₦airaland Forum

GAZZUZZ:
2.0 or 2.4L

I have finally seen it

It's a 2.0L engine

Pls I have an issue with honda accord 2008, 4 cylinder.

Was driving when suddenly, it stopped on the road , it cranks on each trial , but engine wont start.

An electrician and mechanic were called.

Discovered fuel was getting to the engine meaning the fuel pump was ok.


Checked/Tested the spark plugs with the ignition coil and discovered that there was no sparks at the plug head.
Suspecting it was a current issue.

All other sensors connection that was seen still looked connected.

Scanned diagnosis brought like 66 errors codes ,

We suspected brainbox, we brought another brainbox , called someone to program the brainbox. The car started, tried moving front and back, the car moved . BUT THE DRIVE GEAR KEEPS BLINKING.


The brainbox programmer said its because the last serial digit on the new ECM was not exact.

We rescanned with the new ECM and error codes was reduced to 5 error codes


So pls I want to know-
- if the problem is really the brainbox or should another electrician check for something else?

-Can the old brainbox be fixed?

-How much is cost of Honda Accord 2008 brainbox (pple are telling me 170k, which I think is expensive)?

-Finding the exact brainbox has been difficult in PH, what guarantees do I have on brainbox brought from outside the state (Lagos,Onitsha).

Pls help

GAZZUZZ:
4cylinder what engine type?

Pls what do you mean by engine type?
So that I can research it.

All I know for now is that its 4 cylinder honda accord 2008

Pls I am an issue with honda accord 2008, 4 cylinder.

Was driving when suddenly, it stopped on the road , it cranks on each trial , but engine wont start.

An electrician and mechanic were called.

Discovered fuel was getting to the engine meaning the fuel pump was ok.


Checked/Tested the spark plugs with the ignition coil and discovered that there was no sparks at the plug head.
Suspecting it was a current issue.

All other sensors connection that was seen still looked connected.

Scanned diagnosis brought like 66 errors codes ,

We suspected brainbox, we brought another brainbox , called someone to program the brainbox. The car started, tried moving front and back, the car moved . BUT THE DRIVE GEAR KEEPS BLINKING.


The brainbox programmer said its because the last serial digit on the new ECM was not exact.

We rescanned with the new ECM and error codes was reduced to 5 error codes


So pls I want to know-
- if the problem is really the brainbox or should another electrician check for something else?

-Can the old brainbox be fixed?

-How much is cost of Honda Accord 2008 brainbox (pple are telling me 170k, which I think is expensive)?

-Finding the exact brainbox has been difficult in PH, what guarantees do I have on brainbox brought from outside the state (Lagos,Onitsha).

Pls help

Pls I am an issue with honda accord 2008, 4 cylinder.

Was driving when suddenly, it stopped on the road , it cranks on each trial , but engine wont start.

An electrician and mechanic were called.

Discovered fuel was getting to the engine meaning the fuel pump was ok.


Checked/Tested the spark plugs with the ignition coil and discovered that there was no sparks at the plug head.
Suspecting it was a current issue.

All other sensors connection that was seen still looked connected.

Scanned diagnosis brought like 66 errors codes ,

We suspected brainbox, we brought another brainbox , called someone to program the brainbox. The car started, tried moving front and back, the car moved . BUT THE DRIVE GEAR KEEPS BLINKING.


The brainbox programmer said its because the last serial digit on the new ECM was not exact.

We rescanned with the new ECM and error codes was reduced to 5 error codes


So pls I want to know-
- if the problem is really the brainbox or should another electrician check for something else?

-Can the old brainbox be fixed?

-How much is cost of Honda Accord 2008 brainbox (pple are telling me 170k, which I think is expensive)?

-Finding the exact brainbox has been difficult in PH, what guarantees do I have on brainbox brought from outside the state (Lagos,Onitsha).

Pls help

Pls I am an issue with honda accord 2008, 4 cylinder.

Was driving when suddenly, it stopped on the road , it cranks on each trial , but engine wont start.

An electrician and mechanic were called.

Discovered fuel was getting to the engine meaning the fuel pump was ok.


Checked/Tested the spark plugs with the ignition coil and discovered that there was no sparks at the plug head.
Suspecting it was a current issue.

All other sensors connection that was seen still looked connected.

Scanned diagnosis brought like 66 errors codes ,

We suspected brainbox, we brought another brainbox , called someone to program the brainbox. The car started, tried moving front and back, the car moved . BUT THE DRIVE GEAR KEEPS BLINKING.


The brainbox programmer said its because the last serial digit on the new ECM was not exact.

We rescanned with the new ECM and error codes was reduced to 5 error codes


So pls I want to know-
- if the problem is really the brainbox or should another electrician check for something else?

-Can the old brainbox be fixed?

-How much is cost of Honda Accord 2008 brainbox (pple are telling me 170k, which I think is expensive)?

-Finding the exact brainbox has been difficult in PH, what guarantees do I have on brainbox brought from outside the state (Lagos,Onitsha).

Pls help

Pls I am an issue with honda accord 2008, 4 cylinder.

Was driving when suddenly, it stopped on the road , it cranks on each trial , but engine wont start.

An electrician and mechanic were called.

Discovered fuel was getting to the engine meaning the fuel pump was ok.

Checked/Tested the spark plugs with the ignition coil and discovered that there was no sparks at the plug head.
Suspecting it was a current issue.

All other sensors connection that was seen still looked connected.

We suspected brainbox, we brought another brainbox , called someone to program the brainbox. The car started, tried moving front and back, the car moved . BUT THE DRIVE GEAR KEEPS BLINKING.

The brainbox programmer said its because the last serial digit on the new ECM was not exact.

So pls I want to know-
- if the problem is really the brainbox or should another electrician check for something else?

-Can the old brainbox be fixed?

-How much is cost of Honda Accord 2008 brainbox (pple are telling me 170k, which I think is expensive)?

-Finding the exact brainbox has been difficult in PH, what guarantees do I have on brainbox brought from outside the state (Lagos,Onitsha).

Pls help

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com

Good day,

Looking for someone that can help to make 3d models (final submit in blend or obj files) for simple equipments at a fee

You can mail me:

visitrotimi@gmail.com