segzy14:


I paid by the number of blocks supplied at N60/block.
For instance, if I supply 1000blocks that is 1000x60= N60,000

Ok sir... Thanks

segzy14:

8.Blockwork in superstructure
a. 27 of cement@2650 = 71,550
b. 3 tonnes of sharpsand@3000= 9,000
c. 1342nos of 9inches blocks@200=268,400
d. Labour. = 70,000
Total. =N418,950

How many builders and service did you use sir, and did you pay per number of blocks laid?

Dominionng:


N200 and N300 for Internal and External screeding respectively(Labour only)
Glova paint is N3,000 - N3,500 depending on your location.

Thank you very much sir

Good evening house... Please I need the cost of screeding per metre square (labour) and cost of screeding paint. Thank you

michlins:
is a must that they will be foreign doors. If you can give us a trial,we can make it work for you

This is great, lovely design. Are they suited for main security or rooms? How much does the 3 and 4ft cost?

rotecch77:


Thanks for your time and comment here.
Kindly use another phone or lappy to view the thread/ the pics bcs I don’t see where cement is wasted here.
If you have time you can come to the site to view quality work as its been done, who knows you can still give us In future
Thanks once again

Mr. Rotecch I like your work, very neat. More grease sir.

uprof:
we need to start by reprogramming your mind for financial education

Robert Kiyosaki's assistant

rotecch77:
I visited this house again for about 2yrs after we did the remodeling

Walahi! You did miracle on this... Lovely work.

Wonderful... I love the transformation

Happy Sunday nairalanders, I have a question o... How many bags of cement can a 10tons (1 trip) of sand mould?
Thanks.

rotecch77:


Sorry but why don’t you feel comfortable with your builder (a professional) haaa, unless may be he is not what you called him.

Lol... Well I'm not an expert, but I see most buildings here with 9". I felt 6 would be the minimum recommended. If there's no problem using 5, it's alright... Since there are columns.

Person2person:




I assume you have not done your oversite concrete (DPC)yet.....

ensure your columns are not too far apart (you may need to introduce column to support the 5inch block)

ensure your columns is 6inch as you can still correct that now

do your oversite concrete (DPC) (very important) with proper mix

you can continue your work with 6inch block


Good Luck

Thank you very much. I've not done the oversite concrete yet, I was thinking of flooring it later. The builder said there's no problem with 5in, but I don't feel comfortable.

Person2person:


Roughly 1100 blocks for the four courses, but I will advice you make it 6 courses so 2 blocks will be below and 4above the ground level....in this case, roughly 1650 blocks

GoodLuck

I discovered recently that blocks being used on my site is 5inc, instead of 6inch. The building is at 4 course dpc level, with starter column.
Can I continue from dpc with 6in block? Will there be any effect?

I am currently working on a 4 bedroom bungalow already at the dpc level, with filling. I'm thinking of incorporating columns at the corners in case of concrete fascia, I don't know if it can be done. Please help. Thank you.

chimexdnice:
most of these so called "contractors" you mentioning are greedy. .. it's difficult getting a genuine one (except you a money bag or a politician) ... if not... appoint a "professional experience contractor" but don't make the mistake of handing over the entire finance of the project to them ... manage your finances yourself (buy your materials yourself) and pay the "professional contractor"an agreed wage
that way you in control of your project and everyone is happy ... talking from experience.

I'm currently working on a 4 bedroom bungalow at the dpc stage, already filled. Now I'm thinking of incorporating columns at the corners. Can it be done? Thank you.

Nice one sir... It's amazing how you achieved so much with that budget. I guess most times we just stuff our buildings with unnecessary features that end up costing alot. I'm inspired.