davodyguy:
Qsat is modem discriminating. I use a modem with M card slot and it works with a'll networks

If your DEVICE is not still connecting to THE
server follow this step............................

Step 1
On your device go to menu setting Ethernet
config auto link unmark it.......


step2
Off your device and on it ...
Now go back to same process auto link mark it then press your blue button to link


step3
now go back to your XCAM Avatacamhd active code off/on to ON 0000000000 ok input this code 4725131513 ok it and press your red button your device will reboot


Step4
Now go back same process to mark your auto link and press ur blue button then go to your xcam do not input the code given up above just press your red button to activate (Done)

dimdim001:




Code 45 working

HAH:
@ davodyguy this azsky is it a decoder like qsat or just a device fixed to another decoder like A+

simplysucre:
My device didn't reboot when I pressed d red button

davodyguy:
the facts
1) if your Qsat isn't showing for over 2 or more days, it's server problem. No solution is guaranteed except by luck
2) Temporary solution is to upgrade but upgrade is not a guarantee for it to work. it may work or may not
3) Esat and Qsat now hardly work with direct SIM plug and play. direct SIM shuts down the decoders. Solution : use WiFi adapter like Dlink, modem and lan cable. Qsat is also selective of WiFi adapter and modem. I use Dlink adapter and universal modem Huawei E173
4) to use modem you dont need Nigeria. Just click on Auto link and connect
5) Watching paytv with decoders other than theirs is black market and would never last. Solution now is 'scam' account or Azsky
Any questions outside the above 5 possible solutions will amount to frivolity

simplysucre:
My device didn't reboot when I pressed d red button

davodyguy:
yes

HAH:


Yes what ? I asked if it is stand alone decoder or dependent on strong like A+,

HAH:


Yes what ? I asked if it is stand alone decoder or dependent on strong like A+,

EMMAACHILE:

Azsky is a dongle that depends on a full decoder before it works well. It's similar to A+

HAH:


Thank you, can I attached it to my Qsat ?

EMMAACHILE:

Not advisable because some reports of freezing when used in Qsat.

wealth014:
so on which decoder do you advice it should be used on for best result?

Malix:
if u need Azsky,Azsky acct,Sat 5, etc. contact me

EMMAACHILE:

Not advisable because some reports of freezing when used in Qsat.

EMMAACHILE:

Strong 4922, 4922a, 4669, 4663 and Esat decoder

Update
Reported working well on qsat. See here for more http://www.lemmymorgan.com/how-to-connect-azsky-dongles-to-qsat-q13g-q23g-speed-hd-s1/

wealth014:
Thanks bro its understood,but where can I get that cable in Port Harcourt? Cause Im thinking of getting one of that Azsky. .

davodyguy:
Hi oga

Are you still having fun on the west in France? if so kindly help out. Speed is dead. I prefer to go to France as the most reliable back up

EMMAACHILE:

What model are you using?

HAH:


Yes what ? I asked if it is stand alone decoder or dependent on strong like A+,

omokoaustine:
after using flashtool on one azsky it refused to blink
update , just restarting and restarting . d funniest tin
is dat i used same flashtool for other azsky and dey
are working fine. wat could b d solution @ everyone i
appreciate your response. thanks