For the crypto guys ...find ur virtual dollar card directly using Astrapay .... I'm not into crypto though ...I use Payday as my virtual dollar card ..rate is still better

haaaaaaaa

olukaygold:

Oga mi! Honestly I know who you're talking about sir. To
be outspoken, pls don't judge me based on the way I responded to critics here, that's not who I am in reality.but there are some clients they won't give you job but only want to use your brains and pay you peanut inform of transportation money.I don't do such(Nobody prays for Wasted efforts) What caused the disagreement between the client and I was; She asked me to come to the Site to check the work and I responded that we can seal everything on the phone here. which we spoken for good three days(minimum of 1hr WhatsApp call per day, explaining how the work would be done) But the client insisted I must go to the site. No where is safe in Nigeria now,Out of my busy times, I can't risk my life to check out the Work and still at the end;the Contract will be awarded to someone else(No oke prays for Wasted efforts).I only asked her to send 30% of the agreed price to my company account then I'll come the next day with my Team. We don't pray for wasted efforts. The client sent two different voice notes abusing me but I just have to replied her that IM SORRY,still texted the client second day asking her to forgive me and overlook my shortcomings in which she replied yesterday. There are lots to say,but I just have to overlook it and move on. This is not me on reality sir. I only maintain Client - Contractor relationship,Not Master-Servant relationship.I'm so sorry for all the disagreement here and there sir. @Kopell I'm so sorry for dishing out that rigorous word. I'm so sorry House

even though i may not agree with your approach but....damn..!! some clients wicked die.... they'll only seek for information's from u and when its time to award the contract ..dey will just blank out.... no one prays for a wasted effort truly. That was how a colleague of mine got an invite to come to portharcourt to check a project and submit quotation... brethren, My friend was kidnapped... he was dispossessed ..beaten to stupor...and disposed off after spending 4days with the kidnappers.. May God save us..!!

Go and buy knockouts...the very loud once.... whenever they are assembled...light it up and throw like three at a time .... continue till they eventually relocate

ATLIEN2027:
Wasted and irrelevant endorsement.
Pandora pathological liar Obi tuary is an IPOB terrorist project that's dead on arrival.
These are some brainwashed delusional retar@ded ipob terrorist Zombidient fools.

lol.. the way u even constructed your line really sounds funny to me. Do u need all these jargons ?

okikigsm:
Pls house,where can I get this with likely price? Lagos/ibadan/osogbo etc

why not purchase from same Aliexpress

use payday

https://www.usepayday.com

i like this

Petersunpet:
We urgently need a POS operator (Female) in AGUDA, Surulere, Lagos.

Qualifications:

Must be able to read and write

Female only.

Payment: N15,000 per month

Only individual living around Coker Orile, Surulere should apply for this job, AGUDA preferably.

Kindly call 08189030790, 08035198605 to apply.

©Petersunpet Global Company.

...and u Call this a job? u expect her to spend #500/day..? Fear God now... haba
This should be moved to the crime section

.....what on planet earth did i just read...?

EyeBee04:
Please how much would it cost to fence a 250sqm land

what location?

Olumighty123:
Please how many 6inch block would fence a full plot of land? And how many couch? Thank you

size of plot varies with location most times..... what is the dimension of the said plot

Sankabson:
I have 2 bedrooms apartment at Igando housing estate. Newly built by Lagos State Government.

How much is it please

sonnie10:

Please how did you arrive at the figures for the length and width of the columns being that he has 16 pillars ( assuming each pillar is 9 feet which is approximately 3m in length).

"Length 50feets: breath 25feets: width 9inch"

The above is the dimension he gave me.
Although, that is not what i was expecting as i don't understand the basis of the value but i don't want to go back and forth. i stated that i was going strictly with his dimension. I only converted to m/mm

Akerewe:


The entire pillars is 16 Nos
My mixing ratio is 1:1.5:3 u can as well recommend the best mixing ratio for me also. Length 50feets: breath 25feets: width 9inch size of a 9inches blocks which was used for the entire wall.

Also is it ok to use 16mm for the columns and 12mm for the upper beams for a storey building

Your dimension is a bit confusing though. But if i am to go strictly with the parameters u gave me =
L= 15.24m
B= 7.62m
Thickness= 0.23m

Total Concrete Volume = 26.71 m3

For the concrete grade 20 u intend to use, You will need;
Cement= 215bags
Sand= 16tons
Aggregate = 33tons

Regarding your question asking to use a certain size of reinforcement, I will advice that you stick to your structural drawing.

Cheers!

bixton:
Good day....
Please is there anyone who has done conduit piping for AC points/units I'll like to know what you charge?
Thanks.

If you're in Lagos; Call Abraham Jacob for anything A.C. His team has worked for me severally. 0806 663 7778

Akerewe:
Good day engineer in the house, pls like how many tons of sharp sand & 3/4 granite including cement can cast. 16 pillars successfully including the lintel

* What are the sizes of the "pillars" (LxBXW)
* What's your Mix ratio

dangoteinlaw:
you miss my point sir, the qs is part of the team I am not deputing that however the Architect has an idea of building materials costs and how to Design to budget. If the client is complaining of an expensive roof then probably the Architect didn't talk to him about his budget or the project started before materials became more expensive.

I understand you clearly now

You're very right boss

dangoteinlaw:
that's after a Design is completed however during Design phase the Architect has a vivid idea on what materials to use to beat down costs. though you are right, he has to share the plan for a better advise.

In standard practice, The Quantity Surveyor is part of the design team

sonnie10:

This house is too big to be just 230sqm

I concur

unzend:
Hi Everyone,

I got a roofing quotation of 4m for a 21x10m building.
Sandcoated roof tiles

I am thinking of decking instead.

The money is too much.

Kindly advice

4m is Terribly high. However, let's see the design from your architect...who knows, ... the design of your roof might just be like the picture previously shared .....20m high roof

dangoteinlaw:
the Architect should have taken cost into consideration during Design but my bet is that he wasn't paid enough to do the detailings.

A quantity surveyor is in the better position to advice on cost.

Nevertheless, he needs to share more details of the roof i.e drawings

Coiner:
Greetings my people.

Please how durable are these doors. My location is still a developing site and I need something[b] almost unbreachable.[/b]

Pls go for something unbreakable.... "Almost" no go do am o

Hycon:
Hi everyone, is anything wrong with this window style?

Also, what do you think about a design like this?

Thank you in advance!

Small.

1200mm x 350mm(assumed from the 3D) will give u less than half a square meter per window opening. It is obviously too small. I want to believe the house will be on AC 24/7 cos u can't rely on natural air with such size. besides, the rooms might be dark unless 24/7 lighting is guaranteed

Your architect could have increase the width if he/she wants to do the american style

Twostep:
Good morning house, kindly help me vet this quotation, looks way overboard.

Please will appreciate inputs.

Take this Quotation for free a s a guide. This is a for a standard sized full plot(since u did not state the size) excluding discount. Workmanship and Labour. Location=Lagos

(1) Energizer 120,000
(2) stranded wire 22,000
(3) pole 42,000
(4) spring 8,000
(5) hook 7,000
(6) warning signs 8,000
(7) alarm 5,500
(8 ) HT cable 9500
(9) workmanship = 40,000

Total cost is 262,000

Soldierboy30:


Thank you, I got a quotation for 29million, too scary I had to run on here for help.

OOh, I am just seeing this.

How much is he allocating to each item i.e
Substructure,
Frame,
Upper Floor,
Staircase,
Roofing,
Internal/External wall,
Doors,
Windows,
Wall Finishing,
Floor Finishing,
Ceiling Finishing,
Plumbing Works,
Electrical Works,
Painting and Decorations
and External Works(Fence,Floor etc)

Twostep:
Good morning house, kindly help me vet this quotation, looks way overboard.

Please will appreciate inputs.

This Quality?

Soldierboy30:
Good morning, please any idea on cost of building this from start to finish?
4bedroom ensuit bungalow with penthouse.
Location Uyo.
Thank you

Depending on the interior finishing. This will not cost anything less than 28m-30m considering the spike in the cost of material. However, there are several ways minimize cost while still maintaining same standard. If the project is in the west. I willed have dropped a summary breakdown

Kaymus:
3 plots of land for sale with C of O at Coker Aguda-Surulere, Lagos State, Nigeria.

Asking price: ₦185,000,000,000.

You have direct access to the owner. For more information call or send me a message on watsapp on this number 08080326327.

Peace!

u mean ₦185Billion for 3 plot..?

KolaShangOne:
What's happening with POP cement prices.. I quoted 6500 at the beginning of the turnkey project.

2-3weeks ago, I still confirmed 7,000 from my supplier, now 9,500...

I'm tired.

Exactly what i raised the other time.


Now let me give this professional advise (Building Contractors Only)

Whenever you are submitting a bill. Always do a Material Price list along with ur bill on which the basis of your quotation is formed.

Now, when there is material price fluctuation, follow the attached excel template for your claim.
let me know if have any question(s)

redgem:


What about bathrooms....do you tile first before fixing doors?

its advisable to always tile the before fixing door