₦airaland Forum

[quote author=calabardick post=85050013][/quote]idioko, utom abadie

computerglobal:
Mail Sent

Recieved with thanks

computerglobal:
Done

Yet to get it
uwemjack2000@yahoo.com omitted the *c* previously

[quote author=computerglobal post=82531847][/quote]Uwemjack2000@yahoo.com

4t1bk36b37u187391 help with report. Thanks

How much

Mjkwess:
Offer ends tomorrow..call 08141573299 for inspection and payment

Location?

GAZZUZZ:
Car creeper board.

Good innovation. Permission to replicate this!

GAZZUZZ:
then it seems you don't know our in house lecturer

Telling someone to go hang himself is serious, no matter the history behind it?

dannybrasky:
It's not that hard if it hurt your feelings,ogbeni lecturer if u can't stand it kindly take the route below

This is very wrong even as a joke.

Cosplay:
2002 Toyota Camry

He did not buy an accidented car!
The accident as shown here was in 2014 and someone bought it repaired it and used it till he decided to sell it at auction in 2019! five years later!

OP Instead of arguing or contesting the facts accept and excuse your oversight and continue your sales. The accident is not severe

gigtrainee:
/b]

Thanks

Help with the report of jthba30g765164277. Thanks

Debosneh31:
I scanned the car and it brings P1705 short in transmission range switch circuit. Honda civic 05. solution please

https://www.google.com/url?sa=t&source=web&rct=j&url=%23&ved=2ahUKEwinq_2FoMnjAhUUV8AKHS67CHkQwqsBMAF6BAgHEAo&usg=AOvVaw0VTJzWxrN8ZFOD4xbU2nov

Debosneh31:
Please how much can I get Honda Civic 05 gear switch, the gear doesn't shift and kazeem said I should change the switch... Urgent please

If i guess right you don't need to change the switch it needs to be reset. It's a safety mechanism on the car, the car was still rolling when you shifted gear into park. So its now hard to shift your gear to park, drive or reverse, pressing the gear release botton may help start the car but it goes back to being hard.

If the symptoms described above is what you are experiencing and you are diy the attached will help.

Am interested in the black camry, more pictures will help

uwemjack:
1.6m ready

�

[quote author=computerglobal post=78871830][/quote]You are spamming!

Kindly help with this vin 2hgfa16527h023707. Thanks

amSTARboy:
Civic

1.6m ready

What is wrong with the asian specs?

jceesquare:
Great Choice, but make sure it's American specs.

Do not go for the Asian spec.

How to estimate cost of painting.

In terms of paying labour for setting the blocks.
Two options
- you can pay them per block between ₦45 to ₦50 per block or
- daily payment but with a minimum of 100 blocks layed per day

For those who want to know materials required
For total number of blocks multiply the area of the wall by 10 will give you the required quantity.
For bags of cement you will need approximately 1 bag of cement to set 50 blocks
For sand you will need a trip of 20ton sand to set 1500 blocks.

Fun in what sense?
I designed a fence using my parameters and i arrived at an estimate.
I did an example with a survey plan i believe that should suffice for what you need to make your projection.

essenceplus:
is the data meant for fun ?

You can use data provided to make a projection.
Cheers

sexy74:
Nice one, I will appreciate if you could talk about fencing a compound of about 550sq meters, block wrk and cement required

You can use data provided to make a projection.
Cheers

essenceplus:
Can you help me in making this projection?

Cost of fencing


1. 3 plots


2. 1 Acre


3. 2 Acres

Example:
From the design plan shown, the total perimeter of the site is = 29.4+13.7+26+13.2= 82.3m
The cost of fencing the plot will then be
82.3 x ₦26,158 = ₦2,152,803.

based on the height of the proposed fence, as well as the type of foundation to be used the rate (₦26,158) will vary i.e be more or less

Usually on most of our private lands we only do the substructure and superstructure to secure the land. Finishing only comes into play when we move in, as such i will leave this calculation at this level.

In summary to arrive at an estimate of what it would cost you to build a fence around the perimeter of land you can use this estimate.
First measure out the perimeter of the land in metres, then multiply by the cost calculated above.
From my calculation s above a fence based on my designed example will cost ₦26,158 per m² to build.

Superstructure
Block wall
Area for blockwall = 2.5 x 10 = 25m2
In 25m2 of wall there is approximately 225pieces of blocks each costing ₦240
Total cost of blocks = ₦54,000
Bags of cement required for setting 225 pieces of blocks is 5 bags, each costing ₦2,600
Total cost of cement =₦13,000
3tons of sand is required to set 225 pieces of blocks
20tons of sand cost ₦50,000 there required sand will cost ₦7,500
Cost of blocksetting for 10m of fence is ₦74,500
Cost of same for 1meter is ₦7,450

Columns
There are 4 columns in my designed length
Concrete in 4 column = 0.53m3
Reinforcement in column = 80 x 0.53 = 42.4kg
Formwork to sides of column, each column needs 2 planks, total of 8planks required at ₦1500 each, labour with other materials should be around ₦640
Cost for columns
Concrete = 0.53 x ₦32,000 = ₦16,960
Reinforcement = 42.4 x ₦260 = ₦11,024
Formwork = 8 x ₦2,100 =₦16,800
Total is ₦44,784 for 10m
1 metre of fence will cost ₦4,478 in columns

Summary
The superstructure of the fence block setting and columns only will cost ₦11,928 per metre

Foundation
The drawing below is a section through the foundation of the fence.

Cost of excavation
This can be calculated using the length of the fence or the volume of excavation
If length is 10m then cost at N500 per m assuming the earth is not hard makes it N5,000
Using volume which is 0.6 x 0.7 x 10m = 4.2m3
Cost of excavation at ₦1,200/m3 = ₦5,040

Cost of blinding and inverted T-concret beam
Volume of concrete blinding = 0.7 x 0.05 x 10m = 0.35m3
Concrete in inverted T-beam = (0.1 x 0.7 x 10m)+(0.4 x 0.23 x 10m) = 1.62m3
Total concrete in foundation = 1.62 + 0.35 = 1.97m3 approximately 2m3
Cost of 1m3 of concrete based on data = ₦32,000/m3
Cost = 32,000 x 2 = ₦64,000

Cost of reinforcement
Since the reinforcement is not much i will use a factor of 80kg per m3 of concrete. In this case 1.62m3 of concrete will give 130kg of reinforcement
1000kg cost ₦230,000 to buy,
Ironbender will collect ₦20,000 for every 1000kg
And he will use approximately N10,000 worth of binding wire. Adding all up we have ₦260,000/1000kg
So 130kg will cost me ₦33,800

Cost of formwork
Total of 13 nr 1 x 12 planks required at ₦1,500 each; = ₦18,000
Total of 30 nr of 2 x 4 planks at ₦500 each; = ₦15,000
Nails of ₦1,500 required
Carpenter will collect ₦500/m² ; = ₦5,000
Total on formwork = ₦39,500 for 10 metres

Summary
Cost of 10meter foundation = N142,300
Therefore 1meter foundation = N14,230