Fasone's Posts
Nairaland Forum › Fasone's Profile › Fasone's Posts
[b]@gangsta101, i can feel you and ur problem, if you still like ur receiver, u can do better. just go back to the shop where u got it from, and if they still have ur model explain to them that u ran into problem and u want to do stb-stb transfer of software. i pray they will agree. go there with ur working RS232 serial cable. u see, i ran into the same type of ur problem with my HITV pvr receiver. it is a clone and there is apparently nothing for it on the net. i got a file from the net and uploaded it using my flash disk and hell was let loosed. it wouldnt boot again but displayed error info here and there.though i had the backup of its software on my PC but no uploader or communication with it through its RS232 port, though windows hyperterminal client did displayed some info, indicating that the serial communication was ok. finally what I did was go to my supplier who has the same type, did a STB-STB serial files transfer from his own menu options and after some minutes my set came back alive.I rescanned my channels. since then i have not ventured to try uploading any strange patch file into it. so bros, tread this path and lets see how it goes. remember that your null modem RS232 cable pin configuration should be in this form: pins 2-3, pins 3-2, pins 5-5 and of course ground to ground, in case u are making a new one or confirming an old one. good luck.[/b] |
Nash-FTA:that is a nice setup and picture there, congrats, you are a proud owner of a wonderful "dish farm". ain't other neighbors willing to farm too? how i wish we can get ur astrovox decoder here. |
Gangsta101:@ Gangsta101, Enigma thank you all for the informative piece, i will apply new patch to one of them sometime and see, you guys are wonderful. |
Gangsta101:the sets are 4650 model and has mytv logo when starting up and i was able to get to key edit menu with 8282, do u think they have not been patched before? |
@gangsta101, badaru1,toxnaija,olofofo i found out that key02 for disney works on my 4653x and 4663x but didnt work on two 4650s that i installed it on. am i missing something? pls what else should i do? regards |
olofofo:@olofofo thanks, i will try it when i get home. though, i am using a 60cm offset dish, does it make any difference? |
@all, pls, is GTV (Ghana TV) still up and working on NSS 7 @ 22 deg west? I am able to get LC2, Canal 2 and others except GTV. thanks in advance. |
jujukemist:@jujukemist i live in Kano, Nigeria. @enitan could you let me taste the Zain thing? I beg send this to me please, suleayinla@yahoo.com grateful 2 u. |
@all, i need to thank all of u gurus, newbies and the onlookers, i don't want to mention names but then few names still comes to mind anyway, badaru,jujukemist,enitan,twinstaiye,olofofo,captainus,gangsta,toxnaija,f_marchal, biggjoe, you all know yourselves. i have read over 60% of this thread and using the knowledge you all freely and genuinely passed down i can say proudly that i have installed nilesat, intelsat 7/10 ku and nss 7 for my friends without any supervision or hassle. it is true that many forums exists on the net but certainly the information one obtain in this forum is relative to Nigeria and Africa soil. just yesterday i was able to combine the ''lectures'' (post) of toxnaija, gangsta, f_marchal and i think enitan to input nilesat disney keys into my srt4653x and viola, it opens. i didnt even bother any of you with phone calls. to whom much is given, much is also expected. thank you all for being active poster and for sharing.more blessing to you all. |
@urfriend and others, pls kindly help me. i want to know how to enter the key edit menu on my hitv pvr decoder. thanks in advance. |
@badaru1 do u know dat I have always enjoy ur postings, who will not? keep this up man.God bless you more and more. you are a guru and you never blow any trumpet about it. @guru in the house don't let the questions from newbies bother you, refer them to previous posts, they will never 4get you for learning from u, remember that a lot of people don't have the real basic technical know-how to manipulate things themselves. a lot of people still depend on others to even tune their digital TV talk less of setting up FTA. pls show ur love and personality by helping others @all you will realise that this is a wonderful forum to be so let's keep keeping on, |
@baba_egun that is a good one there, an eye opener ("Laju e" stuff as lagosians would says) but really educative. i think that it is high time government restructure that monster called "Alaba" who knows, a few of the fire incidents in nigeria might be traced to fake things bought from the market. the northern part is not endowed with a market like that and you can pick up your stuffs from reputable shops/outlets at reasonable prices. do enjoy ur leave in the splendour egun empire. @all kudos to u all, happy tracking and viewing |
@azeezbaba thank you very much, i need to peak my dish once again, heavy rain might have affected its position. |
pls, has channel o gone off again? thanks as u reply. |
azeezbaba:What a bad time really. Do a STB-STB transfer using a null-modem rs232 cable. How I wish you are living nearby my location, I have a working cable that I can borrow you and a strong decoder SRT 4653X. What a pity. At least you should be happy that it is not going to be dead 4ever. Anyway, good luck. @ all What is the good pair of dish size and LNBF to receive Nilesat bird in Nigeria? |
I have to say thank you a million times to all contributors in this thread. i can say that i have read 30% of the content of this thread, and with these "tools" handy, i was able to install for a friend just yesterday, a 1.35m dish and a 90cm dish. the 1.35m dish has nilesat and nss 7 signals while the 90cm has 7/10 signal. we could not receive all of the nilesat signals because the 1.35m is still small for Kano, northern Nigeria where we reside. he bought the materials himself before inviting me over for the installation, i told him that he should have gone for the 1.8m at least. sorry i wasn't there with a camera, so no picture of the setup. it was a worth while venture and i am very happy about it. |
go for mytv smartcard, you can have it without their equipment. better still, go the FTA thread and ask if any one have hitv or dstv card for sale. gud luck |
For me, I use Strong 4651x model and HiTv decoders. I bought a card reader (CAM), installed it into the Strong decoder and automatically the model has since changed to 4653x. I can now use smartcard on both decoders. |
what you have used was the official software you downloaded from strong website, download and use a patch software instead. read through FTA thread to know more. |
@baba egun that is a good technical work. well done! hope the following files will add to the above diagram. enjoy them.
|
Enigma:Thanks for the useful info. I once dared the receiver when I upgraded it with a tboston 8300 software that I got from the net. It went wild and could not start up. I resuscitated it through STB to STB file transfer using rs232 cable. I got another receiver from a friend. I was very happy to see it came alive again. Maybe with time some upgrading file may come up. Kudos to you all. |
@ enigma and all. it looks exactly like this one in the pictures.
|
@ Enigma I think it is a clone or something, doesnt even have a brand name. When I check the net, it look similar to AXIL RC 107. May be you can help. I will post the Axil's picture soon. |
@ Baba Egun. Good work out there. You must be happy with your installation and thanks for sharing. What is the name of the different LNBs that you used? I can see they are not the same. @ gurus in the house, thanks for your supports and for keeping this forum alive. there is this HITV decoder, looks like its a nice one with PVR feature, but does any one know how to enter codes into it and how to upgrade its software? kind regards. |
Sorry, this goes for com settings, Set the parameters of the serial port (COM1, COM2, ) as 115kbps, 8 data bit and 1 stop bit, and XON/OFF none, then power off and on your receiver and check your Hyper Terminal window. If any text is displayed on the Hyper Terminal window, then the RS-232 cable is OK. Good Luck |
Sorry, this goes for com settings, Set the parameters of the serial port (COM1, COM2, ) as 115kbps, 8 data bit and 1 stop bit, and XON/OFF none, then power off and on your receiver and check your Hyper Terminal window. If any text is displayed on the Hyper Terminal window, then the RS-232 cable is OK. Good Luck |
go to people selling computer/electronics parts, ask them for 9 pin female ( with holes) serial/com plugs, not molded ones. the 9 pin at the back of PCs are male because they have pins. remember pins (male) must go into holes ( female). you need to do some soldering or ask that electronics man near your house to do it for you. get some flexible but insulated wires, connect pin 2 of the first female plug to pin 3 of the second, the pin 3 of the first plug to pin 2 of the second, then pin 5 to pin 5 of the second. you have crossed rs232 cable.remember connect the ground(metallic parts) of the two plugs together. for you to test, connect it btween your receiver and your pc, use hyperterminal service in your windows xp, vista.switch off and then on your receiver, the software version of your receiver will be displayed in the hyperterminal window.if u run into problem ,let me know. i have a cable that i built myself and i downloaded the software but haven't use them because i don't really know what the software upgrade will do to my strong 4651x receiver, any one to help? |
I beg you guys, i need the mtn browsing settings too. suleayinla@yahoo.com thanks in advance. |
me too, suleayinla@yahoo.com. thanks |
cant get the recharge card to buy, no gprs access in ibadan and its environs. any help? |
me too pls, suleayinla@yahoo.com |