auwal8377:


If you have your Dollar MasterCard, ask them to prepare the payment through that.

I just paid for some solar goods yesterday with that it went through with just one click.
I paid 355 dollars and the charges were 10.69 dollars or thereabouts.

Ok. Thank u

Please house which payment method is the best now for paying suppliers in China.

Emmypam:
Please Help 🙏🙏
I have two brand new 200 watts panel connected in parallel, both panels have a maximum power current of 11 amp. But when i connect it to my pwm 60A charge controller, they both produce around 5-7 amps total instead of 22A. What could be the problem?

I have not seen a 200W panel with 11A meaning the maximum voltage is 18.1V.

It's probably over rated on label

isangjohnson:
I need this Powmr charge controller. Let me know the price.

122k but will manage 120k

Panda7:
..peter obi is not an economist per say. If he had won the presidential election you could imagine the harsh conditions nigerians would have gone through. As a father, would you rather take garri on credit for your children or wait till tomorrow when you have the money to buy?

All the things he mentioned there this is what u understood?

U refused to acknowledge these borrowings have had no investments or implications in the life of common Nigerians but probably looted.

If I want to lend u money,it definitely can't be to feed or lavish. I must see your business proposal if it's viable and still monitor it so my money can't be lost.

brightk:
is it a general issue with d new cc

Don't know yet but until mentally unstable person enter market b4 we conclude say na madness true true.

Wonder1844:
My Charge controller with this error display
The product is Felicity 120A charge controller.
I have disconnected the battery it still shows the same.
What's the possible solution please

What's the input voltage from the panel before now? I can see 64V there.

Had a similar issue with the new 100A CC where the input used to be 135V but all of a sudden drops to 53V and can't charge the battery any more.
Error 04 is high battery voltage but seems your battery is a 48V so there is nothing high about it.

When the PV voltage drops close to battery voltage, it can't charge the battery.

I have sent it to the seller so he can take it to felicity service center for checks like 2 weeks ago and he has been giving me different excuses.

That controller has not served upto 1 month.

obinna37:
what's the kva

1200W with 40A MPPT

Fritz007:
is this brand still available?

1 unit of 24V left but price is 230K.

mctfopt:


Hi, this fuse current is 150A, any idea the voltage?

I have no idea bro. Those service center guys refused to release it to me.
Took the battery inside and brought it back outside already fixed.

futurenix:
Good evening all
Has anyone encountered the new felicity 10kwh lithium battery switching on normally with battery voltage and percentage displaying but no voltage at the terminals?
Charge controller detects no battery connected.
If yes, pls how did you resolve it

Hello Everyone

I finally changed the fuse at felicity service center PH and battery is back to normal.
Will order a spare from AE now and keep just incase.

Thank you all for the wonderful inputs.

Pls anyone with info on where to get this fuse model? 150A

Jefferyzz:
Use multimeter to check d terminal sef. Aw many volt e dey show

No voltage at the terminals using multimeter.
CC does not see the battery
Inverter does not too.

Guess it's time to send it back. Their china technical office sent a message now saying a fuse must have broken inside and should be returned to the service center.

Thought I could rectify it without tempering the screws and save to and fro 40k for waybil and time.

Jefferyzz:
Sheybi e get circuit breaker for side. Put it on

Nothing like breaker,just the On/Off switch.

luvlyoracle:
Which inverter between transformer and transformer less has lower internal consumption??
Which would u suggest I get??
Any idea what a 1.5kva 24v vs 12v 1kva transformer based inverter would consume??

Finally any body here has anyone for sale??

Looking forwaRd to yall reply

Gracias

1.2KW/24V hybrid with toroidal transformer for 230k.

Dam5reey:


There is a warning sign Check what that means
... also check the breaker..

The warning sign came at some point but no longer there.

There is no breaker just the on/off switch

Good evening all
Has anyone encountered the new felicity 10kwh lithium battery switching on normally with battery voltage and percentage displaying but no voltage at the terminals?
Charge controller detects no battery connected.
If yes, pls how did you resolve it

Pls who has used the proton lithium battery and what is the performance like?

Pls anyone using the hisense inverter AC, can you help out with your review of its performance.
The other brands are almost half a million

Available for quick sales

0-15V battery charger (lithium compatible) 100k

1.2KW/24V hybrid inverter with 40A MPPT charge controller and 30A Utility charger 200K

24V HC01 Battery balancer 30k

24V PLC-10 Battery balancer 30k

Not eight one 8167one979

saydfact:


Your particular root design (without parapet) is less troublesome.

There's no issues as long as it's done properly.... If there's going to be a problem (which is possible), it won't be because of design rather perhaps, the workmanship and thickness of roof used.

Goodluck

Thank you. I appreciate

Good evening my good people.
I have reached the roofing stage of my build and need some input from the experienced.
Attached is the roof model I intend to go for so I can save some cost for other things and also for my solar panels to have peace of mind up there.

Is there any downsides to this roof model when compared to the usual "send down the rain" type?

Also is there any advise for observations/likely improvements to implement in this model?

I will appreciate your valuable inputs

Braaad:
Thanks for your response sir,

The 5units are lithium. They were to go into the same system but one of it had a defect, the cells inside shifted on their mounting and was shorted to the casing of the batteries.(the dealer acknowledged it was a manufacturing defect for this type of their batteries)
The batteries are rated 9.6kwh on the nameplate -the dealer says it is 10kwh- it is mated to a 18kw inverter and 13.2kw of solar with remote monitoring.

The batteries were bought February this year. And we're integrated in installation by July this year.


All other aspects of the system are working pretty good, just the battery.

If you are running the 2000W load during the day then your batteries are not charging to float.

Lithium batteries can be funny. They can indicate 100% full but have not reached the required voltage. Push more charge into it and they will gulp it continuously for more than 3 hours.
If they don't float, the voltage will be dropping faster.

Try charging using utility or generator simultaneously with your PV until the charging current reduces to like 2A while the voltage is 55.2V steady. Try the load again after this and see how long it last.

sharks776:


1. The manufacturing date on the sticker is showing October 2022.
2. Can't determine number of cycles
3. According to the seller, they are telecom batteries.
4. The guy is quoting 850k for the Huawei 48v 150ah and 750k for the 48v,100ah

The Mantrac has 15 cells in it and not 16.
If anything goes wrong with a cell or 2, u can't replace it cause they are welded.
Also confirm the source of the sales whether it's the telecom company that's selling or not before u buy trouble.
If price is 750k I rather buy 51.2v/104ah from valtech with 16 cells brand new with Bluetooth BMS @900k+and the cells can easily be replaced if need arises .

isangjohnson:
Please, those that are using Jbd bms should give me more education on it.
I attached 150A Jbd bms to 160ah 48v battery bank and carried out all the settings to the best of my knowledge.
The major challenge I'm having now is how to push the soc to 100% while charging. The soc usually stop at 98% with individual cells of about 3.4v each.
At this point, the individual cells will keep charging, moving forward to my set value of 3.45v each and the TotalVolt will equally move to 55.22v.
Why is the soc not moving to 100% as the individual cells and TotalVolt are moving?
At 3.45v each cells and 55.22v TotalVolt, the battery is fully charged and won't accept charge again. Once I noticed this, I would go to Control and click on Reset Capacity to push the soc to 100%.
Is this the usual practice in jbd bms?

I had the same problem of constantly Resetting that Jbd BMS and got tired.

Tranquill:


so what is your point? That you can’t stop peddling drugs?

Maybe u find out from your guardians where they brought you from at 4 months old before asking me your question.

Tranquill:
He said he wanted to raise money to marry a new wife

The Imo State lady that was arrested the other day at the same airport en route Brazil was raising money for her father’s burial.

This topic has been on this front page with names from different regions for drug related but u chose to bring out just one and the bigot moderator too pushed it to front page to suit an agenda.

This forum used to be very Good



https://www.nairaland.com/7869491/ndlea-arrests-67-year-old-abuja-airport

Woow!
You have mentioned the top construction companies in Germany, can you please mention the top Construction companies in Nigeria too since we are in Nigeria not Germany.

Uchman81:

The utility charging current is set at 20A, the max is 30A
While the other charging current is set at 60A I guess that is for PV.
When you told me you Cook with yours, that convinced me it's a great product.

This is the one I have with green coloured LCD. The second one I bought has white coloured LCD.
They have changed the design and probably changed the quality of that product which is really bad.

My cooker consumes 1800W and my heat gun is about 2000W.
The inverter runs these without sweating (not at same time anyway).

Uchman81:
It's a hybrid.
Heats up easily while charging with Nepa, the fan stays on through out the charging period.
Damaged my laptop chargers. (All those kikiki sounds, from there the charger will stop working)
Haven't loaded it more than 300 watts so I don't know how it handles load.

This one serious. It's not upto a month you mentioned buying this item and it's already giving issues.
The one I have does not fan continuously.
Check Utility charging current if it's set to Max. ( If yes, U can reduce to 60-70% if the fan still blows continuously).

Can you post the picture of yours here atleast people will be aware?

Uchman81:
Alright, thanks very much. I give them a try.
But apart from that which other good brand can I get below 350k 3.5kva hybrid

Those ones zeestone99 mentioned up there are ok too.

Uchman81:
Boss have you tried this Must inverters, do they have fakes and do they have repair centers across the country. I noticed they are cheaper compared to Felicity

I actually have one I bought in 2021, the 3KW and it's still working till date. Use it to cook ones in a while. The second was bought for a client late in 2021 and still in use till date but they modified it recently and this current version is what I have not used.

There are guys now who can repair those inverters though they charge higher,30k upwards depending on the level of fault.