Pipedraft's Posts
Nairaland Forum › Pipedraft's Profile › Pipedraft's Posts
1 2 3 4 5 6 7 8 ... 13 14 15 16 17 18 19 20 (of 20 pages)
 Career › Autocad.pdms, Petrel, P&id,, Hysy Training In Lagos( May 2016) by pipedraft(op): 2:37pm On May 27, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING 5. STAADPRO( STRCUTURAL DESIGN & RC BUILDING 6. ORION ( STEEL & CONCRETE DESIGN) 7. GEOTECHNICAL & GEOPHYSICAL SITE ANALYSIS N.B: Software’s/EBooks’ will be given to participant. STARTING DATE: 1ST -15TH JUNE, 2016 Fee : ( #30,000.00 Per Course) WEEKENDS TRAINING AVAILABLE TRAINING CENTRE: 26, IKOTUN RD, COLLEGE BSTOP (SUIT 15, KAZAM PLAZA) AJAH CENTRE: 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, AJAH-LAGOS. CONTACT: GeokenTech (08060360538, 09084881939) Email:geokentech@yahoo.com www.geokentech.com/training Participant should send names, Phone nos, & course of interest to the above numbers & Email |
| Career › Important To All Abuja Resident( Cadd, Pdms, Hysys, Petrel, P&id, Staadpro) by pipedraft(op): 3:13pm On May 25, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN ABUJA ( JUNE EDITION) N.B: Send names and phone number to kengeotech@yahoo.com, 08060360636 to book a seat. A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers & other Professionals. H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad.pdms, Petrel, P&id Training In Lagosi( May 2016) by pipedraft(op): 4:25pm On May 23, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D)--- Target Audience ( Mechanical, Civil, Electrical Engineers, NYSC Members & Jobseekers) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)------Target Audience( Mechanical, Chemical, Process Engineers) 3. HYSYS(PROCESS DESIGN & OPTIMIZATION)-------Target Audience( Process, Chemical Engineers, NYSC Members, Graduates) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING)----Target Audience( Geologist, Petroleum Engineers, Engineers)Geophysicist, Reservoir ) 5. STAADPRO( RC BUILDING DESIGN, STEEL/CONCRETE DESIGN)----Target Audience( Civil, Structural Engineers, builders, NYSC Members) N.B: Software’s/EBooks’ will be given to participant. STARTING DATE: Monday, 23RD MAY 2016. WEEKENDS TRAINING AVAILABLE TRAINING CENTRE: 26, IKOTUN RD, COLLEGE BSTOP (SUIT 15, KAZAM PLAZA) CONTACT: GeokenTech (08060360538, 09084881939) Email:geokentech@yahoo.com www.geokentech.com/training Participant should send names, Phone nos, & course of interest to the above numbers & Email
|
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki( Weekends Class) by pipedraft(op): 2:59pm On May 19, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN AJAH/LEKKI (WEEKENDS) N.B: interested participant should send names, number, and starting date to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , Outlet: 26 Ikotun Road, College Bustop, Ikoton- Lagos( Beside Diamond Bank, Kazam Plaza) N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad.pdms, Petrel, P&id Training In Lagosi( 23rd, May 2016) by pipedraft(op): 4:45pm On May 18, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D)--- Target Audience ( Mechanical, Civil, Electrical Engineers, NYSC Members & Jobseekers) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)------Target Audience( Mechanical, Chemical, Process Engineers) 3. HYSYS(PROCESS DESIGN & OPTIMIZATION)-------Target Audience( Process, Chemical Engineers, NYSC Members, Graduates) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING)----Target Audience( Geologist, Petroleum Engineers, Engineers)Geophysicist, Reservoir ) 5. STAADPRO( RC BUILDING DESIGN, STEEL/CONCRETE DESIGN)----Target Audience( Civil, Structural Engineers, builders, NYSC Members) N.B: Software’s/EBooks’ will be given to participant. STARTING DATE: Monday, 23RD MAY 2016. WEEKENDS TRAINING AVAILABLE TRAINING CENTRE: 26, IKOTUN RD, COLLEGE BSTOP (SUIT 15, KAZAM PLAZA) CONTACT: GeokenTech (08060360538, 09084881939) Email:geokentech@yahoo.com www.geokentech.com/training Participant should send names, Phone nos, & course of interest to the above numbers & Email
|
| Career › Oil & Gas Software Application Training ( Starting, 23rd May) by pipedraft(op): 2:26pm On May 17, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D)--- Target Audience ( Mechanical, Civil, Electrical Engineers, NYSC Members & Jobseekers) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)------Target Audience( Mechanical, Chemical, Process Engineers) 3. HYSYS(PROCESS DESIGN & OPTIMIZATION)-------Target Audience( Process, Chemical Engineers, NYSC Members, Graduates) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING----Target Audience( Geologist, Petroleum Engineers, Engineers)Geophysicist, Reservoir ) 5. STAADPRO( RC BUILDING DESIGN, STEEL/CONCRETE DESIGN)----Target Audience( Civil, Structural Engineers, builders, NYSC Members) N.B: Software’s/EBooks’ will be given to participant. STARTING DATE: Monday, 23RD MAY 2016. WEEKENDS TRAINING AVAILABLE TRAINING CENTRE: 26, IKOTUN RD, COLLEGE BSTOP (SUIT 15, KAZAM PLAZA) CONTACT: GeokenTech (08060360538, 09084881939) Email:geokentech@yahoo.com www.geokentech.com/training Participant should send names, Phone nos, & course of interest to the above numbers & Email
|
| Career › Autocad.pdms, Petrel, P&id Training In Lagos( May Edition) by pipedraft(op): 11:33pm On May 13, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN LAGOS N.B: interested participant should send names, number, and starting date to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , Outlet: 26 Ikotun Road, College Bustop, Ikoton- Lagos( Beside Diamond Bank, Kazam Plaza) N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Weekends Class On Oil & Gas Training In Ajah/lekki by pipedraft(op): 5:27pm On May 10, 2016 |
OIL & GAS TRAINING COURSES IN AJAH (WEEKENDS CLASS) A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Free Seminar On Autocad & Process Piping Design (pdms) In Ajah/lekki by pipedraft(op): 8:38am On May 05, 2016 |
GeokenTech is organizing a Seminar/Workshop on AutoCAD/PROCESS PIPING DESIGN (PDMS) VEN:8, OMOTAYO BELLO CLOSE, THOMAS ESTATE,AJAH-LAGOS BY ABRAHAM ADESANYA RD, DOREN HOSPITAL DATE: 7TH, MAY 2016 (11.00AM) 08060360538, kengeotech@yahoo.com
|
| Career › Free Seminar On Autocad & Process Piping Design (pdms) by pipedraft(op): 5:17pm On May 04, 2016 |
FREE SEMINAR ON AUTOCAD & PROCESS PIPING DESIGN ( PDMS) IN AJAH/LEKKI Geoken Tech is organizing a Seminar/Workshop on oil and gas software application: 1. AUTOCAD 2. PROCESS PIPING (PDMS) TARGENT AUDIENCE: Mechanical, Civil, Process/Chemical Engineer, Science graduates and NYSC Members. FEE: #5000(EBooks and software’s) VENUE: 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, LAGOS BY ABRAHAM ADESANYA RD, DOREN HOSPITAL DATE: 7TH, MAY 2016 ( 11.00AM)
|
| Career › Oil And Gas Software Training In Lagos ( May Batch) by pipedraft(op): 12:37pm On May 02, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN LAGOS N.B: interested participant should send names, number to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , Outlet: 26 Ikotun Road, College Bustop, Ikoton- Lagos( Beside Diamond Bank, Kazam Plaza) N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad.pdms, Petrel, P&id Training In Lagosi( Reg In Progress) by pipedraft(op): 4:51pm On Apr 29, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN AJAH/LEKKI N.B: interested participant should send names, number to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. Outlet: 26, Ikotun/Idimu Road, College Bustop, Ikotun, Lagos. N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki( Reg In Progress) by pipedraft(op): 2:40pm On Apr 28, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN AJAH/LEKKI N.B: interested participant should send names, number to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki by pipedraft(op): 5:17pm On Apr 25, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN AJAH/LEKKI N.B: interested participant should send names, number to 08060360538, kengeotech@yahoo.com A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers Analyst and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Training days: Fridays & Saturdays Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Coming Up In Abuja, Oil & Gas Training ( June Edition) by pipedraft(op): 11:35am On Apr 23, 2016 |
AUTOCAD, PDMS, P&ID , HYSYS, PETREL TRAINING IN ABUJA ( JUNE EDITION) N.B: Send names and phone number to kengeotech@yahoo.com to book a seat. A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- Target Audience: Civil, Builders, Structural Engineers, Jobseekers B .PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers C. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • D. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers E. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas ( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrel software application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum, & Reservoir Engineers & other Professionals. H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING TRAINING Available on Request: Contact: Geoken Tech: (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training N: B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Oil & Gas Training Courses In Ajah ( April Batch) by pipedraft(op): 12:24pm On Apr 21, 2016 |
OIL & GAS TRAINING COURSES IN AJAH, APRL BATCH A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) Along Abraham- Adesanya Road, Ajah-Lagos. , Training days: Fridays & Saturdays N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad, Pdms, Hysys, Petrel, Staadpro Training In Lagos ( April Batch) by pipedraft(op): 4:15pm On Apr 16, 2016 |
TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE, APRIL 2016) A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016) B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling ( Application of PDMS software in modeling beams, collums, plate & Panels) • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers Training date: 13th – 22nd (April, 2016) D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers Training Date: 18th – 25th (April, 2016) • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers Training date 18th -22nd (April, 2016) F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Training Date: 25th – 29th (April, 2016) Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Process Piping Engineering/stress Analysis Training by pipedraft(op): 4:37pm On Apr 14, 2016 |
GEOKEN TECH kengeotech@yahoo.com 8, Omotayo Bello Street, Thomas Estate Ajah- Lagos Outlet: 26, Ikotun Rd, Suit 15, Kazam Plaza, College Bustop, Ikotun- Lagos. 08060360538, 08028553955 PROCESS PIPING ENGINEERING & DESIGN/INTERPRETATION WITH PDMS, P&ID, CEASER II Program Description This program is designed to present all major topics to the detailed engineering and layout design of piping system. Its covers elementary topics in fabrication, pipe sizing, pipe routing. COURSE OUTLINE: Module 1: Process Piping Engineering & design Piping Fundamentals Based on ASME B13.3 codes and standard • Introduction • ASME Codes and Standard • Pipe – Definition, Manufacturing methods, connection types, sizing’s, NPS, DN • Pipes fittings- Definition, types, Elbows ( 45, 90, 180, LR, SR) Reducers, Tees, O-lets, Drafting symbols etc) • Flanges- types, application, & use, pounds rating • Valves- Types, used, application • Mechanical/ Process equipment • Flow Diagrams • Piping specification • Piping & Equipment layout • Piping Isometric & Piping spools • Pipe Supports MODULE 2: PIPE STRESS ANALYSIS (CEASER II) • Introduction Pipe stress • Pipe Span calculation • Sustained Loads & Occasional Loads • Flexibility Analysis using code equation CEASER II: Static analysis of • Piping components • Load case analysis • Expansion Loops, Angers, etc MODULE 3: PDMS (PLANT DESIGN MANAGEMENT SYSTEM) • 3D Plant Layout, facilities, equipment and Piping design of an oil refinery processing Plant • Drafting, Piping Isometrics, Material take off/Bill of Quantity (MTO/BOQ) • Use of PDMS Tools bar What you will learn: How to perform detail Engineering design & drafting and Layout of chemical Plant, Petroleum refinery, Gas Processing Plant, Petrochemical, Pharmaceutical and Textile Plant. Who should attend? Mechanical/ Chemical/Process/Petroleum Engineers Technicians, Draftsmen, Other Persons with interest in Piping Engineering Materials (Take Home) Training manuals, full version of PDMS & CEASER II Software, Process & Piping Engineering ebooks, Design charts, tables, and Participate will be awarded certificate upon completion of course. COURSE FEE BREAKDOWN: Module 1: Process Piping Engineering = #25,000 Module 2: PDMS (PLANT DESIGN MANAGEMENT SYSTEM) = # 45,000 Module 3: CEASER II( PIPE STRESS ANALYSIS) = # 30,000
|
| Certification And Training Adverts › Process Piping Engineering Design /interpreation With Pdms, Cease Ii, P&id by pipedraft(op): 3:13pm On Apr 13, 2016 |
GEOKEN TECH kengeotech@yahoo.com 8, Omotayo Bello Street, Thomas Estate Ajah- Lagos Outlet: 26, Ikotun Rd, Suit 15, Kazam Plaza, College Bustop, Ikotun- Lagos. 08060360538, 08028553955 PROCESS PIPING ENGINEERING & DESIGN/INTERPRETATION WITH PDMS, P&ID, CEASER II Program Description This program is designed to present all major topics to the detailed engineering and layout design of piping system. Its covers elementary topics in fabrication, pipe sizing, pipe routing. COURSE OUTLINE: Module 1: Process Piping Engineering & design Piping Fundamentals Based on ASME B13.3 codes and standard • Introduction • ASME Codes and Standard • Pipe – Definition, Manufacturing methods, connection types, sizing’s, NPS, DN • Pipes fittings- Definition, types, Elbows ( 45, 90, 180, LR, SR) Reducers, Tees, O-lets, Drafting symbols etc) • Flanges- types, application, & use, pounds rating • Valves- Types, used, application • Mechanical/ Process equipment • Flow Diagrams • Piping specification • Piping & Equipment layout • Piping Isometric & Piping spools • Pipe Supports MODULE 2: PIPE STRESS ANALYSIS (CEASER II) • Introduction Pipe stress • Pipe Span calculation • Sustained Loads & Occasional Loads • Flexibility Analysis using code equation CEASER II: Static analysis of • Piping components • Load case analysis • Expansion Loops, Angers, etc MODULE 3: PDMS (PLANT DESIGN MANAGEMENT SYSTEM) • 3D Plant Layout, facilities, equipment and Piping design of an oil refinery processing Plant • Drafting, Piping Isometrics, Material take off/Bill of Quantity (MTO/BOQ) • Use of PDMS Tools bar What you will learn: How to perform detail Engineering design & drafting and Layout of chemical Plant, Petroleum refinery, Gas Processing Plant, Petrochemical, Pharmaceutical and Textile Plant. Who should attend? Mechanical/ Chemical/Process/Petroleum Engineers Technicians, Draftsmen, Other Persons with interest in Piping Engineering Materials (Take Home) Training manuals, full version of PDMS & CEASER II Software, Process & Piping Engineering ebooks, Design charts, tables, and Participate will be awarded certificate upon completion of course. COURSE FEE BREAKDOWN: Module 1: Process Piping Engineering = #25,000 Module 2: PDMS (PLANT DESIGN MANAGEMENT SYSTEM) = # 45,000 Module 3: CEASER II( PIPE STRESS ANALYSIS) = # 30,000 Training Date: Monday 25th, April – 9th May, 2016
|
| Education › Project Managemet Training ( April, 2016 Batch) by pipedraft(op): 2:55pm On Apr 13, 2016 |
MICROSOFT PROJECT TRAINING GeokenTech, a training/consulting firm based in Lagos, welcome you to the April/May 2016 edition of PMP (Project Management Professional training program me). Ms. Project is a project Management software used to manage projects: COURSE MODULE • Introduction to MS Project • Planning a Project • Create a Project • Create calendar-Project working time • Project Scheduling • Create and assign resources • Execute and track project progress • Project reporting • Importing/Exporting of project Training Package: * PMI accredited training manual PMI Handbook Certificate of training Call GeokenTech ( 08060360538, 08028553955) kengeotech@yahoo.com Training Fee: #30,000
|
| Career › Autocad, Pdms, Hysys, Petrel, Staadpro Training In Lagos ( April Batch) by pipedraft(op): 10:05pm On Apr 11, 2016 |
TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE, APRIL 2016) A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016) B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling ( Application of PDMS software in modeling beams, collums, plate & Panels) • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers Training date: 13th – 22nd (April, 2016) D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers Training Date: 18th – 25th (April, 2016) • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers Training date 18th -22nd (April, 2016) F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Training Date: 25th – 29th (April, 2016) Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Autocad, Pdms, Hysys, Staadpro, Petrel Training In Lagos ( April Batch) by pipedraft(op): 9:57pm On Apr 11, 2016 |
TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE, APRIL 2016) A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016) B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling ( Application of PDMS software in modeling beams, collums, plate & Panels) • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers Training date: 13th – 22nd (April, 2016) D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers Training Date: 18th – 25th (April, 2016) • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers Training date 18th -22nd (April, 2016) F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Training Date: 25th – 29th (April, 2016) Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Free Seminar On Autocad, Piping Design (pdms) For Engineers, Jobseekers by pipedraft(op): 2:23pm On Apr 07, 2016 |
1. FREE DESIGN & PROCESS PIPING SEMINAR Geoken Tech is offering free training in the application of Oil and gas software In the following areas: Engineering design/Drafting (CADD) Piping & Equipment design (PDMS) Process Piping & Instrumentation control (P&ID) MODULES • EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger) • • PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\ • ISOMETRIC PIPING GENERATING • Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout. • Benefits: • At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally. • How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc). • Target Audience • All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers. N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s. • For seat reservation: • Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com Location : LAGOS::::; • Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun. Attendance is by invitation/limited spaces available. Date: Saturday 9th April, 2016. Payment must be made before/day of Seminar/Workshop • • •
|
| Career › Autocadd, Pdms, Hysys, P&id, Petrel Training In Lag(april, Batch) by pipedraft(op): 10:03pm On Apr 04, 2016 |
TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE, APRIL 2016) A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting-------Training date: 11th – 25th ( APRIL, 2016) B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers Training date: 13th – 22nd (April, 2016) D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers Training Date: 18th – 25th (April, 2016) • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers Training date 18th -22nd (April, 2016) F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Training Date: 25th – 29th (April, 2016) Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Microsoft Office Project Training In Lagos by pipedraft(op): 5:20pm On Apr 03, 2016 |
MICROSOFT PROJECT TRAINING GeokenTech, a training/consulting firm based in Lagos, welcome you to the April/May 2016 edition of PMP (Project Management Professional training program me). Ms. Project is a project Management software used to manage projects: COURSE MODULE • Introduction to MS Project • Planning a Project • Create a Project • Create calendar-Project working time • Project Scheduling • Create and assign resources • Execute and track project progress • Project reporting • Importing/Exporting of project Training Package: * PMI accredited training manual PMI Handbook Certificate of training Call GeokenTech ( 08060360538, 08028553955) kengeotech@yahoo.com Training Fee: #30,000 Training Centre: 26, Ikotun Idimu Road, College Bustop, Ikotun- Lagos.
|
| Career › Free Seminar On Autocad & Pdms In Lagos( Reg In Progress) by pipedraft(op): 2:12pm On Apr 01, 2016 |
1. FREE DESIGN & PROCESS PIPING SEMINAR Geoken Tech is offering free training in the application of Oil and gas software In the following areas: Engineering design/Drafting (CADD) Piping & Equipment design (PDMS) Process Piping & Instrumentation control (P&ID) MODULES • EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger) • • PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\ • ISOMETRIC PIPING GENERATING • Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout. • Benefits: • At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally. • How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc). • Target Audience • All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers. N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s. • For seat reservation: • Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com Location : LAGOS::::; • Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun. Attendance is by invitation/limited spaces available. Date: Sat 2nd April & Sat 9th April, 2016. Payment must be made before/day of Seminar/Workshop • • • |
| Career › Free Seminar On Autocad & Piping Design ( Pdms) by pipedraft(op): 11:28pm On Mar 30, 2016 |
DATE: 2ND & 9TH, APRIL, 2016
|
| Career › Free Seminar On Autocad & Pdms In Lagos( Reg In Progress) by pipedraft(op): 2:33am On Mar 25, 2016 |
1. FREE DESIGN & PROCESS PIPING SEMINAR Geoken Tech is offering free training in the application of Oil and gas software In the following areas: Engineering design/Drafting (CADD) Piping & Equipment design (PDMS) Process Piping & Instrumentation control (P&ID) MODULES • EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger) • • PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\ • ISOMETRIC PIPING GENERATING • Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout. • Benefits: • At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally. • How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc). • Target Audience • All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers. N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s. • For seat reservation: • Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com Location : LAGOS::::; • Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun. Attendance is by invitation/limited spaces available. Date: Sat 2nd April & Sat 9th April, 2016. Payment must be made before/day of Seminar/Workshop • • •
|
| Career › Free Seminar On Autocad & Pdms In Lagos( Reg In Progress) by pipedraft(op): 5:04pm On Mar 22, 2016 |
1. FREE DESIGN & PROCESS PIPING SEMINAR Geoken Tech is offering free training in the application of Oil and gas software In the following areas: Engineering design/Drafting (CADD) Piping & Equipment design (PDMS) Process Piping & Instrumentation control (P&ID) MODULES • EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger) • • PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\ • ISOMETRIC PIPING GENERATING • Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout. • Benefits: • At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally. • How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc). • Target Audience • All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers. N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s. • For seat reservation: • Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com Location : LAGOS::::; • Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun. Attendance is by invitation/limited spaces available. Date: Sat 4th April & Sat 11th April, 2016. Payment must be made before/day of Seminar/Workshop • • •
|
| Career › Free Seminar On Autocad & Pdms In Lagos by pipedraft(op): 1:11am On Mar 19, 2016 |
1. FREE DESIGN & PROCESS PIPING SEMINAR Geoken Tech is offering free training in the application of Oil and gas software In the following areas: Engineering design/Drafting (CADD) Piping & Equipment design (PDMS) Process Piping & Instrumentation control (P&ID) MODULES • EQUIPMENT DESIGN( vessels, Pumps, Heat Exchanger) • • PIPING DESIGN (Explicit piping for piping, mechanical & Process engineers)\ • ISOMETRIC PIPING GENERATING • Process & Instrumentation Control ( Requirement for Process diagram, Assigning spec to flow lines, attaching controls to valves, equipment, flow lines, checking for flow errors), Displaying flow and pressure control on P&ID layout. • Benefits: • At the end of the seminar/workshop participants will be given certificate of participation recognized worldwide and accepted locally. • How to secure jobs in oil/gas, design companies ( Nigeria, Dubai, Quatar, Saudi Arabia, etc). • Target Audience • All graduates ( OND, HND, BSC), Process, chemical, Mechanical, Electrical, Civil Engineers, jobseekers. N>B: Please note that though the training is Fee, #5,000 will be paid for certificates, materials and software’s. • For seat reservation: • Send Name, mobile, Email to ( 08060360538, kengeotech@yahoo.com Location : LAGOS::::; • Register in our office/training centre @ Kazam Plaza, 26, Ikotun Idimu Rd, College Bustop, Ikotun. Attendance is by invitation/limited spaces available. Date: Sat 4th April & Sat 11th April, 2016. Payment must be made before/day of Seminar/Workshop • • •
|
| Career › Engineering Design & Piping Training & Certification by pipedraft(op): 9:32am On Mar 17, 2016 |
TRAINING BROCHURE( FOR OIL & GAS/ DESIGN, PIPING COURSE, A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals H: GEOTECHNICAL/SUBSURFACE INVESTIGATION/PILING DESIGN/TESTING Available on Request: Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) 2.Ikotun(26, Ikotun/Idimu Road, Suit 15, Kazam Plaza, College Bustop. Ikotun, Lagos. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available. [color=#770077][/color]
|
