Bode4real's Posts
Nairaland Forum › Bode4real's Profile › Bode4real's Posts
@ jayron, Pls try to schedule branching my place to ur plan, will love to av u. will give u a call Sat. nite Enjoy. |
jayron:I stay a 15mins drive away from challenge going to iwo road. Soka bus stop. |
i missed the pic of the component
|
Jayron, After so many tots, i concluded that the power to the LNB is not enough, b'cos, if i loop from my 53x to 69x the signal is hiting green, but from lnb to 69x is red, So i called on a guy an Installer and technician(radionic) he trace where the power to the LNB coms from and we change the semiconductor which is LM317T, its like a voltage regulator IC. after this my decoder start hitting green again. |
bode4real:Jayron, thanks for ur concern and calls, Spaceman, appreciate you. My 69x is now working fine with W4 signal at 87%, will give the load down after my morning briefing in the office. |
All gurus, This my 69x works perfectly with other birds signal hitin green, (connecting other dish to the decoder NOT the same w4 dish) my tought is dat can it be dat my decoder can not power the LNB? will try and change the LNB with one on another dish or wot else do the gurus think ? |
@, jayron, Spaceman, Sammu, My 4669x still fails to get signal following al d input from u guys. the signal strenght with 53x is 97% but red on 69X. But to my surprise wen i loop out from 53x to 69x here comes the signal. i mean dat i connect the w4 cable to 4653x and loop it out to 4669x and there is signal. the funiest thing is dat this only happens IF 53x is ON. if its off or on standby no signal. |
Jayron, thanks for ur call yesterday nite, i rea;ly appreciate it. |
bode4real:I've tried all info i got here but to no avail, still no w4 signal on my 4669 |
@ Sammu, Jayron,spaceman, ameboperoo, thanks a bunch, i'm office now, will put all ur points together wen i get home. |
@ Ameboproo, d prob not from sammu, its from me. this decoder is working fine until yesterday nite, wen w4/w7 signal turns RED, pas 7/10, w3a, astab turns green on the same decoder,but not w4. the same w4/w7 dish and cable turns green on 4653 but REd on 4669. no diseqc its a straight cable. pls if u dey messenger can we chart |
@SAMMU thanks i've done that, i even reset to factory set but no show. |
@ all, Pls i need help on my srt 4669x, this decoder fails to receive eutesalt w4/w7 signal but receives pas 7/10, w3a, astra2b signals. the funiest is that the same w4/w7 cable gives signal on srt4653 all this happens yesterday night. pls someone help. |
@ all, can i add ep 20 |
jayron:name the qualities and describ such characters |
jayron: |
To d concern not to mention a few name, Olofofo, Enitan, Bodejohn, and other g group member. APPLICATION TO JOIN THE BACKYARD GROUP. location-ibadan mail-oyebodewaleo@gmail.com will be glad if i'm considered a member. |
@ sun sat, Thanks i will check my dish alignment |
@ all, Pls need someone to comfirm if W3A signal on on, mine is RED since yesterday night. nee to know before i start turning my dish |
Pls. i need software for MTN or ZAIN hauwei E156, E160 or E162 modem, this software can be copied out under my computer after pluging inn the modem just copy the modem icon. thanks oyebodewale@yahoo.com |
Pls. i need software for MTN or ZAIN hauwei E156, E160 or E162 modem, this software can be copied out under my computer after pluging inn the modem just copy the modem icon. thanks oyebodewale@yahoo.com |
Pls. i need software for MTN or ZAIN hauwei E156, E160 or E162 modem, this software can be copied out under my computer after pluging inn the modem just copy the modem icon. thanks oyebodewale@yahoo.com |
help with unlock code E160G IMEI- 359390028464461, THANK |
@ all, pls and pls, wot channels is receivable on this astra2b |
@ Enitan, pls av gotting the "half baked bread, so let me get the full one" its all about the zain thing need more details for the pc connection my mail is oyebodewale@yahoo.com |
SAYSO LOOK AT DIS ATTACHMENT |
@ Sayso, better to use ur 4563x strong decoder 1. On ur diseqC u av 4 LNB in and 1 output to receiver, connect pass10 to LNB 1 input and NSS7 to LNB 2 input and the output to ur receiver ( this done very close to ur dish meaning only one cable run into ur house. 2. on the decoder *press Menu, installation *press dish settings *change sat to pass 10ku * scroll to where u av diseqC * put DiseqC to on *the next column change it to 1:1( this will b ur pass 10 input signal) note:- u will c a number 1234 and the connection from dish is on 1 exit, save settns YES GO BAK TO THE SAT *change it to nss7 *scroll to diseqC put it on *change the next column to 1:2 ( this is ur nss7 signal input) * save settings note:- u will c a number 1234 and the connection from dish is on 2 now press group u will c all sat pass 10 nss7 all sat show all chanel available hope this wil help |
infomatic pls i need the software if its totally free. oyebodewale@yahoo.com or oyebode.o@pg.com thanks |
infomatics: |