₦airaland Forum

bloomstar:
What of diamond bank savings account. Who knows about that. The xchange rate and if adsense pays directly to it. Thanks

Adsense pays directly to all Nigerian Commercial banks, provided you entered the correct Swift codes. Exchange rate is what's different for different banks

pacespot:
or second attempt, it depends, so that you're not left hanging with the verification

ok. thanks

pacespot:
You don't need PIN, you can verify your address directly by uploading your Voters card or National ID on this page, make sure the contact address on your AdSense corresponds with the one on your ID

https://support.google.com/adsense/contact/id_verification

Receiving your PIN via postal mail in Nigeria can be a heck of trouble.

I thought this can be done after the 3rd request for PIN? abi.

TheSpellChecker:
Sir, what exactly are you trying to EXPAND?

I believe the right word is actually expatiate.

. Thanks for the correction

bluefilm:
Highest I have ever waited for was 6 days after Google sent out the payment.



I use Savings Account.

The Access Bank boys will normally call me to inform me that I have received foreign payment in Euros and they will ask me if I want it to be converted to Naira and paid into my savings account.

That's how I roll.

I was called too, but being my first use with them, I asked them to pay in Naira...so they paid @330/$. Do they call you everytime you get payment, so I can wait for their next call when Next am getting paid.
Your earnings are in Euros, that's why they pay you 367/Euro...

bluefilm:
I don't think you're right.

I receive AdSense payment with Access Bank Savings Account.

The exchange rate is #367.

Be like say GT don dey chop you since and you no even know?

How come you were paid $367, na Dorm Account you dey use? my last payment was 330/$ oo...

exporters101:
There's actually no one way to it, you can send a pm

Sent...

exporters101:
You have $10 in your AdSense account, you top it up to $100. After finalizing from Google, you could have $90-$95 to receive. Impressions will be created and balanced for the top up, so traffic isn't really key.

PS: This is not a blogger's approach, it's for smart head bloggers.

How exactly do you TopUp? pls

exporters101:
GT is more flexible, I've been using it for like 2 years now. It's not a difficult process to apply if you've your identifications ID, preferably international passport.

AdSense is really good money making ways especially in this era of top up, you earn more than you work for if you're smart.

what do you mean by TopUp, can you please expatiate...biko

emmyw:
First Bank Is 350/$

Please are you very sure about this?

ayufun:
OP, You don't have to worry yourself, You CAN coz I do and receive payment every month. The exchange rate is #325 and it's the highest when compared to other banks accepting savings account. Just fill the account number, account name, bank name and swift/bid code (GTBINGLA) in AdSense payment.. that's all... Don't worry going to the bank.

......... I write for Techpally.com.......

This is Wrong, Access pay 330/$

learning

Tabbaz:
kindly drop evidence of this claim and your wish shall be done.

Thank you

He uses the same number as Obynoblitz ... Screenshot attached below

Tabbaz:
FRAUDSTER LIST CONTINUATION

52. 07010815602
53. 09064316457 - uniquepita
54. 08163665016, - Adeyemi4God. culosjames@gmail.com
55. 07036146722, 09069739603 - CBN block ATM scam technique
56. 07066050637 - hency96
57. 07039613330
FirstBank
Ogundipe Timileyin
3110799156

58. phones - 07085287572, 07068414989

07012411256- Name: Angau Musa Abigail
Bank: Diamond Bank. (0077608410)
Monika: Dinar
His other details are available at number 13 on the list

59. bandwagon, Pushplay, Ybnr, Drift, Celibate, Dlguy 08023026434, 08103443450
Name...Adeoluwa Ajisafe

GTB bank data..0037285998

60. 08146838186
61. 07011531539
62. 08087820904 - Acher
63. SOFTBOY (also called Softboiy) . Oghogho Ojoghan Theodore. Account No: 0123742837. Bank: GTB. Phone: 08147655893
64. Polonium - 08050683606, 08064073948, paulvelly2010@gmail.com
65. - 07031642467
66. dongalaxy - 08126980742
67. 09078988972
68. iyke2015 - 08181992194, 08132419329
0086542729, ikechi Mark Uwa Diamond bank

69. dameddy - 08032523833
70. Ajudin - 09025060242
71. Liyamar - 08062188645
72. obynoblitz - 08139176433
Obinnaya Kanu
GTB - 0220971884
73. seromegee -09079378755
Account number: 2057282028
Account name: Kingsley Osiagwu
Bank: UBA
74. Garner - 08145285404

Tabbaz, Obynoblitz is also Same Person as Obysolid of #72...Kindly Update the list so He won't use the Moniker to Scam.

tycoon101:
i can buy it from you with the fund just contact me

eyah! boss, The account has been terminated, I was able to withdraw the $70

your battery may need to be replaced.

temizeee:
After charging for like 6hours, all my tab got was 1%. Please help!!!

sorry for the late reply.
Which part of the country are you?

You no sabi drive ni, or do you have other things doing that earn you better money, Transportation of Goods/passenger is a sure way to earn really well with the vehicle.
If this kind vehicle lands in anoda pesin, bukata ti biya niyen faa.

Chelsea fans will be silent 4-1 week

bobowaja:
Create another account and be careful and don't use airtel network

Okay.
I don't use airtel network at all.

nice info

bobowaja:
Your account has been blocked. either your IP keep changing or you used some of the details you use to open previous accounts.

i only have a single account. it may be that my IP changed. Can the account be revived, or I'll need to open a new account?

Aunty Elenu

bobowaja:
Thanks baba

Hello boss, its been a while here, Kudos to you for your selfless service here.
I discovered that all hoplinks generated for my Clickbank products promotion always failed to work, giving error as shown in the image, what could have caused this, and How do I restore this to normal. Awaiting your response sir. thanks.

This really is bad, and will make it very hard to be a partner...

KvotheLamora:
Heyyy, prota 18 is out, and it integrates RC and steel composite structures...its actually pretty Cool! You should definitely go download it, it's available on p30downloads

Thanks very much for the info, I already downloaded the file, just to install it.

tycoon101:
you're welcom

its been a while boss. Hope you re doing good?

ubatech:
Hello Tongsman,
If I may suggest, I'd advice u rerun ur model from scratch. If U import ur axis/grid lines again, and d design hangs again, then I suggest u remodel without importing those axis. See if u can remodel by drawing ur axis lines from scratch without importing. From ur uploaded image, ur design hangs just at the building model check at the building analysis design. The building model check is the part where the program checks the grid lines and their proper intersection. So if the axis lines don't intersect at a point, that is, if two or more grid lines don't intersect at A POINT, it will hang at that design stage.

Thanks for the intervention, you are correct sir, when I remodel without importing axes and columns, the analysis ran successfully.

KvotheLamora:
Well that was a long time back, I was just starting out then, I used orion to design it because at that time I only knew orion and Robot structural analysis, but I detailed RC columns and bases manually on AutoCAD based on my design results. And I also manually adjusted the orion details on the slab...but like I said, it was a while back, right now looking at it I am somewhat....ashamed...I've gotten loads better and neater under some strict tutors and very picky clientele. If you or anyone else needs structural designs you can call me on +2348138202649.

Ohh! nice. No need to be ashamed, since you know you've really improved.
Though I just start my training on the use of CADS (AutoCAD, Orion, Prota structure at the moment), I wish to be very proficient in a number of CADs software to fit in the current trend in the field of Engineering.

Nice thread OP, this will go a long way to help Training Engineers like my self in gaining more knowledge in the use of CADs for Engineering works.

sentaljohn:
it happens atimes when the memory is overloaded (taking too long on a project is one of the cause).....closing and restarting refreshes the memory... well-done sir

glad I was able to help

I'm grateful for the help.

my processor is 2.53ghz,
Yes, I imported the file (Axis and Column) from AutoCad.

all hands point to the file being larger dan wot ur system fit execute. buh b4 concluding, try open a new project and model the same structure on it and see what happens

- I will try this and get back you later. thanks very much.

Modified
I did that now, it didn't hang. what could have caused it hang before?

sentaljohn:
your system spec is more than OK...
have u run any analysis on this software b4 or this is your first?

am afraid the only option is to reinstall the Orion 18 in case of any corrupted file....... or you simply install the update that comes with the software

I haven't as i Just started, however, to the number 2 question above, i tried running analysis of a simple structure, and it was hitch-free, Orion didn't hang, I then tried running the analysis of the former project and it got hanged again.
What doo you thing could be the problem?