PLS MY SRT 4922A OF AND ON ITSELF WHEN INSERTIN SIGNAL CABLE IN PLS WHAT MAY BE D PRBLM

House,
Pls,apart from Iso 68.5e,what other sat can old 4663x be used for?
Thnx 4 response

Christgalaxy:

you can get sd channels on 5e and 7w

Can 4663x track 7e?

Murtad:
PLS MY SRT 4922A OF AND ON ITSELF WHEN INSERTIN SIGNAL CABLE IN PLS WHAT MAY BE D PRBLM

Suspect: Bridging of wire on the coaxial cable (check your connections at the F-connector) or faulty LNB. Suggestion: Remake your connections, change the coaxial cable or replace the LNB. Good luck

zoboizee:

That's not gonna be possible. I will be shocked if he has up 70% self with this wet weather. He needs big dish for that.

ok, thanks

lincolnola:
House,
Pls,apart from Iso 68.5e,what other sat can old 4663x be used for?
Thnx 4 response



Can 4663x track 7e?

Capital Yes.

With this setup I believe I would use two dishes and 7 lnbs

Christgalaxy:

yes you can,make 16e ur primary,add 28e 3inch away from 16e,now add 42e five inch away to get it.you can attach 5e below 16e .use a separate dish for 7e for ur 24hrs Nigeria nollywood movies,suppose you have 8 in disecswitch to make it work,but if uve got 4 in one switch then select the best four satellite you love.

Goodday House.Pls help,My 4922A is showing insufficient memory whenever i want to blindscan it'll not blindscan.What do you advise i do
to clear it?

eerekake:
Goodday House.Pls help,My 4922A is showing insufficient memory whenever i want to blindscan it'll not blindscan.What do you advise i do
to clear it? .

Do a factory reset, and rescan your decoder.

Ismy5000:


The picture is for 9e as primary,
Follow by 16e
And follow by 28e the tallest

Where did you get this kind of bracket for thé lnbs of jour Setup?

Murtad:
PLS MY SRT 4922A OF AND ON ITSELF WHEN INSERTIN SIGNAL CABLE IN PLS WHAT MAY BE D PRBLM

Switch off any decoder before inserting coaxial cable. Available for all decoder not 4922A only.

eerekake:
Goodday House.Pls help,My 4922A is showing insufficient memory whenever i want to blindscan it'll not blindscan.What do you advise i do
to clear it?

Do factory reset and reprogramme ur channels.lobatan.

Please, someone can tell me if SRT 4950h is able to read any smart card like my TV Card?

eerekake:
Capital Yes.

@ eerekake
You mean i can watch FTA channels on 7e and 5e with srt 4663x?

Freshclean777:
Please, someone can tell me if SRT 4950h is able to read any smart card like my TV Card?

Capital NOoooooooooooo

Ismy5000:


The picture is for 9e as primary,
Follow by 16e
And follow by 28e the tallest

I need this Multi LNB holder. How did you get yours?

eerekake:
Goodday House.Pls help,My 4922A is showing insufficient memory whenever i want to blindscan it'll not blindscan.What do you advise i do
to clear it?

If you don't want to lose anything if you do factory reset. Then look for stale sat you are not using, delete tps, you can also delete few unused tps from other sats, you will be fine.

Murtad:
PLS MY SRT 4922A OF AND ON ITSELF WHEN INSERTIN SIGNAL CABLE IN PLS WHAT MAY BE D PRBLM

Run another cable direct with new lnb without diseq, if it does the same thing then you receiver has been visited by Mr Thunder but if it stops then check cable, diseq or lnb for fault.

Pls guys, I'm in need of Qsat 11g remote control. I reside in KEBBI. Pls any one close by shud notify. Its urgent. Tnks

sunene1:
Capital NOoooooooooooo

Thanks

Unseen:


I need this Multi LNB holder. How did you get yours?

Me too

ludakristos:

ludakristos@gmail.com. Thanks alot

you ve got mail

Thanks alot for all the help so far. I have been able to track nilesat, astra2f, and mytv on 3 dishes, now the major challenge I'm having is looping out the signal to another decoder(which is a bit distant from the primary decoder), when I used a very short coaxial cable cut-out to test it work very well when I tuned the secondary decoder to the same satellite channels but loses alot of signal quality when I tune to a different satellite channel. And then there is absolutely no signal when I take the secondary decoder to the location it's meant to be. Please help me out

2stv will air real Madrid vs man u tonight.tp 10804h30000@16e

Dr3dd:
Thanks alot for all the help so far. I have been able to track nilesat, astra2f, and mytv on 3 dishes, now the major challenge I'm having is looping out the signal to another decoder(which is a bit distant from the primary decoder), when I used a very short coaxial cable cut-out to test it work very well when I tuned the secondary decoder to the same satellite channels but loses alot of signal quality when I tune to a different satellite channel. And then there is absolutely no signal when I take the secondary decoder to the location it's meant to be. Please help me out

You need to understand the principle of operations in Loop in/out...

The secondary decoder has to be tuned to the same Channel within the same Tp/frequency,
You can't tune the primary to a different Tp and tune the secondary to another channel not having the same frequency/Tp, it doesn't work dat way.

Check ur cable connection and ensure tight/firm contact at d F-connector on both decoders...

lincolnola:


@ eerekake
You mean i can watch FTA channels on 7e and 5e with srt 4663x?

Sorry,i thought is 7w.You can't watch 7e and 5e with mpeg 2 decoder.

Chinedu7:

If you don't want to lose anything if you do factory reset. Then look for stale sat you are not using, delete tps, you can also delete few unused tps from other sats, you will be fine.

Thank you is working perfectly.

engrjosefz:


You need to understand the principle of operations in Loop in/out...

The secondary decoder has to be tuned to the same Channel within the same Tp/frequency,
You can't tune the primary to a different Tp and tune the secondary to another channel not having the same frequency/Tp, it doesn't work dat way.

Check ur cable connection and ensure tight/firm contact at d F-connector on both decoders...

....
No...it works this way, the loop in decoder have to manage same polarization(H or V) supplied from the loop out decoder, ... as it does not matter if you are on a different frequency or transponder cos the decoder won't notice any change in Tp/frequency...as long as they both use same satellite and pol from any frequency/channel from the loop out decoder cos the transmission only deals on current 13v or 18v(V or H)example ..tune loop out decoder to Tp 12322V and tune loop in decoder to 11766V works well otherwise tunning to 11785H will switch off loop in receiver...

Deluxe8000:
Any talented guru around shomolu onipan yaba area?

Call this number. 08056555569 he stays around your area. Or you can drop your number to contact you

Akinige:


pls bro how can sumone get those rod joined lnbf?

Where is your location?

Unseen:


I need this Multi LNB holder. How did you get yours?

Very much available In Lagos

friends pls is it possible to watch gotv decoder on laptop pls i really need answer to this