₦airaland Forum

Seismic & well logging ( Formation Evaluation) training still on contact Geoken Tech. 08060360538.

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:

COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
Introduction to AutoCAD 2d Toolbar
Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
Setting AutoCAD drawing Limits
Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
Introduction to Isometric drawing
Drawing, dimensioning and editing Isometric drawing
Introduction to AUTOCAD 3D
AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
Creating solid object with AutoCAD 3d tools
Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN






FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.


FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
·Introduction to Plant Equipments type
·Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
·Taking coordinate/Equipments position from plant plan drawing (GAD)
·Using the Primitive method to design Equipments
·Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
·Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
·Piping Setting
·Pipe specification in PDMS
·Pipe Routing (Linking equipments with pipes)
·Modifying the Head/Tail of a Pipe
·Supporting Plant with Structures (Beams, Columns, Slab)


FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
·Introduction to Aspen Hysys
·Hysys working Environment
·Adding component to workflow
·Adding Fluid package
·Entering Hysys Simulation Environment
·Adding material and Energy stream
·Building Simulation
·Analyze the Property Using case Study
·Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
·Equilibrium Reaction
·Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
Introduction to P&ID workspace
P&ID Tools Palette
Creating a New P&ID Project
Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
Connecting Equipments together with Process line
Assigning Tags to Equipments and Specification to process lines
Placing control instruments to process lines, Equipments and on control valves
Checking for Errors by running validation



FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

Training Manuals & Certificate of Completion will be issue



TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

Hi, Aspen Hysys full version is available. 3k for Lagos residence, 5k for outside Lagos residence because of shipment fee, Thanks.

Seismic Interpretation & Well Logging Training Using Petrel

Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL

Venue: 8, Omotayo Bello Close, Thomas Estate –Ajah, Lagos State.
OR
26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza.

COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs
Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using checkshot data.
•Calculation of petrophysical parameters
•Generation of various attributes maps
•Identification of prospects.




Time: 10am-2pm daily

NB: The softwares shall be installed during the training for all participants.

Cost: #40,000

For registration and enquiry contact
08060360538
Wassap ( 08060360538)

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:
COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
• Introduction to AutoCAD 2d Toolbar
• Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
• Setting AutoCAD drawing Limits
• Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
• Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
• Introduction to Isometric drawing
• Drawing, dimensioning and editing Isometric drawing
• Introduction to AUTOCAD 3D
• AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
• Creating solid object with AutoCAD 3d tools
• Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
• Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN






FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.


FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
•Introduction to Plant Equipments type
•Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
•Taking coordinate/Equipments position from plant plan drawing (GAD)
•Using the Primitive method to design Equipments
•Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
•Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
•Piping Setting
•Pipe specification in PDMS
•Pipe Routing (Linking equipments with pipes)
•Modifying the Head/Tail of a Pipe
•Supporting Plant with Structures (Beams, Columns, Slab)


FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
•Introduction to Aspen Hysys
•Hysys working Environment
•Adding component to workflow
•Adding Fluid package
•Entering Hysys Simulation Environment
•Adding material and Energy stream
•Building Simulation
•Analyze the Property Using case Study
•Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
•Equilibrium Reaction
•Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
• Introduction to P&ID workspace
• P&ID Tools Palette
• Creating a New P&ID Project
• Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
• Connecting Equipments together with Process line
• Assigning Tags to Equipments and Specification to process lines
• Placing control instruments to process lines, Equipments and on control valves
• Checking for Errors by running validation



FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

• Training Manuals & Certificate of Completion will be issue


TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

VACANCY: VACANCY:: VACANCY:: OND/BSC IT STUDENT)
Geoken Tech: is seeking the service of an interested Industrial attachment student to undergo his/her IT in our company.
Qualification: Engineering/Geology/Geophysics Background
2. Most posses a functioning Laptop
3. Residing within Ikotun/Cele Egbe, Egbeda and its Environs
Interested student should forward application and indicating course of study to kengeotech@yahoo.com or call 08060360538
Resumption date: As soon as Possible

COURSE MODULE FOR GEOTECHNICAL/GEOPHYSICAL TRAINING
1. Objective of site geotechnical site investigation
2. Reconnaissance
3. Preliminary Investigation
4. Detail (In-situ Investigation)
5. Application of Geotechnical site investigation methods (DCPT, SPT, MOISTURE CONTENT, SHEAR STRESS TEST, PERMEABILITY TEST).
6. Geophysical borehole survey- Resistivity (VES)---Software application( WinRESIST, IPin2win)
7. On Field exposure.
8. In-situ Result analysis/Interpretation
9. Geotechnical software application.
10. PIT Testing procedures & Result interpretation.

Who should Attend: Geologist/Geotechnical, Civil Engineers.
Contact: Geoken Tech Services Nig Ltd
kengeotech@yahoo.com
08060360538/08028553955
Address: 26, Ikotun/Idimu Road, Opposite Domino Pizza
Ikotun, Lagos

Sorry! 08060360538

Call! Geoken Tech: 08060369538. Date is getting closer

Enrol for AutoCAD, PDMS, HYSYS & PETREL training @ Geoken Tech.
Contact: 08060360538.
. kengeotech@yahoo.com
Target Audience:mechanical, Petroleum, Electrical, Chemical/ Process Engineers, Geologist.
Book for training now!!!

For oil/gas & Engineering Design software training ( AutoCAD, PDMS, HYSYS, PETREL) contact Geoken Tech: 08060360538. kengeotech@yahoo.com
Target Audience: Nysc Members, Jobseekers, Graduate Engineers.

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:
COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
• Introduction to AutoCAD 2d Toolbar
• Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
• Setting AutoCAD drawing Limits
• Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
• Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
• Introduction to Isometric drawing
• Drawing, dimensioning and editing Isometric drawing
• Introduction to AUTOCAD 3D
• AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
• Creating solid object with AutoCAD 3d tools
• Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
• Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN






FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.


FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
•Introduction to Plant Equipments type
•Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
•Taking coordinate/Equipments position from plant plan drawing (GAD)
•Using the Primitive method to design Equipments
•Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
•Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
•Piping Setting
•Pipe specification in PDMS
•Pipe Routing (Linking equipments with pipes)
•Modifying the Head/Tail of a Pipe
•Supporting Plant with Structures (Beams, Columns, Slab)


FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
•Introduction to Aspen Hysys
•Hysys working Environment
•Adding component to workflow
•Adding Fluid package
•Entering Hysys Simulation Environment
•Adding material and Energy stream
•Building Simulation
•Analyze the Property Using case Study
•Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
•Equilibrium Reaction
•Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
• Introduction to P&ID workspace
• P&ID Tools Palette
• Creating a New P&ID Project
• Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
• Connecting Equipments together with Process line
• Assigning Tags to Equipments and Specification to process lines
• Placing control instruments to process lines, Equipments and on control valves
• Checking for Errors by running validation



FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

• Training Manuals & Certificate of Completion will be issue

Training Calender:
AUTOCAD & PDMS: ( 15TH - 29TH MAY, 2017)
ASPEN HYSYS & P&ID ( 18TH – 25TH MAY, 2017)
PETREL ( SEISMIC & WELL LOGGING) ( 20TH – 5TH JUNE 2017)

TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

GEOKENTECH SERVICES NIG LIMITED

(Geotechnics, Borehole drilling, Geophysical Survey Piling, & Design)



CONTENTS:
1. INTRODUCTION
2. BUSINESS INTEREST
3. PROFESSIONAL EXPERIENCE
4. PAST PROJECTS IN PICTURE

GENERAL INTRODUCTION:
GeokenTech Engineering Services started operation in the year 2013 .
Office Address: 8, Omotayo Close, Thomas Estate, Ajah - Lagos
Branch Office: 26, Ikotun Road, (Suit 15, Kazam Plaza) College Bustop,
By Diamond Bank, Ikotun-Lagos.
Office Tel: +2348060360538, +2348028553955
Email: kengeotech@yahoo.com
Website: www.geokentech.com
Our company is involved into Geophysical/Geotechnical services:
1. ENGINEERING SUBSOIL INVESTIGATION
These are fundamental importance for the continued stability of engineering structures such as private or industrial building, roads, highways, bridges, jetty and dams etc.
2. GEOPHYSICAL/GEOLOGICAL INVESTIGATION

Using our geophysical sounding technique and other methods, we undertake investigation to reveal ground water accumulation, delineation of salt/fresh water interface, delineation of strata, and search for mineral resources of an area including well logging. We also carry out above water studies for dredging and other related purpose.


3. FOUNDATION ENGINEERING
On sites, which have very weak soils to significant depth, piles are the engineering
Devices, which allow the construction of building, offshore towers, bridges and roads
to be made without fear of failure

3B: Pile Integrity Testing
To ascertain the structural integrity of Piles i.e. the depth of termination of piles,
Homogeneity and the symmetry of the installed piles, we carry out pile integrity
Testing with the latest PIT equipment and run through available software

3C: Pile Load Test
The most effective method of determine the pile load capacity and settlement of
Either driven or bored pile is by a pile load test.


4. DRILLING OF BOREHOLES
We undertake the drilling and completion of water boreholes for interested persons and organization consequent however upon proof that there is a dependable ground water aquifer in a client's site. We have been in the drilling and geophysical survey business for over ten years and our track records are indispensable. We have experts in well design, borehole wall development, flushing and well completion.

5. WATER & WASTE TREATMENT PLANT
We are interested in the above and carry this out based on the size of a client's need.

6. CONSTRUCTION OF GROUND & OVER HEAD TANK AND RESERVOIR
We also undertake the above usually based on the client's need and demand, using steel or concrete for the construction. We have experts who can also give advisory supports in the construction of reservoirs, whether for oil or water storage.

7. DETAIL ENGINEERING DESIGN OF PROCESS PLANT WITH CADD, PDMS
Our design Engineers use engineering software’s ( AutoCAD, PDMS) for plant design and modeling, storage tank and scaffolding design.



MISSION STATEMENT:
To be one of the leading geotechnics and foundation engineering company by
Providing effective solution to all geotechnical problems. We hope to achieve this with excellence in our professional operation, superior financial performance, promoting highest ethical standard that guarantee quality that will satisfy our clients.

OVERVIEWED OF WORKS EXECUTED AND SUPERVISED BY GEOKENTECH
1. Client---- CMO, Catholic Church, Ago-Palace Way, Okota, Lagos
Depth: Borehole Test (SPT) ----30 metres
Description: Soil investigation study
Year: 2016


2. Client--- Kings College, Victoria Island
Depth: Borehole drilling ---- 200 metres (deep well)
Description: To delineate Fresh/Salt water intrusion
Year: 2015

3. Sub surface investigation study at Abraham Adesanya, Ajah- Lagos
Depth: Borehole test (SPT) -----30 metres

4. Geophysical Survey ( Resistivity) to determine Aquifer overburden thickness at Lekki- Ajah

Year: 2015

5. Pile Integrity Test (P.I.T)
P.I.T on 15nos. piles for proposed development at Apapa Oshodi Express Way,Lagos



LIST OF EQUIPMENTS


1. ABEM TERRAMETER SAS 300C
2. COMPRESSOR
3. PIPES LENGTH

GEOTECHNICS/FOUNDATION

1. .2.5Tons Capacity Penetrometer Machine
2. Hand Rig

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:
COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
• Introduction to AutoCAD 2d Toolbar
• Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
• Setting AutoCAD drawing Limits
• Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
• Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
• Introduction to Isometric drawing
• Drawing, dimensioning and editing Isometric drawing
• Introduction to AUTOCAD 3D
• AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
• Creating solid object with AutoCAD 3d tools
• Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
• Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN






FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.


FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
•Introduction to Plant Equipments type
•Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
•Taking coordinate/Equipments position from plant plan drawing (GAD)
•Using the Primitive method to design Equipments
•Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
•Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
•Piping Setting
•Pipe specification in PDMS
•Pipe Routing (Linking equipments with pipes)
•Modifying the Head/Tail of a Pipe
•Supporting Plant with Structures (Beams, Columns, Slab)


FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
•Introduction to Aspen Hysys
•Hysys working Environment
•Adding component to workflow
•Adding Fluid package
•Entering Hysys Simulation Environment
•Adding material and Energy stream
•Building Simulation
•Analyze the Property Using case Study
•Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
•Equilibrium Reaction
•Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
• Introduction to P&ID workspace
• P&ID Tools Palette
• Creating a New P&ID Project
• Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
• Connecting Equipments together with Process line
• Assigning Tags to Equipments and Specification to process lines
• Placing control instruments to process lines, Equipments and on control valves
• Checking for Errors by running validation



FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

• Training Manuals & Certificate of Completion will be issue

Training Calender:
AUTOCAD & PDMS: ( 15TH - 29TH MAY, 2017)
ASPEN HYSYS & P&ID ( 18TH – 25TH MAY, 2017)
PETREL ( SEISMIC & WELL LOGGING) ( 20TH – 5TH JUNE 2017)

TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:
COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
• Introduction to AutoCAD 2d Toolbar
• Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
• Setting AutoCAD drawing Limits
• Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
• Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
• Introduction to Isometric drawing
• Drawing, dimensioning and editing Isometric drawing
• Introduction to AUTOCAD 3D
• AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
• Creating solid object with AutoCAD 3d tools
• Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
• Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN






FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.


FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
•Introduction to Plant Equipments type
•Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
•Taking coordinate/Equipments position from plant plan drawing (GAD)
•Using the Primitive method to design Equipments
•Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
•Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
•Piping Setting
•Pipe specification in PDMS
•Pipe Routing (Linking equipments with pipes)
•Modifying the Head/Tail of a Pipe
•Supporting Plant with Structures (Beams, Columns, Slab)


FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
•Introduction to Aspen Hysys
•Hysys working Environment
•Adding component to workflow
•Adding Fluid package
•Entering Hysys Simulation Environment
•Adding material and Energy stream
•Building Simulation
•Analyze the Property Using case Study
•Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
•Equilibrium Reaction
•Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
• Introduction to P&ID workspace
• P&ID Tools Palette
• Creating a New P&ID Project
• Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
• Connecting Equipments together with Process line
• Assigning Tags to Equipments and Specification to process lines
• Placing control instruments to process lines, Equipments and on control valves
• Checking for Errors by running validation



FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

• Training Manuals & Certificate of Completion will be issue

Training Calender:
AUTOCAD & PDMS: ( 15TH - 29TH MAY, 2017)
ASPEN HYSYS & P&ID ( 18TH – 25TH MAY, 2017)
PETREL ( SEISMIC & WELL LOGGING) ( 20TH – 5TH JUNE 2017)

TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

TRAINING ON HYDRO GEOLOGY/GROUND WATER & RESISTIVITY SURVEY,
SEISMIC & WELL LOGGING
Geoken Tech Services: an incorporated company into Consulting and training is
Organizing a comprehensive training in the following areas:
1. Hydro Geology--------Aquifer test (Pumping test)
2. Aquaecheon ( Water quality)
3. Geophysical/Resistivity Survey( VES Application for ground water, Soil Investigation)
4. Geophysical software’s Application-----Win Resist, Zondip 10, IPIN 2WIN)
5. Hydrologic Modeling ( hydro comp)
6. Petrel ( Seismic & Well Logging of Reservoir)
This training will involve data Processing, Interpretation and problems solving

To book for training Contact: Geoken Tech (08060360538, 08028553955)
Email: kengeotech@yahoo.com
Training Centre: 26, Ikotun Road, College Bus top (Suit 15, Kazam Plaza)
8, Omotayo Bello Close, Thomas Estate, Ajah- Lagos (Lekki-Epe
Express way)
TARGET AUDIENCE: GEOLOGIST, GEOPHYSISCIST (GRADUATES, UNDERGRADUATES, NYSC, WATER ENGINEERS, CIVIL, IT STUDENTS, PETROLEUM ENGINEERS, JOBSEEKERS)

Seismic Interpretation & Well Logging Training Using Petrel

Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL

Venue: 8, Omotayo Bello Close, Thomas Estate –Ajah, Lagos State.
OR
26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza.

COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs
Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using checkshot data.
•Calculation of petrophysical parameters
•Generation of various attributes maps
•Identification of prospects.




Time: 10am-2pm daily

NB: The softwares shall be installed during the training for all participants.

Cost: #40,000

For registration and enquiry contact
08060360538
Wassap ( 08060360538)

OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS
Geoken Tech is offering training on the following oil and software application:
1. AUTOCAD (2D/3D)
2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)& P&ID
3. HYSYS(PROCESS DESIGN & OPTIMIZATION)
4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING
5. PIPING AND INSTRUMENTATION DESIGN (P&ID)
6. STAADPRO( STRCUTURAL DESIGN & RC BUILDING
N.B: Software’s/EBooks’ will be given to participant.
Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist.

CONTACT: (08060360538, 09084881939)
Email:kengeotech@yahoo.com
www.geokentech.com/training
VENUE:8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos.
Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos)

Participant should send names, Phone nos, & course of interest to the above
Numbers& Email

OIL & GAS TRAINING COURSES IN AJAH/LEKKI(JAN,2017) GeokenTech is offering intensive training on the following oil/gas software application
A. AUTOCAD(2D/3D)
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting-------
• Training Fee: #35,000---------------------- 6 Classes( Weekends available)
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers
Training Fee: #40,000------------------------------ 7 Classes (Weekends available)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process Engineer, Chemical, Instrumentation Engineers, Jobseekers

Training Fee: #30,000 ----------------------------5 classes (Weekends Available)

•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers

Training Fee: #20,000

F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION)
Modules:
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into Petrel
Seismic-well Ties (Synthetic Seismogram)
Importing well datas( Well heads, well logs, well deviation, well log correlation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir

Analyst, and other professionals
Training Fee: # 40,000---------------------------------5 classes




Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
By Doren Hospital, Through Abraham Adesanya
Rd.
IKOTUN CENTRE: 26, IKOTUN RD, COLLEGE BSTOP, BY DIAMOND BNK
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.

Seismic Interpretation & Well Logging Training Using Petrel

Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL

Venue: 8, Omotayo Bello Close, Thomas Estate –Ajah, Lagos State.
OR
26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza.

COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface


•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs
Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using checkshot data.
•Calculation of petrophysical parameters
•Generation of various attributes maps
•Identification of prospects.




Time: 10am-2pm daily

NB: The softwares shall be installed during the training for all participants.

Cost: #40,000

For registration and enquiry contact
08060360538
Wassap ( 08060360538)

OIL & GAS TRAINING COURSES IN AJAH/LEKKI(JAN,2017) GeokenTech is offering intensive training on the following oil/gas software application
A. AUTOCAD(2D/3D)
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting-------
• Training Fee: #35,000---------------------- 6 Classes( Weekends available)
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers
Training Fee: #40,000------------------------------ 7 Classes (Weekends available)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process Engineer, Chemical, Instrumentation Engineers, Jobseekers

Training Fee: #30,000 ----------------------------5 classes (Weekends Available)

•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers

Training Fee: #20,000

F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION)
Modules:
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into Petrel
Seismic-well Ties (Synthetic Seismogram)
Importing well datas( Well heads, well logs, well deviation, well log correlation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir

Analyst, and other professionals
Training Fee: # 40,000---------------------------------5 classes




Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
By Doren Hospital, Through Abraham Adesanya
Rd.
IKOTUN CENTRE: 26, IKOTUN RD, COLLEGE BSTOP, BY DIAMOND BNK
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.

VACANCY: VACANCY:: VACANCY:: OND/BSC IT STUDENT)
Geoken is seeeking the service of an interested Industrial attachment student to undergo his/her IT in our company.
Qualification: Engineering/Geology/Geophysic Background
2. Most posses a functioning Laptop
3. Residing withing Ikotun/Cele Egbe, Egbeda and its Environs
Interested student should forward application and indicating course of study to kengeotech@yahoo.com or call 08060360538

Vacancy for IT( Industrial attachment) Student in the field of Engineering/Geologist @ Geoken Engineering Services.
Qualification: OND/ BSc in any of the following course
1. Geology/ Geophysict
2. Mechanical/ Civil Engineering
Interested person should forward CV to kengeotech@yahoo.com
08060360538
He/she should be residing within Ikotun, Ejigbo, Egbeda.

Call 08060360538 to book for training

OIL & GAS TRAINING COURSES IN AJAH/LEKKI(JAN,2017) GeokenTech is offering intensive training on the following oil/gas software application
A. AUTOCAD(2D/3D)
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting-------
• Training Fee: #35,000---------------------- 6 Classes( Weekends available)
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers
Training Fee: #40,000------------------------------ 7 Classes (Weekends available)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process Engineer, Chemical, Instrumentation Engineers, Jobseekers

Training Fee: #30,000 ----------------------------5 classes (Weekends Available)

•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers

Training Fee: #20,000

F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION)
Modules:
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into Petrel
Seismic-well Ties (Synthetic Seismogram)
Importing well datas( Well heads, well logs, well deviation, well log correlation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir

Analyst, and other professionals
Training Fee: # 40,000---------------------------------5 classes




Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
By Doren Hospital, Through Abraham Adesanya
Rd.
IKOTUN CENTRE: 26, IKOTUN RD, COLLEGE BSTOP, BY DIAMOND BNK
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.