₦airaland Forum

b2212:
Available
Reasonable offer this week takes it

lekkys:
This is a 3 seater car,4 plug engine and well function gear and air condition. The price is N1.850m call or Watsap me on 08179484015 for more details.

spyder880:
The whole cabinets, shelves and wardrobes in this house, including the two kitchen cabinets were done with a negotiated cost. We didn't cost them unit by unit.

spyder880:
The wardrobes we built for the BQ.......

icn121:
60GB of hard drive, 2GB of RAM. Bluetooth, CD/DVD writer, and Wi-Fi. The battery backup is beyond 3hrs. 08084211496 (calls and WhatsApp chats).

melakes:
Budget about N100k/unit for fabrications.

melakes:
What we do...
Frameless glass bathroom cubicles
Office partitions
frameless curtain wall
frameless glass Handrails
Stainless Steel handrails.

megacontrol:
Hello community,

Quick poll for a 2-bed luxury apartment. Only difference between the two layouts is the access to the 2nd bathroom (full WC/Bath).

Please answer A or B

Thanks

GoodFaith:
will u do 20k set
I need 15 total

Dtruthspeaker:
Update: all is well again, engine is running smoothly and quietly again.

Thank you all

b2212:
available.

LeonOgu:
A very clean 2007 Hyundai SUV, American, full option is available for sale for N1.8m

For inspection, call 07067789147

b2212:
buy now

b2212:
available.

dokyOloye:
Pls sir,what of new powerbikes?
Where are they sold?Some1 has been disturbing me abt it for long nw and he's due back to Naija in 3days.
Heard abt Coscharis and nothing else.

idrezee:
Good morning Nairalanders.
I really need advice concerning Mazda5 2006 model. This is my very first car; I need a spacy car cos we have 3 children......pls I need honest reviews about this car;
Cost of spare parts.
Durability.
Fuel consumption.
Tell me about the engine types, v4, v6, etc.
Are the mechanics readily available like Toyotas ?
How much can I get a Tokumbo.


Please I will really appreciate this if you help me. I need honest and genuine reviews.

Excuzeme:
Is it a good idea to use blocks, considering the weight of the Full-Tank that will be placed on it?
Why not just do small lengths of three feet high concrete beams that the tank will sit on, and then put something flat (like Hard Wood Planks) on it, if you dont want to slab/deck it with concrete?

Like @diordaves said, it has to do with Pressure, size of pipes used.
I have heard Plumbers say If you run the Pipe from the Tank, downstairs first and then run everything (all supply pipes) from there, Upwards, it will equalise/improve the Pressure of upper floors.

Also, there are some "pressure pipes" (if that si what Plumbers call it) that allows air to enter each discharge pipe taking water to each flat from the tank.
The principle as l undersrand it is that as the water reduces in the tank, it takes more effort to suck the water out. If air is not sucked-in (for closed tanks) to replace the water being sucked out, the pressure will fall rapidly. The air-pipes serves to reduce the inside pressure of the tank so it can easily give-up its water to the upper flats especially (increase the pressure).
I have it done when l had same problem and it improved the pressure for the upper flats. Give it a try, if you dont have it already.

diordaves:
This is very obvious; not enough gravity. To harvest the required gravity for a good water pressure inside, the water tank should be a minimum of one meter above the levelling blockwork AFTER the lintel. It is possible your water tank is almost practically sitting at the same level as your water heater or shower. You may only experience good pressure if your water tank is full; when half tank, little pressure. This is the classical disadvantage of on roof water tank construction. It needs careful planning and thought. It happens almost all the time with such roof tank adoption. External taps and downstairs kitchen should experience good pressure though. If your downstairs kitchen is not experiencing good pressure as well, look at the plumbing work. Smaller pipework produce better pressure.

For a simple solution, you may need to raise the height of your tank by two or three courses of blocks on the slab and then place the tank on the top of the blocks. You can only adopt this solution if you have the headroom to do so.

olaleks007:
Did one upgrade recently

Pictures below

GAZZUZZ:
upgrade wins!!. Vehicle will be upgraded to the 2012 trim due to popular advice . Thank you

GAZZUZZ:
The beauty of this car is slow moving traffic, engine has been off for over 10 mins just coasting on batteries

GAZZUZZ:
Ok here we go

adanny01:
Can you quote me or give proof that i tried to silence the complainer. I said several times, he should not call it fraud because timhis doesnt qualify as fraud! The seller made costly mistakes which i agreed and pointed out, it may be a breach of trust but not criminal breach of trust or fraud for that matter.

I gave the blame to the supplier and asked the complainant to talk to the supplier to find a way to send the affected items back and correct the mistake. I have told the op, if he doesn't want them, send them back.

You are deliberately trying to put words in my mouth.

To add:

I asked for left swing you gave me right.swing
I asked for oak colour you gave me walnut colour
I asked for box pattern you gave me round pattern

How does this supply become fraud or crime. Its a simple wrong supply, return them and get the correct ones and the story ends.

rotecch77:
Another done deal with old nl member
Real Italian granite counter top, from lagos to ondo state
Watch out for more pics

b2212:
Available

radautoworks:
Everything you need for your AC in one place

Z134 N4,250

R134a N4,150

R134a with UV dye leak detector
5 applications dye, yellow can N7,662
Single application gas, purple can N14,969

PAG 46, 100, or 150 oil approx N3,950

b2212:
still avaialble

Denn:
Thanks for the input Gazzuzz.

The 2007 Hyundai Elantra is very similar to the 2007/8 Kia Cerato and even shares similar power train and layout.... exhaust manifold in front and intake manifold from the rear of the engine.

The 2013 Kia Rio on the other hand has a completely opposite layout with intake in front and exhaust at the rear.

Vehicles with exhaust manifolds in front have their exhausts modded to flow under the engine around the beam, rack and other components all the way through the bulkhead.

This would involve modifying the steering rack set up, fabricating a lower beam as the Elantra or cerato is wider, and hammering the bulkhead to pave way for the exhaust pipes.

The current set up has the steering rack directly sitting in any space the proposed exhaust might try to snake through and the opening on the body for the exhaust extremely higher than the beam to allow for the default exhaust to just slip out straight to the back without any bends.

Infact, I bought a 2007 Kia Cerato just to do this and saw all these issues.

The 2009 Kia Cerato on the other hand has the first iteration of the same engine in the 2013 Kia Rio with a plastic intake manifold in the front and the exhaust at the rear. Infact, my brief glance tells me it is the same block, save for difference in displacements....the same block I am trying to run away from. The major difference I noticed is that the 2009 is a drive by cable while the 2013 is a drive by wire.

StarboyQ:
Where is your center? My niece is yet to get home and her center is in onipan. She was to write by 1:30pm
I wrote mine in Abuja,AMAC in karu