formwork for the column and lintel going on

casting of the columns and lintel coming soon next

casting of the columns going onpics coming soon

almost done with the columns casting

more

update on the casted columns.....pics

update..lintel done

thanks for your our comments and views.
Final level of ground floor done,next stage is the preparation for the slab.
Our sittingroom window measurement is 1600x900
while room window is 1200x1200
Toilet windows 600x600

More coming

08066619493

We resumed back here just few days ago.
Slab formwork in progress

Work is in progress gradually by gradually

Work still in progress

Work still in progress here

More coming

Pics update coming soon

Update

Watch out for more update

More

Work still in progress but in snail speed due to the lockdown.

Slab reinforcement setting in progress
16mm for the beams and 10mm for the stirrups with 200mm c/c , 12 mm for the main bar and distribution bars for the slab .

Work is in progress

Work is in progress gradually by gradually

More pics

Almost done with the slab reinforcement set up

rotecch77:
Almost done with the slab reinforcement set up

Well done Boss, Y no water proof btw ribar and wood? or client cant be bothered? frm my own xpirience this prevents the cement staart frm xcaping ohh
Good and neat job so far frm day one kudos, we dey follow jeje!

erico2k2:

Well done Boss, Y no water proof btw ribar and wood? or client cant be bothered? frm my own xpirience this prevents the cement staart frm xcaping ohh
Good and neat job so far frm day one kudos, we dey follow jeje!

Longest time big Boss.

The introduction of water proof is newly adopted system for slab formwork( for normal plank type only) the system is not bad to have such to safe guard the water from the concrete.
Actually we wish to use it here to but we couldn’t get it due to the lockdown.
But we try as much as possible to see that all our plank edges are well joined plus additional aluminum sheet cover to seal the wider opened area.
More so we will make sure that our water cement ratio is standard (0.4)
Check the pics below to see how we do the formwork edges and the aluminum sheet cover for the little opened area on the plank.

Thanks so much for your time here sir

rotecch77:


Longest time big Boss.

The introduction of water proof is newly adopted system for slab formwork( for normal plank type only) the system is not bad to have such to safe guard the water from the concrete.
Actually we wish to use it here to but we couldn’t get it due to the lockdown.
But we try as much as possible to see that all our plank edges are well joined plus additional aluminum sheet cover to seal the wider opened area.
More so we will make sure that our water cement ratio is standard (0.4)
Check the pics below to see how we do the formwork edges and the aluminum sheet cover for the little opened area on the plank.

Thanks so much for your time here sir

Oyes this is true I forgot about the lockdown, well done for the improvision. Right about this time, I can just imagine the cost of 16 and 12mms

erico2k2:

Oyes this is true I forgot about the lockdown, well done for the improvision. Right about this time, I can just imagine the cost of 16 and 12mms

I bought 12mm at the rate of 235,000
16mm 240,000

rotecch77:


I bought 12mm at the rate of 235,000
16mm 240,000

That aint too bad

Happy beginning of Ramadan fasting to all our esteemed Muslim clients and followers of our thread.

Final laps of the slab work before casting done
Electrical work, mechanical work.
Here we used the best materials for both the 2work.

All imported plumbing fitting couple with very thick pipe for the waste.

Original dignity pipe for the electrical piping work
A bundle cost 7000 against the regular one of 2500 per bundle.

Casting of the slab done
This stage only cost about 2.9m
Both materials and labour