Theophinio:


Good day sir

Are you in this line of business

I have some questions

Good day sir.

Please what is your question

WASTE PLASTIC BOTTLE SUPPLY BUSINESS

The value chain in plastic recycling business is so long that you can start from any of the level
If your business is to supply the waste plastic PET to various recycling or plastic manufacturing
Companies, below is the process.
1. Get your supply
You can get your supply from the following sources
• By sourcing from the environment yourself
• Buy from Environmental agency workers e.g LAWMA, OGWAMA, ESEMA, e.t.c
• Buying from scavengers
• Construct a cage with inserted label “Plastic Bottles only “. Place this cage in busy area such as markets, schools, hotels, recreation centers, shopping malls, religious centers, etc.
• Buy or source from manufacturing companies that dispose this materials as their waste products.
• Get from any other legal means, etc.

2. Separate the materials
After getting your supply, you then separate them according to their thickness/colour.
• PET bottles of same colour/Thickness goes to one section
• Cappings ( Plastic bottles cover) of same colour goes to one section
• Pure water Nylon of same colour/Thickness goes to one section

3. Removal of Label, Cleaning and drying.
If the plastic is dirty, cleaning is necessary. The main cleaning steps are:
• Drain the remaining fluid from the containers into a collection tank
• Rough clean the plastic containers and other pieces of plastic.
• Remove labels, stickers, etc from the body of the PET bottle.
• Wash effectively in cold or hot water with addition of detergents or caustic soda
• Dry the plastics naturally (sun) or mechanically (conveyor Oven).

4. Scale the materials
The materials should be scaled (weight) to 10kg, 20kgor 30kg and then transferred to baling (Compacting) machine

5. Bale (Compact) the Materials
The scaled (weight) materials are then put inside a baling (compacting)
Machine, which is use to press the materials to a specific dimensions for easy transportation.

6. Store the products
You then stack your products for easy loading to vehicles

7. Supply your Products
Below are your markets where to supply your products to
• Middle Men
• Plastic recycling companies
• Plastic manufacturing Companies
• Plastic Exporting agents
• etc

Equipment Needed
1. Baling Machine
2. Washing Tank ( Optional)
3. Scale ( at most 50kg)
4. Space ( at least ½ Plot of Land )

For Enquiries, sales and fabrication of plastic recycling machines.
Please contact us at
www.abcmachinery.com.ng
abcmachineryng@gmail.com
080-116-3053 (whatsapp/calls), 08057883203, 08132514304

Cutecharlz:
Greetings everyone. My company just shut down due to economic polices, no incoming business nor fund to sustain the staff. So as it is now, I am back to the street.
I made a savings of 500k from my meagre salary of 65k monthly. I am married with a kid.
What business can I venture into that can sustain I and my family before house-hold expense will reduce the money to nothing.

Please I need a good and legit advice from everyone.

Thanks.

Go start Akara business with your wife.

She fry while you sell.

You don't need up to N100k to start in a good location.

Guess who is giving the award ?

Phillip shuaibu .
The current Deputy Governor of Edo State

What about Silas Nwankwo of Nassarawa United

Bendel Insurance

Please add me

0806-116-3053

Charbriq2022:
it burns relatively longer when compared to wood charcoal

But It is compressed powdered form.

It may give more heat but I am still skeptical about it duration when compared to wooden charcoal

Charbriq2022:
Charcoal briquettes are charcoal like substance made from wastes like corn cobs,leaves/shrubs,saw dust or rice husk,it is made by compression after it might have been carbonized.
Uses.
Used same way as charcoal for cooking, roasting corn and plantain, and for whatsoever wood charcoal could be used for..
Advantages
It is usually cheaper than wood charcoal and have a great potential of replacing wood charcoal because it can be made available throughout the year and it lasts longer in cooking than wood charcoal

How long does it last while burning when compare with a 1kg of wooden charcoal.

Business of Manufacturing/Sales of Plastic Lumber

Introduction
Plastic lumber are regular shape building material structural sections which are made from recycled plastics (e.g. PET bottles, buckets, Plastic Containers, PVC-pipes Nylons, pure-water satchet, etc.).
They can be produce to the various sizes of wooden/Steel building materials. E.g 2”x2”; 2” x 4”; 4”x 4”; 1”x 12”, 1- 6” round bar, etc.

Uses
Depending on their shapes they can be used for various purposes e.g Fencing, Rails, Frame structures, benches/Tables, Floor decking, Landscaping/garden furniture, Heavy duty machine flat shock absorber, storage boxes, etc

Benefits of Using Plastic Lumber
1. They last longer. They don’t get rotten or corrode by air/water as in the case of wood and steel.
2. They have very low installation and maintenance cost.
3. They are cheaper than wood and steel
4. They can be recycled and shaped for other purpose.
5. When use as bench, they are softer and more comfortable than wood or steel.
6. When use as fence, nails can be easily driven and remove at any point.

Where to sell them.
The easiest place to sell them is in wooden or building materials market. In this place, they are stock alongside wood or steel where buyers can have alternative materials.

Manufacturing process
Plastics granules are fed into and mixed in an extruder where rapid melting and homogenization occur. A vertical screw plunger discharges the material into a mold. The mold is then cooled in a cooling Tank or in a water spray tunnel and thereafter sent to the section where the products are cut into various sizes.


Equipment
The major equipment needed for manufacturing plastic lumber are
1. Plastic Extruding Machine
2. Mold
3. Cooling Tank
4. Other accessories e.g cutter, Die, scale, etc.

For Fabrication, sales and Services of Plastic recycling Equipment, Please contact
AB&C Machinery Nigeria
0806-116-3053, 0805-788-3203
www.abcmachinery.com.ng
info@abcmachinery.com.ng
abcmachineryng@gmail.com

Introduction

In Nigeria, recycling of plastic waste is one area anybody can easily venture into. The raw materials are easily found everywhere. Processing companies are looking for more suppliers to meet their needs.

Plastic waste that can be recycled includes PET bottles, Nylon bags, sachet-water nylon, PET-bottle caps, plastic containers, Nylon bags, etc.

Plastic recycling business is so vast that fortunately or unfortunately as the case may be, only few people are doing it.

Value-Chain in Plastic Recycling Business

Plastic waste collection/ Sorting / Storage – Stage 1

Baling – Stage 2

Shredding (Plastics) or Agglomeration (Nylon) – Stage 3

Pelletizing – Stage 4

From the value chain above you can enter into the business of plastic recycling in any stage depending on your financial capacity.

Plastic Waste collection/ Sorting/Storage – Stage 1

This stage is the simplest of the value chain. It is mostly dominated by our brothers from the North with high/tight trading network. However you can get your supply from other source e,g manufacturing companies waste, schools, hotels, supermarkets, etc.

Supplier/Collection/Sorting – scale – storage – sell

Equipment Needed: (1) Weighing Scale (2) Packing Bags (Optional)

Baling – stage 2

One thing about plastic recycling business is that the more you move down the value chain, the more money you make. You will make more money if you bale/sell than selling directly. Plastic recycling companies pay higher per kilo for baled products.

Baling is very important especially when transportation/distance are considered. It is better to compact (bale) plastic waste for easy handling and size reduction to save cost during transportation.

Note: Before Baling, plastic waste should be cleaned and sorted.

Supplier – Scale – Bale – Stack – Sell

Equipment Needed: (1) Scale (2) Baling Machine

Shredding or Agglomeration – stage 3

If you want to go into plastic recycling business through this stage, you need a plastic shredding machine (Machine for cutting of plastics into pieces [flakes]) or an Agglomerator (Machine for grinding Nylon into powdery form [Agglomerates])

Having these machines you can operate in two or either ways

Buy from suppliers, Shred or agglomerate and sell to plastic recycling companies or
Operate as a milling station whereby people come to your place to shred or agglomerate and pay you for your service.
Supplier – Scale – Shred or Agglomerate – Store – Sell

Equipment Needed: (1) Scale (2) Shredding Machine or Agglomerator

Pelletizing – stage 4

Pelletizing machines converts plastic flakes or Agglomerates to granules before they are been sold to plastic manufacturing companies that uses extrusion, Injection or blow mould to form them into various plastic shapes. If you want to go into the business at this stage, you need a pelletizing machine

Supplier – scale – Pelletize – Store – sell

Equipment Needed: (1) Scale (2) Pelletizing Machine


for sales, supply and Installation of these recycling equipment

call/whasapp 0806-116-3053 or 08057883203 ( call only )

or visit www.abcmachinery.com.ng

Waste Nylon is found everywhere in our environment and is a good avenue for business. It involves three chains, depending on where you are starting from.

The process involves
1. Sourcing of waste Nylon Materials
2. Grinding of Waste Nylon Materials
3. Extruding (Blowing) of Grinded Nylon.

1. Sourcing of Waste Nylon Materials
i. Personal Picking: This is the simplest form of sourcing waste nylon materials. It involves no cost. You pick as much as you can. Note that this method may not give you high quantity of materials

ii. Road Cleaners: you can negotiate with Road cleaners working with waste management agencies like LAWMA, OGWMA, etc Give the “Road cleaners “ your Nylon specification, then tell them your offer per kg as well as the minimum quantity they should supply.


iii. Resturant, Eatries, Shopping Mall, etc: you can get high supply of waste Nylon from this source. A good number of them will be very happy if you can help them evacuate these waste materials from their premises.

iv. Pure water/Manufacturing Companies: you can get high volume from this source. Apply to the company as a buyer of waste products.

2. Grinding of Waste Nylon Materials
Grinding is done by operators that uses grinding machines (Agglomerator) to grind the waste nylon into smaller particles which are used as raw materials for blowers, extruder, injection mold, pelletizer etc to produce various plastic product.
You can sell your collected waste Nylon to these operators or grind them using their machines which they will charge you per kg then sell to plastic manufacturing companies.

3. Extrusion Plant
These are Individual, small or big companies that have extrusion machines for the manufacturing of Nylons or other plastic products.
With extrusion machine
i. you can produce Nylon films of different colours for various customers
ii. Produce your own products and sell
iii. Act as a major producer/supplier to big companies.


For Details and various plastic recycling machines, Please Visit www.abcmachinery.com.ng

0806-116-3053, 0805-788-3203

WASTE POLYTHENE (NYLON) RECYCING BUSINESS

Waste polythene (Nylon) can be used again as raw materials for production of other plastic products.
Examples of waste Nylon are pure-water sachets, Bread wrapper, Laundry bags, shopping bags, container cover, Agric Nursey bags, Rolls from manufacturing companies, etc.

Stage in The Business
1. Suppliers
2. Recycling Machines operators
3. Industrial Users

Suppliers
You can start this business as a supplier. All you need is the ability to differentiate each nylon according to their type. However, the processing companies will give you the type/specifications they want.
Equipment Needed
1. scale
2. Waste Nylon Washing Tank
3. Baling Machine (optional)

Agglomerator (Nylon Grinder) operator
You can come into this business as Agglomerator (nylon grinding machine) operator. You don’t need big space for it. At least a ¼ plot of land is enough to start.
As an operator, you can buy, grind and sell to industrial users or You can operate as a grinding mill where other people come and grind in your place as you charge them per kilo.
Equipment Needed
1. Scale
2. Agglomerator (Nylon grinding machine)


Industrial users
These are individuals or companies that process the agglomerates (grinded Nylon) to semi-finished or finished products. As an individual you can buy pelletizing machine and start producing pellets from the agglomerates and then sell to plastic manufacturing companies.


For Enquires on various plastic recycling machines.
Contact AB&C Machinery on 0806-116-3053 (WhatsApp/Call), 0805-788-3203 (call only)

www.abcmachinery.com.ng

High Density Plastic Crushing machine.

Uses: for crushing High density plastics such as crates, buckets, chairs, plates, cups, containers, etc
Capacity: [/b]160kg/Hr
[b]Machine Dimension: 6ft (1800mm) Length ; 6ft (1800mm) Height ; 5ft (1500mm) width.
Hopper Dimension: 24” (610mm) Length; 32” (812mm) Height; 28” ( 711mm) width
Weight: 750kg
Power Intake: 3-phase/60hp electric motor
Location: Lagos, Nigeria.


contact AB&C Machinery at 0806-116-3053 or 0805-788-3203

www.abcmachinery.com.ng

STARTING A PLASTIC WASTE RECYCLING BUSINESS

Introduction

In Nigeria, recycling of plastic waste is one area anybody can easily venture into. The raw materials are easily found everywhere. Processing companies are looking for more suppliers to meet their needs.

Plastic waste that can be recycled includes PET bottles, Nylon bags, sachet-water nylon, PET-bottle caps, plastic containers, Nylon bags, etc.

Plastic recycling business is so vast that fortunately or unfortunately as the case may be, only few people are doing it.

Value-Chain in Plastic Recycling Business

Plastic waste collection/ Sorting / Storage – Stage 1

Baling – Stage 2

Shredding (Plastics) or Agglomeration (Nylon) – Stage 3

Pelletizing – Stage 4

From the value chain above you can enter into the business of plastic recycling in any stage depending on your financial capacity.

Plastic Waste collection/ Sorting/Storage – Stage 1

This stage is the simplest of the value chain. It is mostly dominated by our brothers from the North with high/tight trading network. However you can get your supply from other source e,g manufacturing companies waste, schools, hotels, supermarkets, etc.

Supplier/Collection/Sorting – scale – storage – sell

Equipment Needed: (1) Weighing Scale (2) Packing Bags (Optional)

Baling – stage 2

One thing about plastic recycling business is that the more you move down the value chain, the more money you make. You will make more money if you bale/sell than selling directly. Plastic recycling companies pay higher per kilo for baled products.

Baling is very important especially when transportation/distance are considered. It is better to compact (bale) plastic waste for easy handling and size reduction to save cost during transportation.

Note: Before Baling, plastic waste should be cleaned and sorted.

Supplier – Scale – Bale – Stack – Sell

Equipment Needed: (1) Scale (2) Baling Machine

Shredding or Agglomeration – stage 3

If you want to go into plastic recycling business through this stage, you need a plastic shredding machine (Machine for cutting of plastics into pieces [flakes]) or an Agglomerator (Machine for grinding Nylon into powdery form [Agglomerates])

Having these machines you can operate in two or either ways

Buy from suppliers, Shred or agglomerate and sell to plastic recycling companies or
Operate as a milling station whereby people come to your place to shred or agglomerate and pay you for your service.
Supplier – Scale – Shred or Agglomerate – Store – Sell

Equipment Needed: (1) Scale (2) Shredding Machine or Agglomerator

Pelletizing – stage 4

Pelletizing machines converts plastic flakes or Agglomerates to granules before they are been sold to plastic manufacturing companies that uses extrusion, Injection or blow mould to form them into various plastic shapes. If you want to go into the business at this stage, you need a pelletizing machine

Supplier – scale – Pelletize – Store – sell

Equipment Needed: (1) Scale (2) Pelletizing Machine


for sales, supply and Installation of these recycling equipment

call/whasapp 0806-116-3053 or 08057883203 ( call only )

or visit www.abcmachinery.com.ng

Looking for Accommodation in
Ifo, Arigbajo, Papalanto, Ewekoro and Environ,

Please contact us on 0806-116-3053, 0805-788-3203.

We have 2 & 3 Bedroom Flats, Room and Parlour self contain, A room self contain, single room, etc.

We also have Large factory space for rental or sale

Judeerons32:
Obaseki. I expected the governor to show proof of the people who Oshiomhole nominated. Talk is cheap. I do know leaders in each local government choose representative that is why Oshiomhole has followers. It is like saying the president picked all the ministers. Obaseki honestly does not understand politics.

To me the biggest revelation in that statement is the governor acceptance and happiness that a Benin man is at the verge of loosing the NDDC chairmanship position just because he sees him as an opponent.
I am sure the Oba will be happy with Obaseki for fighting against the interest of the Binis and also the people will be happy. In his desperation to fight Oshiomhole and cling to power he has forgotten the purpose of power is to attract development. Odubu is a representative of Edo in that board. Obaseki has decided to openly fight the Edo agenda just because of second term.
He honestly has lost the palace and the remenant of the Benin support.
The question he should ask himself is who looses if Edo looses the NDDC chairmanship position. It is Edo. Oshiomhole can nominate an ally from Delta or Ondo if it is zoned there. Edo alone will loose. It just underlines how selfish he is and it is good people can now see clearly who has the interest of Edo at heart.

Obaseki wants Oshiomhole to behave like a god father. I am sure if Oshiomhole says today automatic second term for Obaseki the fight will stop is that not the character of a godfather? Obaseki should compete with others in a primary it is democracy if people decide to support another it is democracy.

When Tayo Apkata was in charge of PTF, how many Binis or roads did he built in Edo state. The only one i know of is TV road.
When Gaius Obaseki was NNPC chairman. Did Bini people benefited from. It.

Oshiomole should leave Obaseki alone, because. When he was the governor then, nobody acted as Godfather to him.

Enoruwaogbebor@gmail.com

please find below 2 nos of scrap construction equipment for sale

Price is N6m

Location Sango-Ota

contact 0806-116-3053 (whasaap) for inspection/details

tammyboy1:
Hi, this is a thread for graduate and registered Mechanical Engineers....The experienced ones can post softwares that can be helpful to us, Certifications we can acquire to boost our knowledge and skills, how to get certified by COREN,NSE, etc... In general, advises and suggestions are highly welcomed....Thanks everyone.

Join any of the NSE branch in your state, you can locate them through www.nse.org.ng

you need a 4 yrs working experience to become a fully registered member.

softwares depends on your field of speciualization

but some common ones are AutoCAD (general), Autodesk inventor (Manufacture), Autodesk MEP (Building Services), Revit structure or Advance Structures, MS-Project management, excel, etc.

Certifications: start working first then you will know which certifaction to choose, but PMP, is very good

your contact number

PDP chairman

Drnice:
To avoid scam, we decided not to post our contact address nor phone number here(as regards to a faceless forum), but you can contact the email below for details =>> goody.top9@gmail.com

your whasapp number,

for discussions,

Please drop your phone number for contact

TONCO ARC WELDING MACHINE

RUGGED SOUTH AFRICAN PRODUCT

CAPACITY: 250A
VOLTAGE: 220V
PHASE: SINGLE ( 1)

6 HIGH/LOW RANGES.
AMPERE SETTING
HIGH 250 230 165 136 100 75
LOW 225 185 150 120 95 60

WELDING ROD SIZES: 1.5 To 6.0 mm
METAL THICKNESS: Gauge 16 To 10

Features
• Robust and easy to Use
• TV interference free
• Built to comply with current safety specifications
• Life time guarantee against burnt out of Transformer
• Oil cooled for best performance
• Duty cycle 20%
• Completed with female connector

LIFE TIME TRANSFORMER, OIL COOLED
AS GOOD AS NEW.

PRICE N50,000. negotiable

for inquiries, contact

0805 788 3203,

0806 116 3053

Half Plot of Land alog Lagos -Ibadan express way,

located after RCCG when going towards Interchange from Lagos

Price : N400,000

for detail contact

0806 116 3053

The LPG tank below is for sale.
It was use once in an oil company before replaced with a bigger one.
All the structutres have been built you only need to fix a pump and start your gas business.
for price enquiries please call
0806 116 3053

The LPG tank below is for sale.
It was use once in an oil company before replaced with a bigger one.
All the structutres have been built you only need to fix a pump and start your gas business.
for price enquiries please call
0806 116 3053

still available with price for negotiation

i have a 30KVA gen to sell ,
whasapp me on 0806 116 3053

nkpommpko:
Please I need some ideas on how to sell a Zenith 250 tons per hour granite crusher worth 110 million naira. I know nairaland has intelligent business folks in it, please lend me your brains. Thanks.

whasapp me on 0806 116 3053 for discussion