ben1daEbiri:
I want to be clearified about this mytv card pairing issue:I paired a yellow card to my 4922 but I'm using the card on 4669x;can I still pair another yellow card to the same 4922?

...

Spy360:

I have already done so but the signal still jumps between 50 and 75%. So guru tell me something else.

Exactly, that was what mine was doing.

Chriswazo:

Boss i did it o but the channels didn't open, i deleted them and blindscanned, the joy tv and Co didn't appear, though Rave tv and Co appeared, the are still not opening. Someone suggest that i do a re-track while another of my friend suggest that i change the lnb. This will be the 3rd time i am paying for a re-track, after a while, it will start cracking again which will later result to no signal. Max tv works perfect. I also noticed now that the Joy tv before I deleted it had signal of 93 whereas others have 97. What could be the cause?

which receiver are you using?Do you have 16E in your combination?what T.P did you use for scanning your 16E?

babardos1985:
hello gurus in the house, pls, I want to ask if Qsat13g is still existing? I have abandon my own now over 2 years now. I can only watch CCTVN, CCTVF, CCTVD only, I need help from gurus in the house , what to do, even if its FTA I can manage to watch.

yes

ben1daEbiri:
which receiver are you using?Do you have 16E in your combination?what T.P did you use for scanning your 16E?

No, I don't have 16E yet, am using strong 4922.

Chriswazo:


No, I don't have 16E yet, am using strong 4922.

Do an SCC and track with the Multitv with a new sat,skew @8 O'clock and see if it still freezes!

ben1daEbiri:
Do an SCC and track with the Multitv with a new sat,skew @8 O'clock and see if it still freezes!

OK,i will. what's SCC sir?

Chinedu7:

If you are sure that the diseq is OK then follow this steps. 1st delete all the channels from Astra. 2nd check the diseq number you gave to Astra, after noting the number, scan through the Sat list to make sure you didn't use the same number on another Sat for 28e. Reason: if you have scanned Astra 28e through different SATs, they will clash, at times you will get no signal or unsteady signal. After doing all that trouble shooting, blindscan again but in this kind of case, it's mostly a fault of diseq or the output cable that runs from diseq to decoder. You can consider running a fresh cable if you have one.

@ Chinedu7,
I have checked the Sats lists and discovered that I has assigned some diseq numbers to Badr 26e and 36e before.
I off them and deleted all the channels as well as the TPs in all these Sats that I tracked before I.e
Badr 26e, 36e, and even the 3 Sats I combined together in the diseq.
11595 V 30000 didn't pop up.
Note: I have MultiTv, 16e and MyTV on this diseq and I use 4922 decoder with patch 1.97
What else is still wrong or I can do?

lincolnola:


@ Chinedu7,
I have checked the Sats lists and discovered that I has assigned some diseq numbers to Badr 26e and 36e before.
I off them and deleted all the channels as well as the TPs in all these Sats that I tracked before I.e
Badr 26e, 36e, and even the 3 Sats I combined together in the diseq.
11595 V 30000 didn't pop up.
Note: I have MultiTv, 16e and MyTV on this diseq and I use 4922 decoder with patch 1.97
What else is still wrong or I can do?

Try and run your cable direct, bypassing the diseq, if the Tp 11595v 30000 comes out then the diseq is faulty, change the diseq but if it doesn't come out, try another cable direct and see if it will work. It could be the input cable.

Chinedu7:

Try and run your cable direct, bypassing the diseq, if the Tp 11595v 30000 comes out then the diseq is faulty, change the diseq but if it doesn't come out, try another cable direct and see if it will work. It could be the input cable.

Okay Boss,
I will do just that when light comes back, but am not really sure if the fault is from the diseq as it is working for the 3 Sats I combined just that some TPs are not green at all

lincolnola:


Okay Boss,
I will do just that when light comes back, but am not really sure if the fault is from the diseq as it is working for the 3 Sats I combined just that some TPs are not green at all

Diseq is more than capable of doing that, you will be amazed.

Chriswazo:

OK,i will. what's SCC sir?

SCC is short for single cable connection

Chinedu7:

Diseq is more than capable of doing that, you will be amazed.

That happened to me a few times,sometimes some polarisations wouldn't even turn green!

ben1daEbiri:
SCC is short for single cable connection

ben1daEbiri:
That happened to me a few times,sometimes some polarisations wouldn't even turn green!

ben1daEbiri:
SCC is short for single cable connection

okay sir, i am suspecting that too, i will try it tomorrow.

After trying 2 pair my Srt 4922A wt my yellow ftv card, all i c is invalid inputs, and in fact i check all the enteries are correct 2 d best of my understanding, pls what can i do?

Anyone who needs vinsat extracted autoroll software should drop his/her email address here.

Sayaya245:
After trying 2 pair my Srt 4922A wt my yellow ftv card, all i c is invalid inputs, and in fact i check all the enteries are correct 2 d best of my understanding, pls what can i do?

Drop the details in my email let me help you ify4king@yahoo.com

Sayaya245:
After trying 2 pair my Srt 4922A wt my yellow ftv card, all i c is invalid inputs, and in fact i check all the enteries are correct 2 d best of my understanding, pls what can i do?

pls my Oga's in d house,what can make a 4950H decoder worked perfectly wit auto roll softwear stops workin suddenly n weneva I on it,all what I got is scrambled channel,pls what can I do?..or I shld giv it d softwear again..._ur responds is highly needed!

ify4king:
Anyone who needs vinsat extracted autoroll software should drop his/her email address here.

graphicicon8@gmail.com

Can't wait to see the latest version of software for strong SRT4922A

lincolnola:


Okay Boss,
I will do just that when light comes back, but am not really sure if the fault is from the diseq as it is working for the 3 Sats I combined just that some TPs are not green at all

@lincolnola, as long as ur old mytv channels are working especially TP 12.722 H 26.657, thats means ur cable and diseqc swith are perfectly ok, the lnbf is the fault, and i think u are using startime black lnbf, cos using the mention lnbf this TP 11.595 V 30.000 will never turn green, try and use strong short neck lnbf and give testimony to the house, thanks

baggiosne:
pls my Oga's in d house,what can make a 4950H decoder worked perfectly wit auto roll softwear stops workin suddenly n weneva I on it,all what I got is scrambled channel,pls what can I do?..or I shld giv it d softwear again..._ur responds is highly needed!

pls mk unna help naw

baggiosne:
pls my Oga's in d house,what can make a 4950H decoder worked perfectly wit auto roll softwear stops workin suddenly n weneva I on it,all what I got is scrambled channel,pls what can I do?..or I shld giv it d softwear again..._ur responds is highly needed!

Yes reload d software

graphicicon:
graphicicon8@gmail.com

sent!

ify4king:
Yes reload d software

tank u

Sayaya245:
After trying 2 pair my Srt 4922A wt my yellow ftv card, all i c is invalid inputs, and in fact i check all the enteries are correct 2 d best of my understanding, pls what can i do?

they are not properly inputed recheck and do it properly.

Please folk how much can I get a good FTA (showing Nollywood, News and Sports channels).

Dish + Decoder + any other equipment.

It's urgent please.

graphicicon:
@lincolnola, as long as ur old mytv channels are working especially TP 12.722 H 26.657, thats means ur cable and diseqc swith are perfectly ok, the lnbf is the fault, and i think u are using startime black lnbf, cos using the mention lnbf this TP 11.595 V 30.000 will never turn green, try and use strong short neck lnbf and give testimony to the house, thanks

@ Graphicicon
Thanks for your response.
All my lnbs are strong types. I used the old long strong Lnb for 16e, the new short HD strong for MultiTv and the old Long strong Lnb for MyTV.

ify4king:
Anyone who needs vinsat extracted autoroll software should drop his/her email address here.

balakailayana@gmail.com

abdool09:

sorry for the late reply, let me measure and wil get bck to you..,...........
its 14.5 inches/ 37.5 cm.

Sorry for coming late! For those that need the calculation here i come! From your previous information the dish size is 2.4m (240cm) and the depth is 37.5cm. Looking at my diagram (fig.1 and fig.2), from parabola calculation, X= r*r/4F
where X is the depth of the dish,
r is the radius = 240/2 =120cm
F is the focal length.
substituting in the formula,
37.5=120*120/4F, 37.5*4F=14400, 150F=14400
F=14400/150, F=96cm
From Pythagoras,
Hypotenuse (H) square = Opposite (f) square + Adjacent (r) square
i.e, H*H = f*f + r*r, where f = F-X
f = 96-37.5 = 58.5
H^2 = 58.5*58.5 + 120*120,
= 3422.25 +14400
H^2 = 17822.25
H = Square root of 17822.25
H = 133.5cm. This is assume length of tripod.
but looking at the second diagram, to be continue....

bk2bauchi:
balakailayana@gmail.com

Done!