₦airaland Forum

.

.

Larwin:
.

.

sasquareT:
boss the street is not smiling .
abeg make Una help her

lols, her topic is catchy anyway...many ppl clicked on it with aim to help but she is surely an amateur!

this thread should have been posted in the jokes/comedy section.

most likely they won't give you a fix salary. your return will be based on the number of people you were able to pull for training. your target most times are serving corp members. All these are just speculations anyway.
try to go for the interview and see for yrsef.

This is bad

.

jpts is into hse training and co. as an area coordinator, that means u shud b the one organizing people, location and other logistics for training.u can check dem out

are u goin for training or employment

castleofmercy:
Leave that one jare. Who e epp?

So na here you dey that we no see you for church today

FastShipping:
I still maintain my promise to compensate you for coming back to fix the problem. I just need to wait and see how the borehole produces for the next few weeks. I want to see if there is need to buy 1hp Italian pump.

Let's wait and see.

Oh, Good to hear from you sir, i am also following it up. so far the feedback is not bad. i will also call when they resume work back this week.

Thank you sir.

Happy Blessed Sunday

Ramadan Kareem to all our Muslim followers/clients....

See the mad overburden Owode-Ede

johnson232:
U are wrong....Height is also part of it...H beams are even recommended for any height above 30ft...Height is a major factor when erecting tank stand...

yea, i know height is also a factor...Just nt a major factor.
Most people always run away from H beams due to cost...but when the height is going above like 30ft, the best is to just go for H-beams.

domack99:
This is my thought as well, initially I was thinking of using 5 legs with single 5000 liters. The fifth leg will be at the center of the four legs supporting the tank at the middle. But not sure if the center pole will be necessary if horizontal pole will be use as tank sit which can distribute the weight to the four side poles

try to use 6legs to avoid stories that touches the heart. Using 5legs, the center leg might just b acting aas a dummy, the brazing attached to it also matters.

johnson232:
okay...if u say so...

Just that i haven't used less than 4" in any of mine before for a height of about 30ft...

the pipe to use shud be a function of load and nt height.

Oh,
so in ib we have sol, icsl and kydal. I believe more ll still come and this info ll b helpfull to lot of ppl out dere

tirigbosa:
I checked the place and it happened that they are no longer there. But I was directed to their new office. The new office address is opposite olowotinfowosaanu building, Samsung store, iwo road, Ibadan. The name of the place is sol limited. Seems they are good. I saw people that came from ondo and kwara.

Oh, this is cool. Do you try to get their name, i cudnt remember...IDSL or something

johnson232:
@bold....yes sir. taking into consideration the height of the water tank stand, about 30ft. 4" pipe is recommended.... 2.5" pipe is not advisable sir.

Since the capacity is nt more than 5000ltrs, 3" will just do. and if he is using 6legs, i think he could even use 2.5 to be cost effective.

tirigbosa:
Someone told me of kydal office point, no 47 adeyi street, awolowo way, old bodija, Ibadan. I was told they charge #2500 for their form.

yea, go to kydal. They recruit for foodco and others. I think foodco now pay 50k for graduates.

domack99:
thanks,

so using a single 5000 liters tank on a 4 leg is not a good option?

it depends on the size of yr galvanize. You can split it into 2. And you can try to use 3'' pipe.

if its sitting side by side, then yr tower has to be 6legs. 2.5" is not bad.

...

..

No comment now

timbex96:
@ Larwin Good day sir, do you know any geophysical company I can don't IT in Lagos, preferably near alimosho/ isolo area.

Okay, i ll try and checkout for you,