Hatred is an Incurable Disease, it kills the bearer gradually by burning their heart.

Good one

But I think it can be bigger,

the dome in promotional to building?.........................................................

either the dome is too big or the building is too small.

May Allah Reward does who Built it.

this can only happen in biafra.

Mechanical properties of material:
There are mainly two types of materials. First one is metal and other one is non metals. Metals are classified into two types : Ferrous metals and Non-ferrous metals.
Ferrous metals mainly consist iron with comparatively small addition of other materials. It includes iron and its alloy such as cast iron, steel, HSS etc. Ferrous metals are widely used in mechanical industries for its various advantages.
Nonferrous metals contain little or no iron. It includes aluminum, magnesium, copper, zinc etc.
Most Mechanical properties are associated with metals. These are
#1. Strength:
The ability of material to withstand load without failure is known as strength. If a material can bear more load, it means it has more strength. Strength of any material mainly depends on type of loading and deformation before fracture. According to loading types, strength can be classified into three types.
a. Tensile strength:
b. Compressive strength:
3. Shear strength:
According to the deformation before fracture, strength can be classified into three types.
a. Elastic strength:
b. Yield strength:
c. Ultimate strength:
#2. Homogeneity:
If a material has same properties throughout its geometry, known as homogeneous material and the property is known as homogeneity. It is an ideal situation but practically no material is homogeneous.
#3. Isotropy:
A material which has same elastic properties along its all loading direction known as isotropic material.
#4. Anisotropy:
A material which exhibits different elastic properties in different loading direction known as an-isotropic material.
#5. Elasticity:
If a material regain its original dimension after removal of load, it is known as elastic material and the property by virtue of which it regains its original shape is known as elasticity.
Every material possess some elasticity. It is measure as the ratio of stress to strain under elastic limit.
#6. Plasticity:
The ability of material to undergo some degree of permanent deformation without failure after removal of load is known as plasticity. This property is used for shaping material by metal working. It is mainly depends on temperature and elastic strength of material.
#7. Ductility:
Ductility is a property by virtue of which metal can be drawn into wires. It can also define as a property which permits permanent deformation before fracture under tensile loading. The amount of permanent deformation (measure in percentage elongation) decides either the material is ductile or not.
Percentage elongation = (Final Gauge Length – Original Gauge Length )*100/ Original Gauge Length
If the percentage elongation is greater than 5% in a gauge length 50 mm, the material is ductile and if it less than 5% it is not.
#8. Brittleness:
Brittleness is a property by virtue of which, a material will fail under loading without significant change in dimension. Glass and cast iron are well known brittle materials.
#9. Stiffness:
The ability of material to resist elastic deformation or deflection during loading, known as stiffness. A material which offers small change in dimension during loading is more stiffer. For example steel is stiffer than aluminum.
#10. Hardness:
The property of a material to resist penetration is known as hardness. It is an ability to resist scratching, abrasion or cutting.
It is also define as an ability to resist fracture under point loading.
#11. Toughness:
Toughness is defined as an ability to withstand with plastic or elastic deformation without failure. It is defined as the amount of energy absorbed before actual fracture.
#12. Malleability:
A property by virtue of which a metal can flatten into thin sheets, known as malleability. It is also define as a property which permits plastic deformation under compression loading.
#13. Machinability:
A property by virtue of which a material can be cut easily.
#14. Damping:
The ability of metal to dissipate the energy of vibration or cyclic stress is called damping. Cast iron has good damping property, that’s why most of machines body made by cast iron.
#15. Creep:
The slow and progressive change in dimension of a material under influence of its safe working stress for long time is known as creep. Creep is mainly depend on time and temperature. The maximum amount of stress under which a material withstand during infinite time is known as creep strength.
#16. Resilience:
The amount of energy absorb under elastic limit during loading is called resilience. The maximum amount of the energy absorb under elastic limit is called proof resilience.
#17. Fatigue Strength:
The failure of a work piece under cyclic load or repeated load below its ultimate limit is known as fatigue. The maximum amount of cyclic load which a work piece can bear for infinite number of cycle is called fatigue strength. Fatigue strength is also depend on work piece shape, geometry, surface finish etc.
#18. Embrittlement:
The loss of ductility of a metal caused by physical or chemical changes, which make it brittle, is called embrittlement.
by saurabhjain Edited by Rafiu

If you are bored and looking for a guy as chat mate on BBM

You've found one
Add me on 2BC9C56B

Only matured lady please

I promise no strings attached. It going to be just for fun.

Can you work on fire protection system .
Design of automatic sprinkler system.

sunayo:
APC have employed some angry youths to dominate social media, they have some twitter lords on their payroll, Omojuwa, the Ovation man who contested for president under NCP and others on twitter giving them false impression.

Their social media agents have multiple accounts, on Nairaland and others. But when you talk to real people in market places, buses, and on the streets, majority are for Jonathan.

Take for instance:
the national union of Okada and Tricyle endorse GEJ.
Market women endorse GEJ(food stuff is cheaper and always available, you can't lie to them about this. Thanks to Agric reform, train and good road).

Afenifere and OPC endorse GEJ.

Nollywood endorse GEJ.

CAN/PFN endorse GEJ. Oyedepo, Ayo Oritsejafor, Paul Adefarasin have have influence over millions of christians.

Ohaneze endorse GEJ, that guarantees 80 Igbo voters for GEJ.

Come March 28th, the illusion of social media victory for APC will fade away.

What About The Muslims, Hausas, traditional Worshippers, Are they Not Going To Vote In this Election

Nice post
May Allah Reward the author and The Readers Abundantly
(Ameen)

Iceking1:
Wen i read sum comments, mostly 4rm d Christain folks here, tears jst started dripping 4rm my eyes.
No Muslim person will ever never and ever conderm his fellow muslim, no matter watz d situation...
I repeat no Muslim person will ever never and ever conderm his fellow muslim, no matter watz d situation...
Thurkey has 98% Christain and 2%Muslim for 1,866 years, but today Turked is 99% Muslims and 1% Christain
i wept for all Christain here, bcus u are all playing with fire, u dnt knw wat is cumin ur way
Christainity is a jst 100+ old in Nigeria
Sharia was mentioned in d Nigerian constitution 11 times
Muslim was mentioned in d Nigerian constitution same 11times
Mosque was mentioned in d Nigerian constitution 8Times
Allah and Mohammed was mentioned in d Nigerian constitution 6times each
Christain was mentioned in d Nigerian constitution 0 times
Church was mentioned in d Nigerian constitution 0 times
Jesus Christ was mentioned in d Nigerian constitution 0 times
Now tell me, u see y sum muslim elders call boko haram freedom fighters, yes i totally agreed with dem bcus sharia is in constitution

I have also listened to your Audio Presentation by your so called pastor that want to produce a Constitution thru the back door,
and all his allegation against Islam, OIC, Muslims and even the British that he claim handed over Nigeria the Sultan, before Abacha Become the Best President to save Nigeria.

Am assuming the lot of xthains listen to this Audio campaign presentation are Educated.
if Muslims or the OIC are forcing Xthains to convert to Islam are they also forcing them to retain it after they have converted
If APC as a party has a secret islamic agenda, Do they have the capacity to force nigerians to vote for them.
If GEJ wins The 2015 Election. He he not Still going to hand over to a muslim after 2019.
If According to the audio if the OIC are giving the igbos Money to drop their Religion for Islam, are the Igbos that Gullible.
If the foriegn sponsors of boko Haram are the reasons why he has not yet finished they, does the kidnappers in the southEast and the Pirates Stealing our Oil in the SouthSouth also been Sponsored by the OIC or Muslims.
and so on

My brothers, we have seen this before in 2011, targeted religious campaign against an opponent will not do any good
GEJ is a xhain, what has the xthains enjoyed differently

Let GEj fight the Boko haram and stop using them as an excuse for his failures, go to jerusalem to pray will not wish away challenges away, it has to be thru hardwork with sincere plitical will to take the enemies of the state weather muslim or xthains

Nigerians Should Be Allowed to vote For whoever they like and Sycophant Should stop Using the fear of islamization to confuse Xthain to Vote for GEJ.

if i may ask

Do you Think GEJ can win an Election Without the Vote Of Muslims
Please Smartup and stop playing Religious card, cos it will only divide us the more.

cliffm43:
Buhari is A boko haram sponsor,,,,,only those ISIS will vote for him...............in fact,,for the success of Nigeria..we don't need Anything Like Hausa again,,,,,Only Rochas can vote for Buhari or the foolish Nigerians like Rochas and Amaechi

I hope you wont be upset when they call you foolish too

It's so obvious you guys cant stand having GMB in a free and fair contest with your incompetent and corrupt GEJ.
do you guys enjoy the way the country is heading or what,
GMB is contesting under APC if you think he can't win, then wait for him at the poll.
Concentrate your support for the PDP, and let us have peace
if you thing he is too old, go to court and contest is eligibility.
if you think he his a religious fanatic, take your evidence to the police or sss
else leave him alone.

Solarpower: @OP,abeg abeg abeg,TECNO nor be Hong Kong cmpany n its nt based there. Tecno na confam Chinese cmpany. Thank U

Olodo Like You Where is Hong Tong

Goodnews news now becos it is what you want to hear
If it was otherwise am sure u wud have being bashing sahara reporters

A man of God should NOT always be around the president | Catholic Bishops lay into Oritsejafor


Oh dear, the leadership of the Catholic Bishops’ Conference of Nigeria (CBCN)
is not pleased with the president of Christian Association of Nigeria, Pastor Ayo Oritsejafor,
and the reason is not unconnected with $9.3m smuggling scandal.
Speaking on the BBC Hausa service on behalf of the Catholic Bishops,
Archbishop Ignatius Kaigama, Archbishop of Jos and President of CBCN,
accused the CAN president of smearing the image of the Christian Association of Nigeria,
saying it was wrong for his private plane to be associated with the controversial arms deal in South Africa.
The Bishops said military aircraft could have been conveniently used for that purpose.
“We have been watching with sadness how Oristejafor has been hobnobbing with the Presidency for long,
he is dragging Christianity into the mud. It is not proper, the guilty must be punished.
It is not acceptable for a Christian leader to be seen always with the President.
We in the Catholic have always picked holes in Oritsejafor’s style of leadership in CAN
and we even wanted to stop attending CAN meetings at the national level” he said.
The CAN president is yet to react.

Very Funny, How a Whole State will be shotdown for an incompetent Leader
Birds of the same feather

See how quick most of you are to judge Atiku, you prefer your corrupt and incompetent GEJ Over Atiku for no special reason other than he being a northern
I sorry for u guys

sombody shd pls help me
i like to meet sombody from an avaition sch

imy dream is to becime an aeronotical engineer

is the posting posting out

am a fresh graduate and hope to become an aeronotical engineer[i][/i][color=#006600][/color]

i am a fresh gradaute and have an ambition of becoming an aeronotic engineer
i went to zaria on excution from my schoon in 2008
i got the sch PRO phone number
unlucky me his number as not been responding since i tried calling him
i will be very happy if any one can help me
i don't mind even if you have other schools info