₦airaland Forum

greggng:
I had exactly this same problem . I visited so many experts who come on radio to discuss auto issue but they only speak grammar. Thank God I was able to meet a mechanic that collected only 8k to fix a problem that nearly made me go for another engine. He scanned the car. Got all the codes and brought out his other laptop and clicked on application that brought out the diagram of my car . As he was looking at it he was writing out his report as if he is a medical doctor. At the end he discovered my caterlist , temperature sensor, the two oxygen sensor are bad and also he changed the plugs. . That was how my car remained calm and all problems disappeared till date. I call him car doctor. May God bless Mr Adebayo the mechanic

where is this Mr adebayo aka.. Cardoctor located..?

Bigmind:
You are one of those mechanics that rip people off. I understand the source of your anger.

I have been using for well over 3 years now. Works perfectly.

most likely.. He bought the one that dosent work.. Cos. Mine has been with me too for 3 years. And it works wonders

cardoctor:
Rubbish item. It doesnt work. Waste of money.

it does work sir. I have the one that works super fine..

jaychubi:
Pls avoid anything Honda, go for Toyota

DNT say u were not told

Since u can't get Carina e, go for 1998 camry

why should he avoid Honda? You may probably not know that Honda engines are stronger than Toyota engines.. I would pick a Honda anyday

Rubbiish:
Is your foundation training for free?

good point raised

GAZZUZZ:
you want me to recommend?

pleaae recommend any mecho In ph that can help with my work.. Pls..

Pls can anyone kindly recommend a mecho in ph that can do the job??

GAZZUZZ:
Least of your worries. Iv never seen 1 get bad on that engine, just check the 2 sockets.

thanks a lot boss.. I would ask them to check it. Pls incase you know any good auto engineer here.. I would be glad if you recommend one in ph ...

MotorGuru:
Kindly check the integrity of all connections, then your wiring to these sensors.It is more of a circuit problem.
VTC solenoids on the K24 engines fitted to this car rarely goes bad. This would be in the least of my suspicions.

Thanks a lot boss.. I would type appreciate if you can recommend anyone in ph

sultaan:
Remember that it is a circuit fault so you new to Chen the integrity of sitting and connection.
Sometimes all you have to do is disconnect and reconnect because the last person did connect the plug properly.

I am not sure how many camshaft you should have in your 4 cyl, check to make sure you have the right ecu number ad no vacuum leak from cracked hoses

i guess it's two Cam shaft.. Thanks a lot boss.. I really appreciate the input..

Besto:
Bros what is dancok

Hahahahahhssh.. Old Nairaland car guruz here know who dancok is as well as his story..

ade7063002666:
my mazda premacy is drinking fuel like pwater

scan..scan and pls scan your car.. It will give you codes that points where the fix should be

Any more contributions gurus.. I need more guys.. I need to be properly armed.. I now understand that my o2 sensors need to be checked.. My major concern is the camshaft sensor code...thats what I really need to understand

Adeblessed:
I need solution to this Car Problem. I got it 2 months ago... It usually go off anytime i slow down when driving or in traffic. I don't know what next to do , my rewire had worked on it but still not perfect. Pls kindly give me an insight on what to do..

please scan it... The scan results will tell you where to work on..

Himmm.. Do I see another dancock here.?? Timifakay..obekediamondfuto.. Kingreign.. Sultan.. Gazzuzz.. Mayor123...chukel and other guruz.. I am seeing something here oo

sultaan:
I think bank 1 is driver side so check the second o2 sensors like the one under the car see if the wire is damaged ,repair and insulated with proper electric tape then check and replace e the burnt o2 heater fuse.

Clean your throttle body and idle air control valve than might herewith idle.

I don't know what your cam sensor looks like now but find an engine diagram inspect wiring first then connection just I case oil leak got into it

i will boss..thanks a lot for the input...i will give feedback after checking on sat

GAZZUZZ:
.Confirm if all the wiring connected to O2 sensors are intact, if ok, replace these 2 sensors p0141 p1157



Check wires connected to both cam sensors, 1 is loose(never seen a honda accord cam shaft die) P0010

Some one fiddled with the butterfly reset it back. p0507

thanks a lot gazzuzz.. I just googled the butterfly you mentioned.. This is what I got.. I guess that's it.. And I am quite familiar with it..

timifakay:
Monitoring spirit.
Representative of village people.

Hahahhahahaa.. Infact Eh... Pls oh.. Back to the matter on ground sir.. I know my issue might be minor.. But.. Make una help nah... I no want be dancock

EgunMogaji:
Join a Honda forum and read up.

In the meantime look for frayed wires and unplugged clips in harnesses.

ok ..thanks.. I actually asked here cos I wanna know what a rewire would look at before embarking on the fix

EgunMogaji:
Join a Honda forum and read up.

In the meantime look for frayed wires and unplugged clips in harnesses.

ok ..thanks..

Specialist900:
na so you take leave me for babyboy?

Wash am reach my side o. I tot you said you'll be going for a v6 instead of i4

my brother.. I searched for the v6 bro.. But the ones I saw had issues after I scanned them and I will not describe the issues as minor.. So I saw a v4 that was good.. And I got it.. Hahah.. I am still a baby boy fan.. My baby boy still dey lag.. I dey ph now.. Hahaha... Still a hard core v6 fan though..

thebigkendo:
Before we go further,Please answer this:
1. Do you have access to a Multimeter?
2. Do know how to use a Multimeter?
If any of your answer is "NO", jejely find a competent Kazeem rewire Technician who knows how to use a scanner

Any recent work on the car?

also..if I happened to get a good rewire. What will I tell him to check with the multimeter??and values to expect..

thebigkendo:
Before we go further,Please answer this:
1. Do you have access to a Multimeter?
2. Do know how to use a Multimeter?
If any of your answer is "NO", jejely find a competent Kazeem rewire Technician who knows how to use a scanner

Any recent work on the car?

I Dont know how to use a multi meter.. No recent work on the car sir...thanks for the advice.. As for the pending code. I thought cleaning the throttle body will solve that.. Cos the car has been parked for a while..

GAZZUZZ:
you are clearly not Hands on.

take vehicle to a tech that can understand the codes.

i am not ..but soon I will.. I really don't know any good tech here.. I just moved to ph.. Can you kindly recomend auto tech in ph boss. Thanks a lot.

diportivo:
you have not washed the car for us therefore I'm not commenting on the issues u have

last time I checked,na baby boy u dey drive

last last time I checked,na Avalon u wan buy

Hahahahahhssh.. FBI investigator..the Avalon was supposed to be a second car boss.. Besides the eod.. Heheheh.. The baby boy has a new owner in Lagos. My younger bro... I am in ph now boss.. How I fit take send the origin and fish??

hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreignn, honmusa, timifakay, chukel, motorguru, thebigkendo, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

majestique:
your qualifications suits a current job opening in a mfb in lagos. Not to worry, I'll keep you posted.

Allright. I would love that.
Thank you

majestique:
Vacancy for the position of HR Manager in an Automobile manufacturing company in Port Harcourt. Minimum of 5 year relevant experience. Bsc/HND in any social sciences, professional qualification (cipm, sphr etc) will be an added advantage. Must be a smart and innovative. Interested persons must be resident in Port Harcourt or in lagos and willing to relocate to PH. Send CV to hr.recruitmentagency24@gmail.com with HR Manager as subject.

hello, . Thank you

Are there no micro finance banks in ph? I am a micro finance expert who have worked in 3 of the biggest mfbs in Nigeria.. I just relocated to ph and would love to continue working in the mfb industry..thanks..

McOrezi:
Today's jobs 18/01/2018����

Hurry now to fill in any of the following vacancies.

A female Secretary with good computed skills especially knowledge of Corel draw needed urgently @ woji


�artillery nursery school teacher.

�Basic 3 teacher, minder and front desk secretary needed at stadium road

�primary 3 teacher igbo etche

�nursery and literacy teachers needed for immediate employment at alcon woji

�nursery school teacher

How to apply
☎ 0808 901 7224
or send your CVs to leadersenclave@gmail.com
Interviews start today at the office.

Do you have any opening for micro finance expert.. I have 6 years experience in the micro finance sector.. From companies I worked with in Lagos.. I just relocated to ph.. Thanks

nanauju:
Please who has any idea of how much Creditville Nigeria Limited pays for Management Trainee position? I'm in a fix now and I need answer to that.

P.S: I have checked online and I found nothing. Thanks in advance

call me on 0000 ..if you are still up for the job

Davidolives:
funny enough dealers will still collect percentage from the seller

abi..you are right bro..