@Ogojohn.Lol. Well said.

blexxonmak:
@Ogojohn.Lol. Well said.

yes but i think you are forgetting palms 1:1

Ogojohn:
One great attribute of an elephant is its memory. No one is undermining you but it seems to me that yours memory is too short. When you talk so much. You will soon forget most of what you said. As for me. One of the great classics of JAMES HADLEY CHASE was THE VULTURE IS A PATIENT BIRD. So my brother i am not undermining any of your effort. I am just an observer to your IKOLO dance and new dance step.

well i never said you were the one undermining me,but as for your ikolo dance i think mark 14:29-31 will do

blexxonmak:
@mtchris.I have not checked but it should.Downgrade and get back to me.

A'ight sure...

I bought 110cm Eurostar offset dish @ N9,500 4 a client in Ondo State.I really suffered b4 I cld get this dish @ Osha.

flashyberry:
hmm boss! Mind explaining Is the rays bouncing back to the 90cm dish or so... Little bit perplex! Nyc configuration nd setup there!

....actually how it works: the 90cm dish receives a signal from a particular satellite then reflects it to the subreflector..and from sub reflector to the lnb! Making the signal more concentrated @ the sub reflector ..as double reflector dish!..

As you can see from below diagram ..how I used a flat circular surface from a 1.8m pan dish..as sub reflector to lock CCTV China on eutelsat@36east 12034V27500!with Ws-6906 sat metre!.on dstv position..this is an experimental double antenna reflector setup..in this case the lnb is not looking at main antenna!but at reversed position..pointing to the subreflector..the main purpose of a subreflector!if set up properly!is to improve overall efficiency of the main reflector!

Cheers

blexxonmak:
The question is how many of us are using 4930L.I mean why would I waste my time and money on 4930L when there are far better Linux boxes like Dreambox,Vu + (with quad core processor),etc,out there.

Meaning that receiver has no good recommendation? Well that yah Dreambox, i will need detail on it features and how it can satisfy my FTA needs.
Thanks Blessonmak.

Morng fellow members, I want to nail amos5 c-band. Pls can someone help me wit the tracking tp? Thanks

@abdool09. Oromiyaa TV tp => 3626 R (DVB-S MPEG-2) 2000-3/4

abdool09:
Morng fellow members, I want to nail amos5 c-band. Pls can someone help me wit the tracking tp? Thanks

blexxonmak:
@abdool09. Oromiyaa TV tp => 3626 R (DVB-S MPEG-2) 2000-3/4

Thank u senior man!

@olushaggy. Look here: www.dream-multimedia-tv.de/en/products Buben has a very clean DM 800 HD se for sale @ 35k.

olushaggy:

Meaning that receiver has no good recommendation? Well that yah Dreambox, i will need detail on it features and how it can satisfy my FTA needs.
Thanks Blessonmak.

olushaggy:

Meaning that receiver has no good recommendation? Well that yah Dreambox, i will need detail on it features and how it can satisfy my FTA needs

linux boxes are for profs!Well if you can't handle linux or enigma2 boxes!..better stay away from them!most of it's supports!will be for Europe!excluding Africa!hahahaha

blexxonmak:
@olushaggy. Look here: www.dream-multimedia-tv.de/en/products Buben has a very clean DM 800 HD se for sale @ 35k.

Tell us the advantages over our queen and strong decoders.

@iliyande. Read here: www.nairaland.com/385785/all-dreambox-receivers

iliyande:

Tell us the advantages over our queen and strong decoders.

Pls i need somebody dat can help me restore my strong decoder SRT 4663XV... I stay in lag slere

blexxonmak:
@abdool09. Oromiyaa TV tp => 3626 R (DVB-S MPEG-2) 2000-3/4

@blexxomak,pls waptv on intelsat20@68
.5e is mpeg2

Thanks @ Blexonmark, please does anyone get light tv, rock tv, rave tv, sunshine tv, r2 tv, imedtv, canal algeria............. All on Multi tv? Please. Share your current tp. I get all of this but the ones I need most (light tv and rock tv) are just 20- 32% SQ on my 4950H (12522V/27500). S--71% , Q--90%

@Bencoprof. DVB-S2/QPSK MPEG-4

Bencoprof:
@blexxomak,pls waptv on intelsat20@68
.5e is mpeg2

@Janyves.
Light TV => 11595 V (DVB-S2/8PSK) 29999-3/4
Canal Algeria => 12303 H (DVB-S MPEG-2) 27500-3/4

Janyves:
Thanks @ Blexonmark, please does anyone get light tv, rock tv, rave tv, sunshine tv, r2 tv, imedtv, canal algeria............. All on Multi tv? Please. Share your current tp. I get all of this but the ones I need most (light tv and rock tv) are just 20- 32% SQ on my 4950H (12522V/27500). S--71% , Q--90%

blexxonmak:
@Bencoprof. DVB-S2/QPSK MPEG-4

tanx my oga

really finding it difficult to track IRIB TV3 here in abuja.

any advise/tip plssssss. I hv used both ku & c-band lnd

odilibe:
....actually how it works: the 90cm dish receives a signal from a particular satellite then reflects it to the subreflector..and from sub reflector to the lnb! Making the signal more concentrated @ the sub reflector ..as double reflector dish!..

As you can see from below diagram ..how I used a flat circular surface from a 1.8m pan dish..as sub reflector to lock CCTV China on eutelsat@36east 12034V27500!with Ws-6906 sat metre!.on dstv position..this is an experimental double antenna reflector setup..in this case the lnb is not looking at main antenna!but at reversed position..pointing to the subreflector..the main purpose of a subreflector!if set up properly!is to improve overall efficiency of the main reflector!

Cheers

wow intense!! This is more difficult that inverted setup! It still haven't sink in! Is it that u track 36degree with d 90cm dish and den decide to turn d lnb backward! Cox d last time I tried blocking my lnb with my hand while facing d dish, it loss signal! Isn't the sub reflector blocking the signal? Or does it affect d signal in a way or the other? From this setup I consider maself already a mediocre.. I been think sey I don master every technique in satellite!... I'd like u to hmu on whatsapp or any social netwrk! Lemme know more from you!$

Gracias!

flashyberry:
wow intense!! This is more difficult that inverted setup! It still haven't sink in! Is it that u track 36degree with d 90cm dish and den decide to turn d lnb backward! Cox d last time I tried blocking my lnb with my hand while facing d dish, it loss signal! Isn't the sub reflector blocking the signal? Or does it affect d signal in a way or the other? From this setup I consider maself already a mediocre.. I been think sey I don master every technique in satellite!... I'd like u to hmu on whatsapp or any social netwrk! Lemme know more from you!$

Gracias!

All divergence rays coming from the satellite in the sky will bounce on your dish.Your dish will converge all the rays into a particular point while the sub reflector picks the rays into a straight line and send it into the throat of your lnb.
If the sub reflector is too big it might affect your signal quality if you are handling a prime focus dish.it works efficiently with off set dish because all rays bounce on the surface of the dish at offset angle to the lnb.

@blexxonmak
bro i hav acquired the 4922D...so to enable me unlock tv3 i should download the latest patch for 4922A frm crosat right..

Again a friend of mine asked me to upgrade his 4950H for him...the problm is dat on the front panel its written 4950,while in the system info/ID its written 4950H....while on the packet of the decoder its written upgraded to 4950H...
So which is it...4950 or 4950H.... Again the power ON logo is a strong logo not multitv...now on crosat there is only software for srt 4950H with multitv....what of for strong logos.... Abeg i nid to be sure b4 i fry person decoder.. Tanks.

As 4 my 4922D hope there is no bug in the current 4922A software patch that can affect its functionalities.

Euroadams:
@blexxonmak
bro i hav acquired the 4922D...so to enable me unlock tv3 i should download the latest patch for 4922A frm crosat right..

Again a friend of mine asked me to upgrade his 4950H for him...the problm is dat on the front panel its written 4950,while in the system info/ID its written 4950H....while on the packet of the decoder its written upgraded to 4950H...
So which is it...4950 or 4950H.... Again the power ON logo is a strong logo not multitv...now on crosat there is only software for srt 4950H with multitv....what of for strong logos.... Abeg i nid to be sure b4 i fry person decoder.. Tanks.

As 4 my 4922D hope there is no bug in the current 4922A software patch that can affect its functionalities.

My SRT4922A is the same as your friend's own. I went ahead to upgrade it with the software.

iliyande:


My SRT4922A is the same as your friend's own. I went ahead to upgrade it with the software.

Tanks... Has the decoder been working well ever since then and has it maintained stability in terms of hardware n software functionalities

Euroadams:


Tanks... Has the decoder been working well ever since then and has it maintained stability in terms of hardware n software functionalities

@eurodam ur help is needed in buy of 4950H in onisha.

@Oga blexxonmk are u still in onisha?

@ehisdan. In Awka,Anambra State, right now.

ehisdan:
@Oga blexxonmak are u still in onisha?

Euroadams:


Tanks... Has the decoder been working well ever since then and has it maintained stability in terms of hardware n software functionalities

Very stable and improved performance

@Euroadams. The words in Blue are mine.

Euroadams:
@blexxonmak
bro i hav acquired the 4922D...so to enable me unlock tv3 i should download the latest patch for 4922A frm crosat right.. NOT NECESSARY. RESCAN TV3 WITH THE FREQUENCY: 12522 V 27000-AUTO. NOW SELECT TV3. PRESS 6969 (2X) TO TURN ON THE PATCH. PRESS 8280 TO GO TO THE BISS EDIT TABLE. GO TO ROW #40.PRESS OK AND INPUT : 9E37794EB97F4A820000000000000000. PRESS EXIT. YOU WILL SEE THE DIALOGUE BOX:Settings were changed.Do you want to save? SELECT YES.

Again a friend of mine asked me to upgrade his 4950H for him...the problm is dat on the front panel its written 4950,while in the system info/ID its written 4950H....while on the packet of the decoder its written upgraded to 4950H...
So which is it...4950 or 4950H.... IT IS 4950H

Again the power ON logo is a strong logo not multitv...now on crosat there is only software for srt 4950H with multitv....what of for strong logos.... Abeg i nid to be sure b4 i fry person decoder..
DOWNLOAD: SRT4950H V3.08P_20141216.zip
FROM: http://crosat.us/upload/index.php?&direction=0&order=mod&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Middle%20East
Tanks.

As 4 my 4922D hope there is no bug in the current 4922A software patch that can affect its functionalities.