₦airaland Forum

TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE,
APRIL 2016)
A. AUTOCAD
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016)
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling ( Application of PDMS software in modeling beams, collums, plate & Panels)
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers
Training date: 13th – 22nd (April, 2016)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers

Training Date: 18th – 25th (April, 2016)


•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers
Training date 18th -22nd (April, 2016)
F. BENTLEY AUTOPLANT (CAD 3DPLANT)
• Introduction to AutoCAD 3D Plant
• Create and configure a project
• Create and modify a 3D Plant modeling
• Pipes, Equipment and Structural modeling and modification
• Migrate project and drawing
Target Audience: Design/Piping Engineers

G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION)
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Importing well datas( Well heads, well logs, well deviation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir
Training Date: 25th – 29th (April, 2016)
Analyst, and other professionals

H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING
Available on Request:



Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza,
Ikotun, Lagos.
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.

1. FREE DESIGN & PROCESS PIPING SEMINAR
Geoken Tech is offering free training in the application of Oil and gas software
In the following areas:
Engineering design/Drafting (CADD)
Piping & Equipment design (PDMS)
Process Piping & Instrumentation control (P&ID)


MODULES
• EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger)
•
• PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\
• ISOMETRIC PIPING GENERATING
• Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout.

• Benefits:
• At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally.

• How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc).

• Target Audience
• All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers.

N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s.

• For seat reservation:
• Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com
Location : LAGOS::::;
• Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun.
Attendance is by invitation/limited spaces available.
Date: Saturday 9th April, 2016.
Payment must be made before/day of Seminar/Workshop
•
•
•

TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE,
APRIL 2016)
A. AUTOCAD
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016)
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers
Training date: 13th – 22nd (April, 2016)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers

Training Date: 18th – 25th (April, 2016)


•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers
Training date 18th -22nd (April, 2016)
F. BENTLEY AUTOPLANT (CAD 3DPLANT)
• Introduction to AutoCAD 3D Plant
• Create and configure a project
• Create and modify a 3D Plant modeling
• Pipes, Equipment and Structural modeling and modification
• Migrate project and drawing
Target Audience: Design/Piping Engineers

G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION)
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Importing well datas( Well heads, well logs, well deviation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir
Training Date: 25th – 29th (April, 2016)
Analyst, and other professionals

H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING
Available on Request:



Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza,
Ikotun, Lagos.
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.

MICROSOFT PROJECT TRAINING
GeokenTech, a training/consulting firm based in Lagos, welcome you to the April/May 2016 edition of PMP (Project Management Professional training program me).
Ms. Project is a project Management software used to manage projects:
COURSE MODULE
• Introduction to MS Project
• Planning a Project
• Create a Project
• Create calendar-Project working time
• Project Scheduling
• Create and assign resources
• Execute and track project progress
• Project reporting
• Importing/Exporting of project

Training Package: * PMI accredited training manual
PMI Handbook
Certificate of training

Call GeokenTech ( 08060360538, 08028553955) kengeotech@yahoo.com

Training Fee: #30,000
Training Centre: 26, Ikotun Idimu Road, College Bustop, Ikotun- Lagos.

1. FREE DESIGN & PROCESS PIPING SEMINAR
Geoken Tech is offering free training in the application of Oil and gas software
In the following areas:
Engineering design/Drafting (CADD)
Piping & Equipment design (PDMS)
Process Piping & Instrumentation control (P&ID)


MODULES
• EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger)
•
• PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\
• ISOMETRIC PIPING GENERATING
• Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout.

• Benefits:
• At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally.

• How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc).

• Target Audience
• All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers.

N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s.

• For seat reservation:
• Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com
Location : LAGOS::::;
• Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun.
Attendance is by invitation/limited spaces available.
Date: Sat 2nd April & Sat 9th April, 2016.
Payment must be made before/day of Seminar/Workshop
•
•
•

DATE: 2ND & 9TH, APRIL, 2016

1. FREE DESIGN & PROCESS PIPING SEMINAR
Geoken Tech is offering free training in the application of Oil and gas software
In the following areas:
Engineering design/Drafting (CADD)
Piping & Equipment design (PDMS)
Process Piping & Instrumentation control (P&ID)


MODULES
• EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger)
•
• PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\
• ISOMETRIC PIPING GENERATING
• Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout.

• Benefits:
• At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally.

• How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc).

• Target Audience
• All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers.

N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s.

• For seat reservation:
• Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com
Location : LAGOS::::;
• Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun.
Attendance is by invitation/limited spaces available.
Date: Sat 2nd April & Sat 9th April, 2016.
Payment must be made before/day of Seminar/Workshop
•
•
•

1. FREE DESIGN & PROCESS PIPING SEMINAR
Geoken Tech is offering free training in the application of Oil and gas software
In the following areas:
Engineering design/Drafting (CADD)
Piping & Equipment design (PDMS)
Process Piping & Instrumentation control (P&ID)


MODULES
• EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger)
•
• PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\
• ISOMETRIC PIPING GENERATING
• Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout.

• Benefits:
• At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally.

• How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc).

• Target Audience
• All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers.

N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s.

• For seat reservation:
• Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com
Location : LAGOS::::;
• Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun.
Attendance is by invitation/limited spaces available.
Date: Sat 4th April & Sat 11th April, 2016.
Payment must be made before/day of Seminar/Workshop
•
•
•

1. FREE DESIGN & PROCESS PIPING SEMINAR
Geoken Tech is offering free training in the application of Oil and gas software
In the following areas:
Engineering design/Drafting (CADD)
Piping & Equipment design (PDMS)
Process Piping & Instrumentation control (P&ID)


MODULES
• EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger)
•
• PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\
• ISOMETRIC PIPING GENERATING
• Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout.

• Benefits:
• At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally.

• How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc).

• Target Audience
• All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers.

N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s.

• For seat reservation:
• Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com
Location : LAGOS::::;
• Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun.
Attendance is by invitation/limited spaces available.
Date: Sat 4th April & Sat 11th April, 2016.
Payment must be made before/day of Seminar/Workshop
•
•
•

TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE,

A. AUTOCAD
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting
B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO)
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
Target Audience: Civil, Builders, Structural Engineers, Jobseekers
C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers

D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers


•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
Target Audience: Electrical, Mechanical, Instrumentation & control Engineers
F. BENTLEY AUTOPLANT (CAD 3DPLANT)
• Introduction to AutoCAD 3D Plant
• Create and configure a project
• Create and modify a 3D Plant modeling
• Pipes, Equipment and Structural modeling and modification
• Migrate project and drawing
Target Audience: Design/Piping Engineers

G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION)
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Importing well datas( Well heads, well logs, well deviation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application.
Volume Calculation.
Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir
Analyst, and other professionals

H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING
Available on Request:



Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, College
Bustop.
Ikotun, Lagos.
N:B: All necessary training materials and take home available
2. Engineering design/Piping, Structural videos & EBooks available.






[color=#770077][/color]

COMPANY PROFILE:
Geoken Tech Engineering: Is a Geotechnical/Subsurface, design firms having it core mandate in providing quality and affordable services. We also strive to ensure our company philosophy radiates out to our customers and suppliers in building a good relationship and achieve the highest quality result in any projects we undertake together.
OUR VISION
To be a company with strong foundation quality, professionalism and safety, delivery effective services to our clients, thereby becoming Nigeria’s company of choice in our area of expertise.

SERVICES
• Geotechnical Subsurface Engineering Investigation
• Borehole Drilling/Ground water control
• Foundation design/Analysis
• Soil testing, water treatment
• Piling design/Testing( PIT, PLT), Pile Caps construction
• Pre drilling Geophysical/Geological investigation
• Geographical information system Analysis ( GIS )
• Training of IT Students, graduates, in the field of Geotechnics
• Seismic & Reservoir studies using Geological software’s


MISSION STATEMENT
To be one of the leading geotechnics/Foundation and Reservoir simulation
Company by providing effective solutions to all geotechnical and reservoir
Problems.

OPERATING OFFICE
8, Omotayo Bello Street, Thomas Estate,
Ajah- Lagos.
Branch: 26, Ikotun-Idimu Road, Suite 15, Kazam Plaza
College Bustop, Ikotun- Lagos.
Tel: 08060360538, 08028553955
Email: kengeotech@yahoo
www.geokentech.com

OIL & GAS/ DESIGN SOFTWARE AND TRAINING MANUALS

The following oil and gas, Piping/Design manuals and software are available.
1. AUTOCAD ( Software, training manuals and videos)
2. PIPING & EQUIPMENT DESIGN (PDMS) - Software, manuals, videos
3. STRUCTURAL DESIGN OF REINFORCEMENT, SLAB, BEAMS & COLUMNS (STAADPRO) - Software, manuals, videos.
4. PROCESS DESIGN & OPTIMIZATION ( HYSYS): Software, manuals, videos
5. PIPING & INSTRUMENTATION DESIGN (P&ID): Software, manuals, videos.

To order contact: Geokentech (08060360538)
kengeotech@yahoo.com
Available in any part of the country: Get yourself equip with the latest oil and gas, design application.
PRICE: #5,000.

TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE,
MARCH, 2016)
A. AUTOCAD
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting
B. STRUCTURAL AND ARCHITECTRUAL DESIGN
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
STARTING DATE: 29TH February, 2016.( 6 classes)
C.PDMS (Plant Design Management System)
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings ( Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
STARTING DATE: 2ND MARCH, 2016( 7 classes)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
STARTING DATE: 7TH MARCH, 2016(5 CLASSES)
•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
STARTING DATE: 7TH MARCH, 2016(4 CLASSES)
•
F. BENTLEY AUTOPLANT (CAD 3DPLANT)
• Introduction to AutoCAD 3D Plant
• Create and configure a project
• Create and modify a 3D Plant modeling
• Pipes, Equipment and Structural modeling and modification
• Migrate project and drawing
STARTING DATE: 15TH MARCH, 2016 (7 CLASSES)

G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION)
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Importing well datas( Well heads, well logs, well deviation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application.
Volume Calculation.
STARTING DATE: 4TH, MARCH, 2016(5 CLASSES)

H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING
Available on Request:

The courses listed above from A-G, are relevant to the following areas of engineering. A, C, E, F (Mechanical, Civil, Electrical, Material/Metallurgical, Science graduates/Engineers).
B (Civil, Architectural, Structural Engineers). NB: ENROL FOR THE FOLLOWING
PROGRAMME (CAD,PDMS, HYSYS, P&ID, PETREL) NOW:::::
A, C, D, E (Chemical/Process Engineers)
G (Geologist/Petroleum Engineers)


Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, College B/stop,
Ikotun, Lagos.

TRAINING BROCHURE
A. AUTOCAD
• 2D Orthographic Draft
• 2D Isometric Draft
• 3D Modeling
• Piping General Arrangement Drafting (Drafting to scale with the use of pipe data)
• Piping Isometric Drafting
B. STRUCTURAL AND ARCHITECTRUAL DESIGN
• Structural elements (Columns, Beams, Slab and Foundation)
• Stair and Staircase, roofing, sectioning, Plan and Elevation.
STARTING DATE: 29TH February, 2016.( 6 classes)
C.PDMS (Plant Design Management System)
• Equipment Modeling
• Piping Modeling (Spooling and Routing), Pipe fittings ( Elbow, Valves, Tee, Flanges) routing.
• Structural Modeling
• Piping Isodraft
• Equipment Draft
STARTING DATE: 2ND MARCH, 2016( 7 classes)
D. Aspen HYSYS (Process Modeling and Simulation)
• Getting started with Hysys (Process modeling)
• Defining fluid package
• Installing stream utilities
• Customizing Hysys workbook
• Oil characterization
• Process optimization
• Gas gathering
• Process optimization
STARTING DATE: 7TH MARCH, 2016(5 CLASSES)
•
E. PIPING AND INSTRUMENTATION DESIGN (P&ID)
• Process flow diagram design and interpretation
• Assigning tags, control instruments to process equipment
• Detecting errors on flow line, using software(validation)
• Assigning specification to process lines
STARTING DATE: 7TH MARCH, 2016(4 CLASSES)
•
F. BENTLEY AUTOPLANT (CAD 3DPLANT)
• Introduction to AutoCAD 3D Plant
• Create and configure a project
• Create and modify a 3D Plant modeling
• Pipes, Equipment and Structural modeling and modification
• Migrate project and drawing
STARTING DATE: 15TH MARCH, 2016 (7 CLASSES)

G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION)
Data Import
Seismic Interpretation (Seismic layers, horizon)
Importing Seismic data into project
Importing well datas( Well heads, well logs, well deviation)
Fault Modeling (Geomodeling, Structural modeling)
Gridding
Layering
Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application.
Volume Calculation.
STARTING DATE: 4TH, MARCH, 2016(5 CLASSES)

H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING
Available on Request:

The courses listed above from A-G, are relevant to the following areas of engineering. A, C, E, F (Mechanical, Civil, Electrical, Material/Metallurgical, Science graduates/Engineers).
B (Civil, Architectural, Structural Engineers). NB: ENROL FOR THE FOLLOWING
PROGRAMME (CAD,PDMS, HYSYS, P&ID, PETREL) NOW:::::
A, C, D, E (Chemical/Process Engineers)
G (Geologist/Petroleum Engineers)


Contact: Ken Technologies on (08060360538, 08028553955).
kengeotech@yahoo.com

www.geokentech.com/training
Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate)
2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, College B/stop,
Ikotun, Lagos.

SEMINAR FOR GRADUATE/TRAINEE ENGINEERS & JOBSEEKERS
Seminar on oil & gas/structural design software application:
1. Design and drafting
2. Piping & Process optimization
3. Structural/Reinforcement design, interpretation
4. Process flow drafting, Instrumentation and Interpretation
5. Reservoir modeling, Seismic/Petro physical Analysis
6. Geotechnical Application
Target Audience: Engineers ( Mech, Civil, Electrical, Petroleum, Material/Mettalurgical),
Geologist, Process designer, NYSC Members, jobseekers.
DATE: SATURDAY, 20th FEBRUARY, 2016, TIME: 10.00AM
Venue: Suit 15, Kazam Plaza, College Bstop, Ikotun- Lagos.
Company: Geoken Tech( 08060360538/08028553955)
Email:kengeoetech@yahoo.com
www.geokentech.com
Fee: #5,000
N: B: Participant are to come with their laptops for software installation & manuals, also with writing
Materials.

STRUCTURAL DESIGN TRAINING USING STAADPRO
TRAINING MODULE MODULE DESCRIPTION
This course serves as a basic to intermediate level application of STAADPRO software for structural design of various types of structures. Participants are expected to have good grasp of structural design engineering principles.
Each participant provided a dedicated pc with the necessary software loaded and the training course will be an interactive sessions. The participants will also be given the opportunity to develop at least one project – specific deliverable during the training programme.
Course Content
MODULE 1: INTRODUCTION TO STAAD FOR STRUCTURES AND ANALYSIS AND DESIGN
• General Description
• Types Of Structure; Trusses , Frames, Shell etc
• Units
• Structures geometry and coordinate system
1. Global coordinate system
2. Local coordinate system
3. Relationship between global and local coordinate systems
• Member properties
• Member releases
• Basic support or boundary conditions
• Basic load definition and load generations
• Design capabilities
MODULE 2: MODEL GENERATION AND ANALYSIS OF SIMPLE STRUCTURES
• Setup ; templates or user-defined
• Geometry
1. Model generation using templates
2. Model Generation Using Member Incidences for Beams, Plates & Surfaces
3. Model Generation using Import from DFX file.
4. Model Modifications: Add, Remove, Move, Divide, Selection , Mesh Generations etc.Mirror, Delete etc. of Beam, Plates And Surfaces
• Member Properties: Material, Releases, Offsets Compression & Tension etc.
• Support; Foundation, Fixed, Pinned, Free, Enforced Spring etc.
• Loading ; Dead , Live, Wind And Combinations
• Analysis Options: Linear Static Analysis
• Design options
• Case Study 1- Modeling & Analysis of a Simple Structure
MODULE 3: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 2 : Structural Steel And Design for a 9m overhead water tank
• Interpretation of Result and Reporting
MODULE 4: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 3: Reinforced Concrete Building Design : Three Storey Building
• Interpretation of Results and Reporting
MODULE 5: ANALYSIS AND DESIGN CASE STUDIES
• Case Study 2: Structural Steel Analysis And Design for a 9m overhead water tank
• Case Study 3: Reinforced Concrete Building Design : Three Storey Building
MODULE 6: ADDITIONAL INFORMATION
• Q& A
• STAAD add –on modules
• Further analysis
Target Audience
Fresh Graduates and Design Engineers Involved In Structural Engineering Design, Civil Engineers
Call: Ken Technologies (08060360538, 08028553955)
kengeotech@yahoo.com

OIL & GAS TRAINING COURSES FOR FEB, 2016
The following oil and gas courses training are available for the Month of February, 2016
1. Design and drafting ( AutoCADD)
2. Piping & Process optimization( Hysys, PDMS)
3. Structural/Reinforcement design, interpretation( STAADPRO 8VI)
4. Process flow drafting, Instrumentation and Interpretation( P&ID)
5. Reservoir modeling, Seismic/Petro physical Analysis( PETREL SCHLUMBERGER)
6. Geotechnical Application, soil testing, analysis, Piling design and construction


Target Audience: Engineers ( Mech, Civil, Electrical, Petroleum, Material/Metallurgical),
Geologist, Process designer, NYSC Members, jobseekers
Starting Date: 15th FEBRUARY, 2016,
Morning Session: 10am-12.30pm
Afternoon Session: 2pm-4.30pm
Weekend Session: For working class individual/Personel
N.B: Geoken Tech also train individuals, company staff, design, supervise projects such as Piling, structural, Piping, soil investigation.
Contact: 8, Omotayo Bello Street, Thomas Estate, Ajah- Lagos.
Outlet: 26, IKotun Road, College Bustop, By Diamond Bank.
Ikotun, Lagos.
Email:kengeoetech@yahoo.com
www.geokentech.com

SEMINAR FOR GRADUATE/TRAINEE ENGINEERS & JOBSEEKERS
Seminar on oil & gas/structural design software application:
1. Design and drafting
2. Piping & Process optimization
3. Structural/Reinforcement design, interpretation
4. Process flow drafting, Instrumentation and Interpretation
5. Reservoir modeling, Seismic/Petro physical Analysis
6. Geotechnical Application
Target Audience: Engineers ( Mech, Civil, Electrical, Petroleum, Material/Mettalurgical),
Geologist, Process designer, NYSC Members, jobseekers.
DATE: SATURDAY, 6TH FEBRUARY, 2016, TIME: 10.00AM
Venue: Suit 15, Kazam Plaza, College Bstop, Ikotun- Lagos.
Company: Geoken Tech( 08060360538/08028553955)
Email:kengeoetech@yahoo.com
www.geokentech.com
Fee: #5,000
N: B: Participant are to come with their laptops for software installation & manuals, also with writing
Materials.

TRAINING ON CADD, PDMS, HYSYS, P&ID,
PETREL, STAADPRO FOR 2016

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends


2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends



3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks (3 times a week), or 3 Weeks ( Saturdays & Sundays)

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
www.geokentech.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

TRAINING ON CADD, PDMS, HYSYS, P&ID,
PETREL, STAADPRO FOR 2016

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends


2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends



3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks (3 times a week), or 3 Weeks ( Saturdays & Sundays)

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

TRAINING ON CADD, PDMS, HYSYS, P&ID,
PETREL, STAADPRO FOR 2016

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends


2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends



3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks (3 times a week), or 3 Weeks ( Saturdays & Sundays)

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

RESERVIOR SEISMIC – TO- SIMULATION TRAINING (PETREL) IN LAGOS.
Petrel is a software package, which is a product of Schlumberger that allows the user to build a reservoir model with properties to export to a simulator. Petrel is Windows based software for 3D visualization, 3D mapping and 3D reservoir modeling and simulation.
Our training and consulting company offer intensive application of Petrel in Seismic, 3D visualization, mapping, Well- logging, well heads, deviation, well tops, Fault and stratigraphical modeling.
COURSE MODULE
DAY 1 DAY 2 DAY 3 DAY 4
• Introduction Seismic Continuation Pillar gridding Geometrical modeling
• User Manual Edit Input data Make horizons Well logs
• Petrel Interface Well correlation Depth Conversion Facies modeling
• Data Input Fault modeling Make Zones Petrophysical modeling
• Seismic Layering
DAY 5
• Plotting
• Make contacts
• Volume calculation
Target Audience: Geoscientist, Petroleum Engineers, Graduate, NYSC Members, Jobseekers
Contact: Ken Technologies on 08060360538, 08028553955.
Email: kengeotech@yahoo.com
www.geokentech.com
Programe Duration: 5 lecture class: weekdays or 5 Saturdays ( Starting Date: February 1st , 2016)
FEE : 25K
Trainee Centre : 8, Omotayo Bello Street, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Rd, Suit 15, kazam plaza, Ikotun, Lagos.

TRAINING ON CADD, PDMS, HYSYS, P&ID,
PETREL, STAADPRO FOR 2016

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends


2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends



3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks (3 times a week), or 3 Weeks ( Saturdays & Sundays)

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

ORDER FOR OIL & GAS SOFTWARES ANY WHERE IN NIGERIA
Due to high demand and for easy accessibity, Geoken Tech (Oil and gas software trainer and
Consultant) as find a solution to deliver any of the following Oil & gas/Engineering software’s at your doorstep in any part of the country and beyond. The following software’s are available with installation guide:
1. AUTOCADD(32/64BIT)
2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)
3. P&ID(32/64 BIT)
4. AUTOCAD 3D PLANT (32/64 BIT)
5. STAADPRO- FOR STRUCTURAL DESIGN OF STEEL & CONCRETE
6. PETREL- FOR RESERVOIR & SEISMIC SIMULATION
7. HYSYS – FOR PROCESS DESIGN & OPTIMIZATION
8. GEOTECHNIC SOFTWARES – FOR SOIL INVESTIGATION, PILING

Each of the software comes with a learning guild, tutorials:
Call Geoken Tech on: 08060360538/08028553955 (for order)
Email: kengeotech@yahoo.com
N: B: Lagos residence can check on us @ our Lagos office ( Ikotun/Ajah).
Enhance your skills and keep standing::::

STAADPRO V8I ( STRUCTURAL DETAILING, RC BUILDING & CONCRETE, SLAB DESIGN)
COURSE OUTLINE: ( PART 1)
1. NAVIGATING THE STANDARD GRAPHICAL AND USER INTERFACE
2. CREATING STRCUTURE GEOMETRY
3. EDITING STRUCTURE GEOMETRY
4. VIEW STRUCTURE GEOMETRY
5. CREATING GROUP TO SELECT GROUPS OF ELEMENT
6. ASSIGNING SPECIFICATION TO MODEL & MEMBERS
7. ASSIGNING SUPPORT TO STRUCTURES ( PINNED, FIXED)

PART 2
1. DEFINING PRIMARY LOAD CASES & LOAD STRUCTURE
2. GENERATING LOAD ENVELOPES & REFERENCES LOAD
3. ANALYSING A MODEL
4. VERIFICATION OF ANALYSIS AND DESIGN RESULT
5. DESIGNING OF SLAB.
CONTACT: GEOKEN TECH (08060360538/08028553955)
EMAIL: kengeotech@yahoo.com
www.geokentech.com
8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, AJAH-LAGOS
OUTLET: 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, COLLEGE
BSTOP, BY DIAMOND BANK, IKOTUN, LAGOS.
STARTING DATE: 1ST FEB, 2016

TRAINING ON CADD, PDMS, HYSYS, P&ID,
PETREL, STAADPRO FOR 2016

1.) Oil and Gas Facilities Process System Engineering Design (P&ID, HYSYS)

About this Course: This module is designed for fresher & experience engineers from chemical, Gas, Petroleum or Mechanical background) who want to work as Chemical Process Engineer, Process Development Engineer or Project Engineer.

Program Duration: 4 weeks (3 Times a week) for Regular
4 weeks (Saturday & Sunday) for weekends
Starting date: 20TH JANUARY, 2016

2.) Oil and Gas facilities piping Systems Design ( PDMS, AUTOPIPE, AUTOCAD 3D PANT)

About this Course: This course is designed for engineers, experienced mechanical, facilities, plant or pipeline engineers & B.Tech/B.Eng, HND fresh graduates of Mechanical, Production, and Metallurgical Engineering Background.

Program Duration: 4 weeks (Mondays to Saturdays) for regular, 4 weeks (Saturday & Sunday) for weekends

Starting date: 15TH JANUARY, 2016

3.) Fundamentals of Engineering Design ( AUTOCAD (2D/3D), ISOMETRIC
About this Course: This course is designed for engineers, fresher, NYSC members pure and applied science graduates, seeking for opportunity in oil and gas, production, design, manufacturing industries.
Program Duration: 3 weeks (3 Times a week), 4weeks (Saturday & Sunday for weekends).
Starting date: 11TH JANUARY, 2016
4.) Structural Design of RC Building Columns, Beams, Load calculation, building displacement Analysis, Floor design, Slab etc) with Staadpro.Pro V8i
STAADPRO. V8I
About this course: This course is design for Structural, Civil, Building and Geotechnical Engineers, seeking for knowledge/Structural Software application.
Program Duration: 2 weeks (3 times a week), or 3 Weeks ( Saturdays & Sundays)
Starting Date: 25TH JANUARY, 2016

4.) PETREL (RESERVIOR/SEISMIC, PETROPHYSICAL ANALYSIS)
About this Course: This course is designed for Geologist, Petroleum/Reservoir engineers, fresher,
Undergraduates who want to work in Exploration and production, Geological firms.
Program Duration: 3 weeks (3 Times a week)
Starting date: 18TH JANUARY, 2015.
5.) GEOTECHNICAL ANALYSIS/INVESTIGATION (Piling, Soil, testing & Software application)
About this Course: This course is designed for Geologist, Civil, Geotechnical engineers, fresh
Graduates, who want to go into consulting, work in Construction/ Geotechnical industries.
Starting date: On Request


6.) Pipeline and Riser Systems Engineering Designs

About this Course: This course is designed for Graduate engineers with knowledge in piping system design (Mechanical, Metallurgical, Civil, Marine), Piping engineers switching to pipeline engineering.

Program Duration: 4 weeks (3 Times a week)








7.) GEOGRAPHIC INFORMATION SYSTEM (GIS)

About this Course: This course is design for Graduates of Geography, Meteorology, Climatology, Geology, Urban and Regional Planning, Environmental Management, Surveying, Geoinfomatics and natural resources background.

Program Duration: 3 weeks
Starting date: On Request


SPECIALIZED MODULES

Engineering Division:
1. Oil and Gas Project Planning, Scheduling and Cost Control
2. Tank Farm Operations and Maintenance
3. Field Instrumentation & Basic Process Control
4. Fundamentals of Process Safety Management

There is a wide selection of modules on offer within the programme, covering the most relevant areas of Energy and Technology in the Oil and Gas industry. At the end of the programme, you will have the capacity to demonstrate evidence of your competency.

Note: Each session is limited to 12 participants


HOW TO APPLY

For more enquiries, on Oil and Gas Training, email: kengeotech@yahoo.com
Tel: 08060360538/08028553955
Offices: 8, Omotayo Bello Close, Thomas Estate, Ajah, Lagos.
Outlet: 26, Ikotun Road, Suit 15, Kazam Plaza, By Diamond Bank
College Bustop, Ikotun, Lagos.

TRAINING!TRAINING!TRAINING!!!
We thank you for your patronage and support in 2015. We are ever ready to provide sterling services
In the the following areas of software application use in the Oil and Gas sector, come 2016. Enroll for one 5 DAYS training on any of the following Oil and gas course.
1. AutoCAD( 2D/3D) ---------------( #20,000.00), DURATION, 5 DAYS ( MON-FRI) 10am -1pm
2. PIPING (PDMS, P&ID), AUTOPLANT -------( #20,000,00), DURATION, 5 DAYS (MON-FRI) 1.30 pm- 3.30pm
3. PROCESS DESIGN & OPTIMIZATION(HYSYS)-----( #20,000.00), DURATION, 5DAYS (MON-FRI) 4pm-6pm
4. RESERVOIR ANALYSIS ( PETREL) ----------(#20,000.00), DURATION, 5DAYS (MON-FRI) 11am -12.30pm
5. PIPE STRESS ANALYSIS ( CEASER 11)
6. STRUCTURAL DESIGN ( STAADPRO------------( #20,000.00), DURATION, 5DAYS (MON-FRI) 2pm-4pm
7. GEOTECHNICAL INVESTIGATION
Our training/ Consultancy opening from Wednesday, 13th, 2016. For enquiry and registration details call
Geoken Tech on (08060360538/08028553955)
Email: kengeotech@yahoo.com
www.geokentech.com
Our training venue is situated @ 8, Omotayo Bello Street, Thomas Estate, Ajah- Lagos.

B. Mainland Centre= 26, Ikotun Road, By Diamond Bank, College Bustop, Kazam Plaza, Suite 15.
NB: This Bonanza last till end of January, 2016

GEOTECHNICAL INVESTIGATION TRAINING
Geoken Engineering services, is a involve in geotechnical study, Drilling, material and soil
Investigation, Piling and Foundation Engineering. We undergo training for participant seeking
An in-depth knowledge in the following Geotechnical/Geophysical areas:
1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case
Study. A. Sieve Analysis
B. CPT (Cone penetration Test), SPT (Standard penetration test)
C. Triaxial testing
D. Bearing Capacity Test.
E. Borehole drilling and Geophysical survey.
2. Foundation Engineering: A. Pile integration testing and Pile construction
B. Pile load test
3. Geophysical/ Reservoir Analysis: (Petrel software application) for reservoir characterization and Estimation.
GEOTECHNICAL SOIL INVESTIGATION (CPT/SPT, PILE TESTING, SURFACE DRILLING TECHNOLOGY).

WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students,
Geotechnical survey Engineers, Engineers, Hydrographers, Surveyors, IT students
Email: kengeotech@yahoo.com
www.geokentech.com
08060360538, 08028553955
Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza,
College Bustop, Ikotun, Lagos.
Or, 8, Omotayo Bello Street, Thomas,Ajah, Lagos.

We train job seekers/ IT students on field geotechnical survey, piling design and construction, borehole drilling, data interpretation and report writing. At a subsidize fee, contact! Geoken( 08060360538)

TRAINING!TRAINING!TRAINING!!!
We thank you for your patronage and support in 2015. We are ever ready to provide sterling services
In the the following areas of software application use in the Oil and Gas sector, come 2016. Enroll for one 5 DAYS training on any of the following Oil and gas course.
1. AutoCAD( 2D/3D) ---------------( #20,000.00), DURATION, 5 DAYS ( MON-FRI) 10am -1pm
2. PIPING (PDMS, P&ID), AUTOPLANT -------( #20,000,00), DURATION, 5 DAYS (MON-FRI) 1.30 pm- 3.30pm
3. PROCESS DESIGN & OPTIMIZATION(HYSYS)-----( #20,000.00), DURATION, 5DAYS (MON-FRI) 4pm-6pm
4. RESERVOIR ANALYSIS ( PETREL) ----------(#20,000.00), DURATION, 5DAYS (MON-FRI) 11am -12.30pm
5. PIPE STRESS ANALYSIS ( CEASER 11)
6. STRUCTURAL DESIGN ( STAADPRO------------( #20,000.00), DURATION, 5DAYS (MON-FRI) 2pm-4pm
7. GEOTECHNICAL INVESTIGATION
Our training/ Consultancy opening from Wednesday, 13th, 2016. For enquiry and registration details call
Geoken Tech on (08060360538/08028553955)
Email: kengeotech@yahoo.com
www.geokentech.com
Our training venue is situated @ 8, Omotayo Bello Street, Thomas Estate, Ajah- Lagos.

B. Mainland Centre= 26, Ikotun Road, By Diamond Bank, College Bustop, Kazam Plaza, Suite 15.
NB: This Bonanza last till end of January, 2016

TRAINING!TRAINING!TRAINING!!!
We thank you for your patronage and support in 2015. We are ever ready to provide sterling services
In the the following areas of software application use in the Oil and Gas sector, come 2016. Enroll for one 5 DAYS training on any of the following Oil and gas course.
1. AutoCAD( 2D/3D) ---------------------------( #20,000.00), DURATION, 5 DAYS ( MON-FRI)
2. PIPING (PDMS, P&ID), AUTOPLANT---------------------( #20,000,00), DURATION, 5 DAYS (MON-FRI)
3. PROCESS DESIGN & OPTIMIZATION(HYSYS)----------( #20,000.00), DURATION, 5DAYS (MON-FRI)
4. RESERVOIR ANALYSIS ( PETREL) ------------------------(#20,000.00), DURATION, 5DAYS (MON-FRI)
5. PIPE STRESS ANALYSIS ( CEASER 11)
6. STRUCTURAL DESIGN ( STAADPRO)--------------------( #20,000.00), DURATION, 5DAYS (MON-FRI)
7. GEOTECHNICAL INVESTIGATION
Our training/ Consultancy opening from Monday, 13th, 2016. For enquiry and registration details call
Geoken Tech on (08060360538/08028553955)
Email: kengeotech@yahoo.com
www.geokentech.com
Our training venue is situated @ 8, Omotayo Bello Street, Thomas Estate, Ajah- Lagos.

B. Mainland Centre= 26, Ikotun Road, By Diamond Bank, College Bustop, Kazam Plaza, Suite 15.