: Offers this course with emphasis on practical of experts systems. This course
Is taught as per ASME 3.1 codes.
• Piping Fundamentals
• ASME Codes and Standards
• Pipe Fittings
• Flanges and Valves
• Mechanical/ Process Equipment
• Flow Diagram Design / Interpretation
• Piping Equipment Layout
• Piping Isometrics
• Piping Spools and Supports
• Software Application and Training

AUTOCAD (2D/3D)
AutoCAD is a software application for computer aided design (CAD) and drafting. The software
Supports both 2D and 3D formats. AutoCAD still remains standard software owing to it flexibility in usage. Widely employed in Building, Mechanical, Electrical drawings and design. Ken Technologies provide intensive on 2D and 3D modeling ranging from Building, Mechanical modeling and piping design.

• PLANT DESIGN MANAGEMENT SYSTEM (PDMS)& PIPING AND INSTRUMENTATION DIAGRAM (P&ID).
• PDMS is a customizable, multi-user and multi-discipline, engineer controlled design software package for engineering, design and construction projects in offshore and onshore, oil and gas industry, chemical and process plants, mining, Pharmaceutical and food industry, power generation. Ken Technologies training approach sets to equip trainee industry engineer on how to use PDMS to tackle industry related problems especially in the oil and gas sector.
HYSYS
Hysys is widely used software in process, chemical, pharmaceutical, and oil and gas industries.
Hysys serves as the engineering platform for modeling process and cryogenic facilities, to
Refining and chemical processes. Ken Technologies carry out professional Hysys training as
Required by industrial application emphasizing on its unique simulation tools.

CAESER 11
Caeser 11 is the market- leading stress analysis software. It is used to analyze piping systems of
All sizes and complexities. It is applicable for newer designs and trouble- shooting of existing
Pipes.
Ken Technologies helps Engineer trainee to explore this powerful software.
: 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, BY DOREN HOSPITAL
AJAH, LAGOS.
Outlet: 26, Ikotun Road, College Bustop, By Diamond Bank
Ikotun, Lagos.
kengeotech@yahoo.com

08060360538, 08028553955

GEOKEN ENGINEERING SERVICES

Drilling, Geophysical /Geotechnical Services


26, Ikotun/ Idimu Roa, Suite 15,
kasam Plaza, Beside Diamond Bank Ikotun Lagos
Tel: 08028553555, 08060360538
Email: kento2002ng@yahoo.com

COMPANY PROFILE:

Geoken Engineering Service is a company equipped with state of the art facilities. Our experience and commitment over the years to project has always been our strength while maintaining client’s precision and satisfaction.
The services offered by us include:
Geotechnical Investigation Services (Geotechnical Investigation by core drilling)
Environmental Geophysics- Hydrocarbon pollution of hydrogen water
Environmental impact assessment projects.
Overburden thickness in a dump site and related matters
ENGINEERING GEOPHYSICS:
We complement civil engineers and architecture in order to deliver better services in any form of construction works by cordially initial investigation on site to determine soil substance. Our area of specialty includes:
Material test for road
Piezometers survey
Detection of buried objects.

EXPLORATION GEOPHYSICS:
From the believe that water is a scarce commodity that jealously guided
. The whole earth is covered with water only 25% is available for drinking. We undertake several forms of investigation to determine water for life. Our areas of interest in geophysical Exploration include:
1. Ground water investigation
2. Pollution of soil and ground water
3. Ground water flow.
BOREHOLE DRILLING/ LOGGING:
Borehole of various dimensions ranging from domestic and industrial are our specialty. Carrying out well completion and development is also our area of interest.

In any case of uncertainty in the production of well, we log our well to determine the status of the well, to determine its yield before casing. We equally offer these services to other company that need this services.

Water Distribution: we create network of mutuality of pipeline to read and distribute water to designated target by using the service of our renowned plumber

Overhead tanks construction: we design overhead tanks of various specification and capacity to take of our perspective clients

CLIENTELE:
Our expertise in successfully handling demands of Geotechnical Investigation and Core Drilling Services has assisted us in gaining support from many quality conscious clients. Furthermore, the compressively priced services as well as capability to deliver end results as per the requirement of our clients has also helped us in as a leading player in our industry sector.