| How 2 Turn UPS into INVERTER by MrTony34: 1:42am On Jan 29, 2020 |
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what the ups can do apart from the short time back it does. Due to its good functionality and features many inverter nowadays have ups mode selefftionode you can switch on between to prevent interruption of power during power failure. UPS has has some features and merit over sachet inverters. 1. It regulates voltage during fluctuation 2. It provides quality power to load 3. It provides constant voltage 4 it serves as isolation btw mains and load How to turn it into inverter for use Step 1 Unscrew the ups casing Step2 Locate the internal connected battery(ies) and disconnect them from their cable Step3 Those two wires of black and red are your positive and negative . Strip the insulations and join a cable on them to extend the length Step 5 Tape the jointed point and pass them outside of the ups casing Step 6 Get any inverter battery of your choice of 45ah,75ah, 100ah, 200ah and connect the wires to the battery terminals respectively Step 7 Get a battery charger of 12v to charge the battery Step 8 Check the picture below for proper understanding or request for video on my whatsapp ...note: full video is 2k. Benefit: try it at home and you will definitely enjoy it. It is very cost effective and economical. Reduces cost of fuel. Solar panel can be added to it if you desire especially those who are in an area where is no supply of electricity.....( this set can power tv, charge phones, decoder, small fan,) Pls note: 650va ups can only carry max. Of load 400w while 1.5kva with max load of 800w.. use led bulbs only Call/ whatsapp for any info. , TONYTEQUE SERVICES LTD ( RC in Nig.) We specialized in Sales, Repair and expert installation of INVERTER || SOLAR || SOLAR STREET LIGHT || SOLAR WATER PUMP || CCTV || ELECTRICAL BUILDING WIRING & SOLAR ENERGY CONSULTANT CALL AN EXPERT TODAY WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7 ALSO CHECK: HOW TO CALCULATE THE NUMBER OF SOLAR PANEL THAT CAN CHARGE YOUR NUMBER OF BATTERIES. https://www.nairaland.com/6132013/how-calculate-number-solar-panel 1 Share 
|
| Re: How 2 Turn UPS into INVERTER by wisdomhuz: 5:09am On Jan 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what the ups can do apart from the short time back it does.
Due to its good functionality and features many inverter nowadays have ups mode selefftionode you can switch on between to prevent interruption of power during power failure.
UPS has has some features and merit over sachet inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
How to turn it into inverter for use
Step 1
Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect them
Step3
Those two wires of black and red are your positive and negative . Strip the insulations
Step 5
Get a flex wire of black and red and connect them together and tape it
Step 6
Get any inverter battery of your choice of 45ah,75ah, 100ah, 200ah as u can afford and connect them on it and tighten well
Step 7
Get a battery charger plugged on wall socket to charge the battery
Step 8
Below is a picture of mine
This can save you cost instead of buying inverter of high cost . It is cheap and affordable
Suitable for a room , self contained , mini flat and 2bedroom flat. Is what use too.
Total of this cannot cost you more 40k, 50k, 60k,70k depending your battery choice.
Tonytech services
Providing you quality services at all time
Our services include
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Please what's the difference between the 45ah, 75ah, 100ah and 200ah batteries, Is it the capacity of things they can carry? Please shade more light on this. Thanks 1 Like |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 9:37am On Jan 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 We serve u better |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 9:42am On Jan 29, 2020 |
wisdomhuz:
Please what's the difference between the 45ah, 75ah, 100ah and 200ah batteries, Is it the capacity of things they can carry? Please shade more light on this.
Thanks Capacity of battery depends on hours or duration the battery will back on any connected load ...the lesser the load the longer the time ...the bigger the capacity of the battery the longer the more time back vice versa |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 12:12pm On Jan 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 5:43pm On Jan 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Quality is our pride |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 8:25am On Jan 30, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 12:34pm On Feb 01, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 8:21am On Feb 03, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Promo is on |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 12:48pm On Feb 05, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Tonytech services ltd |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 6:42am On Feb 06, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Tonytech services |
| Re: How 2 Turn UPS into INVERTER by Ameboperoo(m): 4:14pm On Feb 06, 2020 |
How does the charger know when to stop charging?
How can you connect solar panels,/charge controller to charge the battery with solar? |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 6:21pm On Feb 06, 2020 |
Ameboperoo:
How does the charger know when to stop charging?
How can you connect solar panels,/charge controller to charge the battery with solar? Is an intelligent charger. Panel charges the battery through the sun. |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 8:56am On Feb 07, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 9:30am On Feb 08, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Tonytech services |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 2:00pm On Feb 14, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Your reliable power solution |
| Re: How 2 Turn UPS into INVERTER by Juliana7: 4:30pm On Feb 14, 2020 |
@op, pls sir when there is rain althrough d day and no sun how do one charge d inverter with solar panel. Pls forgive my ignorance. Thanks |
| Re: How 2 Turn UPS into INVERTER by unicmarket: 10:27pm On Feb 14, 2020 |
Juliana7:
@op, pls sir when there is rain althrough d day and no sun how do one charge d inverter with solar panel. Pls forgive my ignorance. Thanks Good evening ma Juliana, I think it’s ok to ask when we don’t have some enlightenment about a matter, and this is exactly what you have done; I celebrate you, To your question; now depending on the solar power and it’s reception to light; solar panels need light to power on and charge batteries, as much as there is enough light from sun to still make us say this is day not night, solar panels generates power But during rainy season, the solar panels will only produce lower power, since the light from the sun is low, so as much sunlight more power generation, low sunlight lower power generation. When there is no sunlight at all then no power generation from your solar panels. I hope this answered your question, and if not please clarify. Thanks Jekitech; we love to be part of your Power Story See signature for details to contact us Sales| Support| Installations |maintenance 
|
| Re: How 2 Turn UPS into INVERTER by MrTony34: 7:36am On Feb 15, 2020 |
Juliana7:
@op, pls sir when there is rain althrough d day and no sun how do one charge d inverter with solar panel. Pls forgive my ignorance. Thanks in every advantage there is disadvantage. Therefore Either at sunshine or rainfall panel charges the battery the only ptoblem is that the intensity of the charge will be v very poor at rainfall. Therefore the battery cannot get required sufficient charge before the end of the day. |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 3:10pm On Feb 23, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 The experts in solar system |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 11:38am On Feb 25, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Quality is assured |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 6:39am On Mar 21, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Call us |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 10:04am On Mar 22, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Thank u |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 7:55pm On Mar 22, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Call d expert |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 6:25pm On Mar 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Thanks |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 11:02am On Apr 03, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Our best is what we give u |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 1:03pm On Apr 08, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Stay safe |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 5:03pm On Apr 25, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Try us today |
| Re: How 2 Turn UPS into INVERTER by castins(m): 6:57am On Apr 26, 2020 |
Your location please, I currently use a UPS of 650ah. How do I go about connecting an inverter battery to it? how much is the inverter battery? MrTony34:
Promo is on |
| Re: How 2 Turn UPS into INVERTER by Ken4agent(m): 3:43pm On Apr 26, 2020 |
Does it mean the ups will perform the function of the inverter machine which suppose to be connected to the Barrie's for charging?? |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 11:28pm On Apr 26, 2020 |
Ken4agent:
Does it mean the ups will perform the function of the inverter machine which suppose to be connected to the Barrie's for charging?? Yes |
| Re: How 2 Turn UPS into INVERTER by MrTony34: 2:49pm On Apr 29, 2020 |
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Thank u |
