₦airaland Forum

someone help me please.....I need to replace the Samsung screen.


@wiseandtrue
@antina

Try and pay for brand new, and see if you feel like you are paying less.

toluxa1:
That's one of the reason's I'm hesitant. But should it still be consuming alot of fuel even when there is minimal load on it? Like just lights, fridge and freezer? Maybe a 1.5hp inverter AC sometimes.



Remote is available and still works fine.

The guy has agreed for 300k by the way. I don't know why I'm feeling like I'm still paying too much

Wiseandtrue:
quote author=olafyn post=46514782]wit 20k it can b fixed 4 u in alaba
One thing I love about Nairaland is it ability to remain a solution ground.
So I would like to thank you all for your lovely contribution most especially you Olafyn and Antina for a way out.
My TV is already fixed and I am enjoying every bit of it.
Thanks guys.

Good day buddy.
Please assist me with the number of the person who fixed the screen. I have a 49' Samsung that needs to be fixed please.
Help me ageg.

is the s10 plus negotiable?

Fommz:
IPhone Xr FU
64GB
Battery Health- 99%
178k.

Samsung S10 Plus
Negligible Single Hairline crack at the lower left side of the screen..
150k


Lagos.
Call/WhatsApp 09090938875

i like your sincerity. keep it up.

[quote author=Joselph95 post=96712489][/quote]

qdlvy:
Apple Watch Series 6
44mm GPS only
with straps and charging cable
AIN = 185k
New condition 10/10
*************

Apple Watch Series 6
40mm GPS Only
Product Red
Box and accessories
AIN = 180k
New condition 10/10
*************


Apple Watch SE
40mm GPS and Cellular
Brand New Sealed
GOLD and Pink sport band = 160k
Space Gray and Black Sport band = 155k
3 pcs available
**************

Samsung Galaxy Note 20 5G
Brand new
Box and accessories
Factory Unlocked
AIN = 275k
**************

Whatsapp +13128660412

Is the Note 20 Brand new and Unused? I'm asking this since the box is already opened?

Still available?

why not get an un-used tyre and place the gen on it. you will get a balanced position by doing so.

fineboynl:
the generator is not a on level ground. it's difficult to use the meter. sometime when it's in the other position and I open the oil tank. it spilled oil to the ground. I bought 4 tire on it. and the 4 legs are not lapping well on the ground it wobbles.

Final Update!!
Gen has been tweaked.
I now have my 1 litre = 2hrs 15mins back.
Gen is running smoothly, no flickering, no issues.

I AM HAPPY.
Special thanks to @suco01 and others who have contributed to this thread. May God bless us all.

sexycdor:
Update!!!
The 2 litres used 3hours (7.40pm - 10.35/40pm)
This is an improvement compared to what the technician but I still want my 1 litre 2hrs 30mins back. Lolz.

suco01:
3

Thank you very much Brother.

space9880:
this your gen clean o

Lolz, maintenance culture is key. I clean it in out anytime I pour fuel or change oil. Gen is 2yrs plus old. A friend saw it and said shy you just buy am ni, he didn't believe its has dagba

Which of these screws do I adjust to save fuel please?

Update!!!
The 2 litres used 3hours (7.40pm - 10.35/40pm)
This is an improvement compared to what the technician but I still want my 1 litre 2hrs 30mins back. Lolz.

sexycdor:
I really don't know why nobody responded to my post which makes me very sad and hurt. I almost sold the gen for 20k today.

However, I thank you all as well for this post. After reading almost 30 pages on this thread and some video online. I decided to go for a new carburetor, fixed myself, did some little servicing and I am glad to tell you my gen's operation is back to normal. Cool sound, 220/225 volt, and working steady. Currently testing with an accurately measured 2 litres to know how long it will last.

THANK YOU ALL.
God bless you

BoboKush:
Wow thats good
U av to know the level of ur gen issh is kinda technical so it nt everybody that can help

Also concerning ur carburettor when u av a new gen and u av issue don't always let them take the follow come part away...... Normally even if it carburettor has issue it can be fixed and follow come is always follow come.... They always work better than new one

2. U shld find one good engineer or let people around u recommend for u..... Don't always give ur gen to diff. Engineer get a good one n be stable with it

3. Good u said u do service the gen urself n I hope u r using good oil..... If u r doing all these I don't think u shld be having issh

The only tym engineer Wil touch ma gen na if na engine problem others I fix it masef and I don't like diff. Hands touching it

Good u av been able to fix it up urself
Next tym u need smal gen.... Go for Haier thermocool
Enjoy

Thank you very much buddy. Guess what? I didn't allow the guy to take the follow come away. I just loosened the gen again this morning after I've read a lot about carburetors. I put back the follow come tht was condemned. Hmmm, my gen is working fine, stable, 220-224v (after I've loaded all appliances (1 bedside freezer, 3 ceiling fans, 7 fluorescent bulbs, 1 led TV, dvd, 2 laptops and phones of course). Light not flickering.

I will find it very hard to trust any gen engineer again o. Honestly. Imagine sticking to Technician A who collected 4k and never rigged the gen (which was why he collected money for), or Technician B who kept doing rubbish.

I once again thank everyone who has contributed on this thread..

I will update once the 1 liter is done (to know how long it last, it was lasting 2hrs 30mins before the rancor) . I might still need to modify the adjustment screws cos I already tamper with it a lot, used it as practical when it was condemned.

Lastly, see attached picture. Is the place I pointed at meant to be very hot in a short time after gen is powered on?

space9880:
I don't know what you mean by hot cos any generator that is working cannot be cool. when there is issue of oil drying up the culprit is mostly the rings and pistons and it happens mostly when we overwork our Gen (too much load) because your Gen can pump water does not mean it is strong enough if you do it over time it will break down and it is usually the rings and piston.

Thanks a lot for your response buddy. I understand.

sexycdor:
Help please

I really don't know why nobody responded to my post which makes me very sad and hurt. I almost sold the gen for 20k today.

However, I thank you all as well for this post. After reading almost 30 pages on this thread and some video online. I decided to go for a new carburetor, fixed myself, did some little servicing and I am glad to tell you my gen's operation is back to normal. Cool sound, 220/225 volt, and working steady. Currently testing with an accurately measured 2 litres to know how long it will last.

THANK YOU ALL.
God bless you

Help please

sexycdor:
I bought my Sumec Firman SPG-1800 Feb 2018. I have been using it with no issue, no flickering, steady light and from my observation, 1 ltr lasts 2hrs 30mins. Hence using 3 litres last around 7 hrs which was okay.
I service myself by cleaning air filter, draining oil and fill with super v. I've had no course to change anything on it (not even the plug) since then, but I noticed I change oil very frequent. If i fill up with new oil today, i'll have to top up in the next 4-5 days as the oil would be very low. I use the gen for at least 6 hours a day.

Issue started few weeks ago when the voltage wasn't up to 220v anymore.

Technician A came to check, said it needs rigging (for the oil consumption), capacitor (for the under 220v), he collected N5000, oil consumption issue persisted, but voltage became stable (i saw him adjust the under-tank screw). the oil would just disappear and i won't see any trace on the floor.

Technician B came and said Technician A never rigged the gen.
Along the line, Technician B changed the carburetor, now my gen's work isn't smooth anymore. i get flickering light, irregular sound (alternating sound). I am currently thinking of selling it off as the problem is now becoming too much but before i do that, I want to seek help from all of you pros. I loved this gen so much as i enjoyed it's work before this issues started. i really don't think i can trust any of these technicians again.

Technician C came, adjusted the carburetor and under-tank screw, light was stable, I switched it on this night, issue came back (irregular sound, flickering light)

Note: i never called back technician A after i was told the gen was never rigged. someone told me Technician A has placed his hand on it (like jazz or something that until i call him back, any other person that work on it wont' be successful), to hell with him, i will never call him ever.

I INTEND TO DIY HENCEFORTH..
1. Can I get out of the box carburetor that I can install and won't need any adjustment?
2. Does adjusting the "under-tank screw" and "firing screw" do any help?
3. 3 litres I tested with tonight barely used 4hrs (7.30pm - 11.50pm)!!
4. Carburetor has been labelled to make the directions for you guru easier.

Please Help Me.....i am tired already.

Attached is the gen's picture and the removed carburetor.

sexycdor:
I bought my Sumec Firman SPG-1800 Feb 2018. I have been using it with no issue, no flickering, steady light and from my observation, 1 ltr lasts 2hrs 30mins. Hence using 3 litres last around 7 hrs which was okay.
I service myself by cleaning air filter, draining oil and fill with super v. I've had no course to change anything on it (not even the plug) since then, but I noticed I change oil very frequent. If i fill up with new oil today, i'll have to top up in the next 4-5 days as the oil would be very low. I use the gen for at least 6 hours a day.

Issue started few weeks ago when the voltage wasn't up to 220v anymore.

Technician A came to check, said it needs rigging (for the oil consumption), capacitor (for the under 220v), he collected N5000, oil consumption issue persisted, but voltage became stable (i saw him adjust the under-tank screw). the oil would just disappear and i won't see any trace on the floor.

Technician B came and said Technician A never rigged the gen.
Along the line, Technician B changed the carburetor, now my gen's work isn't smooth anymore. i get flickering light, irregular sound (alternating sound). I am currently thinking of selling it off as the problem is now becoming too much but before i do that, I want to seek help from all of you pros. I loved this gen so much as i enjoyed it's work before this issues started. i really don't think i can trust any of these technicians again.

Technician C came, adjusted the carburetor and under-tank screw, light was stable, I switched it on this night, issue came back (irregular sound, flickering light)

Note: i never called back technician A after i was told the gen was never rigged. someone told me Technician A has placed his hand on it (like jazz or something that until i call him back, any other person that work on it wont' be successful), to hell with him, i will never call him ever.

I INTEND TO DIY HENCEFORTH..
1. Can I get out of the box carburetor that I can install and won't need any adjustment?
2. Does adjusting the "under-tank screw" and "firing screw" do any help?
3. 3 litres I tested with tonight barely used 4hrs (7.30pm - 11.50pm)!!
4. Carburetor has been labelled to make the directions for you guru easier.

Please Help Me.....i am tired already.

Attached is the gen's picture and the removed carburetor.

@enochogaga et all, please help me

I bought my Sumec Firman SPG-1800 Feb 2018. I have been using it with no issue, no flickering, steady light and from my observation, 1 ltr lasts 2hrs 30mins. Hence using 3 litres last around 7 hrs which was okay.
I service myself by cleaning air filter, draining oil and fill with super v. I've had no course to change anything on it (not even the plug) since then, but I noticed I change oil very frequent. If i fill up with new oil today, i'll have to top up in the next 4-5 days as the oil would be very low. I use the gen for at least 6 hours a day.

Issue started few weeks ago when the voltage wasn't up to 220v anymore.

Technician A came to check, said it needs rigging (for the oil consumption), capacitor (for the under 220v), he collected N5000, oil consumption issue persisted, but voltage became stable (i saw him adjust the under-tank screw). the oil would just disappear and i won't see any trace on the floor.

Technician B came and said Technician A never rigged the gen.
Along the line, Technician B changed the carburetor, now my gen's work isn't smooth anymore. i get flickering light, irregular sound (alternating sound). I am currently thinking of selling it off as the problem is now becoming too much but before i do that, I want to seek help from all of you pros. I loved this gen so much as i enjoyed it's work before this issues started. i really don't think i can trust any of these technicians again.

Technician C came, adjusted the carburetor and under-tank screw, light was stable, I switched it on this night, issue came back (irregular sound, flickering light)

Note: i never called back technician A after i was told the gen was never rigged. someone told me Technician A has placed his hand on it (like jazz or something that until i call him back, any other person that work on it wont' be successful), to hell with him, i will never call him ever.

I INTEND TO DIY HENCEFORTH..
1. Can I get out of the box carburetor that I can install and won't need any adjustment?
2. Does adjusting the "under-tank screw" and "firing screw" do any help?
3. 3 litres I tested with tonight barely used 4hrs (7.30pm - 11.50pm)!!
4. Carburetor has been labelled to make the directions for you guru easier.

Please Help Me.....i am tired already.

Attached is the gen's picture and the removed carburetor.

What's your current prices please?

sexycdor:
iPhone 6s 16GB/64GB. It works perfectly and has no fault whatsoever. It has no scratch at all.
Status: UK, Cleanliness: 10/10
Extras: Pouch, Glass protector, Charger w/ cable (Orig).
Updated!! Price: N120,000 (16gb), N140,000 (64gb)

Purchase/Inquiries/More Pics: Pls See Signature (whatapp, voice, sms)
Yemi
Genuine ElectroniX

Still much available buddies.....

Update: SOLD!
Iphone 6 Plus 128GB. It works perfectly and has no fault whatsoever. However, it has a small slight crack at the lower side of the screen. This does not affect the operation of the phone at all as it shows and touches perfectly.
Status: Naija, Neatness: 8/10
Extras: None
Price: N140,000

Purchase/Inquiries/More Pics: Pls See Signature (whatapp, voice, sms)

Yemi
Genuine ElectroniX

iPhone 6s 16GB/64GB. It works perfectly and has no fault whatsoever. It has no scratch at all.
Status: UK, Cleanliness: 10/10
Extras: Pouch, Glass protector, Charger w/ cable (Orig).
Updated!! Price: N120,000 (16gb), N140,000 (64gb)

Purchase/Inquiries/More Pics: Pls See Signature (whatapp, voice, sms)
Yemi
Genuine ElectroniX

koskilala:
You don't have tecno phantom 7??

No please.

SOLD!!
Original (doubt not) Samsung S7 Edge 32GB, 4GB RAM. It works perfectly and has no fault whatsoever.
Status: UK, Neatness: 9/10
Extras: Spigen Back case
Price: N140,000

Purchase/Inquiries/More Pics: Pls See Signature (whatapp, voice, sms)
Yemi
Genuine ElectroniX

SOLD!!
Huawei Honor 8 32GB Dual SIM with a RAM of 4GB. It works perfectly and has no fault whatsoever. As a matter of fact, it can be taken for a brand new phone.
Status: UK, Neatness: 10/10
Extras: Transparent thick pouch, Glass protector, Charger & Cable (all original).
updated!! Price: N110,000

Purchase/Inquiries/More Pics: Pls See Signature (whatapp, voice, sms)
Yemi
Genuine ElectroniX

Huawei Honor 8 32gb (UK used, dual sim, white, with complete access): N120k
Samsung S7 Edge 32gb (UK used, white, + spigen case): N130k
Iphone 6s 64gb (UK used, grey, + usb, charger, pouch): N140k
Iphone 6s 16gb (UK used, gold/grey, with usb, charger, cable, pouch, prot glass): N125k
Iphone 6 Plus 128gb (Naija used (receipt availabe), grey, usb cable only): N140k

For Inquiry/Purchase/To See images: 08086900588
Genuine ElectroniX
Yemi

ajepako:
Get to ldunmota last bus stop

Cross over to Nnamdi Azikwe Street

Ask for Dosunmu market

The entire market from its middle to the end is where you buy baby stuff in large number and cheap too.

Happy shopping

Thank you very much. I was there and easily located the place. It was actually cheap. Thank you once again. Bless ya

@ajepako, @udysweet @all
Good morning
please I need to get baby stuffs (cot, bathing set, etc).
Kindly assist on where to get good stuffs at considerably cheap price abeg. I intend to go today (this morning).
Help!!

okonja:
Giyf

abeg nao