Does putting the fuel tank half way affect the generator's performance overtime or does it spoil or damage something over time?

Emykray:
Does putting the fuel tank half way affect the generator's performance overtime or does it spoil or damage something over time?

No, putting fuel in tank half way does not affect the performance of your genset over time. However, running the genset dry everytime reduces the lifespan of your carburettor and should be avoided if possible to extend its lifespan.

Pussyassniggar:
ELEPAQ SV12000e2

6Kva

250k negotiable

Location is Lagos state

You can come with your engineer for inspection

Contact is on signature

still available

Emykray:
Does putting the fuel tank half way affect the generator's performance overtime or does it spoil or damage something over time?

This has no effect on fuel consumption, why do it?

Gptech:

This has no effect on fuel consumption, why do it?

80% of Nigerians believe it reduces the fuel consumption me included

Urchman27:
80% of Nigerians believe it reduces the fuel consumption me included

including me lol....

Friends Good day, my junior of 4 months suddenly start dropping fuel from the carbrator. What can I do to rectify it.

Can my 2.5kva gen power 1.5hp Ac

Davy950:
Can my 2.5kva gen power 1.5hp AC

Yes if it is an inverter AC (not advisable though), and No if its the conventional AC..

Harryfrosh:
including me lol....

Hehehe, its a simple experiment you can try anyday .

Artzdanielsz:
Friends Good day, my junior of 4 months suddenly start dropping fuel from the carbrator. What can I do to rectify it.

Have you tampered with drain bolts? If yes kindly tight it properly

If no, change the O-rings or check the needle valve and clear any debris to avoid overflow from your carb

fashrola:


Have you tampered with drain bolts? If yes kindly tight it properly

If no, change the O-rings or check the needle valve and clear any debris to avoid overflow from your carb

What's o ring and needle valve

CAN PISTON AND RIMS MAKE A GENERATOR WEAK AMD SOUND BAD?

Artzdanielsz:

What's o ring and needle valve

O ring is the black sealing ring around the float bowl

Find below on how to clean your carburettor (This is for I pass my neighbor gen) but still applies to bigger generator

More

Agparis100:
CAN PISTON AND RIMS MAKE A GENERATOR WEAK AMD SOUND BAD?

Worn piston rings can cause the piston head itself to rub against the combustion block wall of the engine. The piston's movement causes more noise because of increased friction and can damage the engine block over time.

You will also notice a drop in performance of the engine too since the suction and exhaust pressure will be impeded because of the worn piston rings.

fashrola:


O ring is the black sealing ring around the float bowl

Find below on how to clean your carburettor (This is for I pass my neighbor gen) but still applies to bigger generator

Thanks

Pussyassniggar:
ELEPAQ SV12000e2

6Kva

250k negotiable

Location is Lagos state

You can come with your engineer for inspection

Contact is on signature

still available

Where can someone get original honda ring in Lagos, I stayed around yaba.

Hi Venus,

Thank you for sharing this. How much did you get the inverter for?
Can you please refer your inverter guy to me? I am planning to get an inverter soon.

IamVenus:


Good Evening. I’ve been using it for 4 years now and it’s been great. I recently changed the batteries to Tubular batteries though (October 2021). The old batteries served me for almost 3 years.

No complaints whatsoever. It powers my fans, TVs , laptops, just the general lightweight household appliances. We generally have good power supply in our neighborhood (hence why I never owned a generator) but with this recent power issues, it lasted almost 48hours with no charging. We didn’t turn on the TVs though.

Hello prof. I need your professional advice regarding this two generators:
TEC OPTIMA4000ES 3.75KVA/3KW
210cc single cyclinder engine
Blue colored
and
TEC HUSTLER4000ES 3.75KVA/3KW
233cc single cylinder engine
Yellow colored.
Which is better all round?
Thanks as I anticipate your kind response.

smartzee01:
Hello prof. I need your professional advice regarding this two generators:
TEC OPTIMA4000ES 3.75KVA/3KW
210cc single cyclinder engine
Blue colored
and
TEC HUSTLER4000ES 3.75KVA/3KW
233cc single cylinder engine
Yellow colored.
Which is better all round?
Thanks as I anticipate your kind response.

I think the blue one

2felix:


I think the blue one

Thanks

Hello house,

A quick one, can a shaky/noisy crankshaft and maybe bad connecting rod make a gen burn oil?

Does the color affect its proper function?

I think the blue one[/quote]

Please my ‘I better pass my neighbor gen’ is leaking oil from the exhaust. What could be the cause

GoodMorning Guys.. What's the best generator I can get below 120k...a very Good and lasting that can carry 0.75Hp submersible pump

Good morning professor
I just got 3.75KVA TEC and I was told to drain the oil after 24 hours. Please is this really needed?
Also must I use SAE 20W-50 oil for the gen and which brand will you recommend?

Thank you

I have a 3.5kva elepaq Generator. I notice it’s consuming oil this days. Am currently changing the oil every 2weeks now and it was not like that before.

I only put the generator on from 8pm-2pm daily on a average.

Yesterday i notice it will on few few minutes and it will go off, this usually happens when i need to change the oil.


Another question if i want to change oil, must i remove everything inside before adding another one to it, or i can just top it up.

Please i need reply.

Thanks

MBofLife:
Hi Venus,

Thank you for sharing this. How much did you get the inverter for?
Can you please refer your inverter guy to me? I am planning to get an inverter soon.

I have a generator for sale, nurenberg tools a German gen

Gen for sale, quote me if interested