₦airaland Forum

emmasoft:
Norrenberger Dollar Fund

As you get gifts in dollars during this festive period or you came home with dollars, remember to invest some
wisely so that you have gift that keeps giving.

Invest in the Norrenberger Dollar fund at 10.03%. You have opportunity to reinvest (compound) your interest.

Find the account opening form attached.

how is the dollar fund funded? With naira?

Abbeyismo:
There's a way to test that type of knock sensore manually,first make sure the sensore is okay first.
Check the wiring
Check all the fuse just to be sure
If all is fine get another ECU and test ur problem should solved.

how do I check if it's ok?

Guys my Lexus ES300 is having trouble accelerating and I scanned it and it showed the problem is knock sensor. I have tried different knock sensors and it still shows the same issue. I don tire. What can I do?

Guys my ES300 is having trouble accelerating and I scanned it and it showed the problem is knock sensor. I have tried different knock sensors and it still shows the same issue. I don tire. What can I do?

codemaster2much:
how is the fuel consumption

I work from home so I don't drive it much. I spend like 30k monthly on fuel

dolarland:
Good day
Someone wants to sell his es 330 for me @ 2.5million. base on man know man
It's my first car to own..
My drive way will be mostly highway.. like 70% of the time.. I'm extending my business off town about 21km... 32minute drive
How unna see am??

it's a good car if it's still in good shape. I currently own and drive one

Please where can I get this knock sensor that will work for my es 300. I have changed these sensors up to 5 different times and none worked. I want to solve this check engine light once and for all.

Location: Anambra

Valto:
fully coupled 12v 280ah 3,584kwh, 24v 280ah is available now



12v 105ah 1,344kwh
12v 150ah 1,920kwh
12v 210ah 2,688kwh
12v 300ah3,840kwh
24v 105ah 2,688kwh
24v 210ah 5324kwh
24v 300ah 7,680kwh
48v 105Ah 5324kwh
48v 300ah 15360kwh
48v 280ah 14336kwh
will be available from next week.. all made with high quality cells, with all pulling above capacity, according to test performed on them.

okay. 12v 210ah is how much?

Valto:
Eve 105ah lifepo4 lithium battery cells available
GOTION 300AH lifepo4 lithium battery cells available at affordable prices. discount on quantity.

whatsapp 08020574628 or telegram@vvalto

do you have a fully coupled 24v 150ah battery?

dollarnaira:
You still didn't get the point.
See enh right now:
Today 26/3/24 12:05pm
115w freezer
50w tv
12w tv box
2 rechargeable fans
1 100w peddling for sewing

All working... On just 100ah LifePO4.

You cant try it with 220ah tubular.

N.B 3 days ago I plugged in 1250w hair dryer.
Try this on 220ah tubular e go pack up less than a year. THIS IS THE POINT!!!

which inverter do you use?

Ominie:
https://www.reddit.com/r/S21Ultra/comments/13j2tje/s21_ultra_no_software_update/

Thanks bro. I read further and saw that the S918U is still tied to Verizon even if it is unlocked and at that, only Verizon can send you software updates, and to get software updates from Verizon, you must have the Verizon SIM card in the phone. I went ahead to flash the S918U1, which is the unlocked version, and get updates directly from Samsung. I am now on the latest version. Thanks for the help!

I bought an S23 Ultra last week which is currently running on Oneui 5.1 and Android 13 and I haven't received any software updates yet.

I have tried Smart Switch and no update was found. OTA says Software is up to Date.

I did an Imei search which says my phone is carrier unlock via Verizon. My model number is SM-S918U.

What can I do to receive software updates?

aboyaji:
How do you feel posting your items without price?

doesn't make sense at all

Can I mount solar panels on my balcony? It's facing south east. Can it be able to generate enough juice?

MeineMutter:
The door is oversized. I doubt if adequate measurements (of the door opening vis-à-vis the thickness of the doorframes) were done before buying or fabricating the door.

There are a lot of fixes.

One could be costlier than the other. The cheapest may be to thin-down the frame to allow key spinning, since you insist on being able to rotate the key.
Because your aim is just for the to turn or spin, taking off about 5 to 10mm of material from that doorframe may be help but it may deface or distort the thickness of the frame compared to others. I doubt if the frame’s thickness is up to 2 inches.

I still wonder where the door spindle will lock into spindle plate in the doorframe because the picture you shared is not showing where the door engine is locking into, as I have said earlier. Is it locking into the wall brick or into the wooden frame because that door is oversized?

It would be good if you can share the pix of where the spindle will lock into (that’s if there is any). If there’s none, the next fix may be to remove the frame completely and let bricklayers take of some bricks from the wall to accommodate the wideness of the door. This will be expensive than the first fix sha.

To do that, you need to properly know which side of the doorframes would be perfect to brake-down its bricks. It’s not compulsory the expansion is done at the side where the door engine is. Check with your bricklayer to know which side is safer, considering so many things e.g closeness to another wall or concrete or column.

You may end up condemning the frame bracket (the bar) because it will be shorter after expansion/pulling down of the bricks.

Expect more damage to the doorframes, if you have used conventional nails in joining them together. Whoever is handling the repair has to be careful.

Please try and share the pix of where the door will lock into. Let’s see if the frame can be reduced to 1-inch thickness at that side and be able to accommodate the door.

thanks for the breakdown. The spindle locks into the wall. I will snap more pictures tomorrow when I get there.

michlins:
This is an issue I encounter every day as this is my work. The frame is the problem and the welder should have fixed it earlier

what can be done at this point?

diordaves:
Wahala dey o. Na who install the door?

It is a wrong size of door. The door is bigger (wider) than the opening.

Take down the entire door and frame. Knock back the wall to widen the door opening to the appropriate width. Install back the frame, dress it and hang back the door.

If the door comes together with the frame (metal door), take the whole thing down, widen the opening to the right size and install again.

If all the above is not the case, check the hinges. The hinges may be out of sync and loose. Check the screws and tighten.

ah. It's a new apartment I just paid for. Noticed the issue yesterday after payment

What can I do to this? The door frame is preventing me from turning the key

WorkTheTalk:
PIA Premium VPN still available

how much?

FXcandles:
Forex market movement is dynamic, yesterday oil price dropped to low 79.63 and close at 82.30 so it seem long wick formed in the body candle. According analyst, the bearish market yesterday triggering by China news data that show negative impact to oil price. Overseas exports of Chinese goods have recorded the worst month-on-month decline since February 2020 last month, down 14.5% in dollar terms. China’s crude imports have followed suit and decreased by 19% month-on-month to 10.3 million b/d.

Whats your bias on USOIL?

RKTexpert:
Person don enter one chance for goatfunded hand oo oh, after passing his $100k account and got funded, he open a 0.02lot size position with no stop loss..just like that the prop firm took the account from him for violating one of their 'hidden' rules...be careful out there.

which rule was that?

ChrisKhing:
U guys shd Congratulate me.. I made 12%...I was at 18% b4 shit happens... Omo trading no be moimoi... My Inexperience hits me hard, made a lot of mistakes.(knowing market structure would have saved me a lot).. I take this as a positive.. way better than a Demo account (I Jus dey shoot emotions everywhere😂). Demo account no fit gve me dis vibes.

I would have been stuck reading everything I could lay my hands on with no practice cus I wouldn't have felt this thrill. Shout out @Boss samfelly for always ready to help (Thank You Sir).
I didn't write this epistle for the reward.. No!!!! am inexperienced as hell.. I didn't sign up for any competition for next month... I need to work on my mistakes, watch more videos and read more books.

Shout out to those guys that dropped telegram group(na there I dey source ma books from).

I love this thread... Most educative thread on Nairaland

which course did you use?

greatcheer:
Am still a new bie somewhat.
what do u mean by countdown to news release
self taught as well.
learnt a lot on this thread.
infact this the first time am passing the first week of forex competitions?
Anyways thanks

which course did you learn with?

Abeg which forex course should I learn with? I have finished with Dapo Willis course and would love to go through another course to find the best strategy that would work for me.

I will need a beginner friendly course recommendations.

Thank you

temptmediang:
Hi, I have a verified Adsense account for sale. The account has collected multiple payments and currently has $11 in it. Please if you are interested contact me via 08138827755.

how much

kingreign:
You mean to tell us that you don’t know the car you’re driving or what?
What’s all these confusion and uncertainty for?

I usually just call it es330. I always thought they're the same. Didn't know engine parts are different

kingreign:

You/your part seller and your kazeem no try.
Haba!


Una go dey buy wrong knock sensors.

I am sorry for the misinformation but my car is actually es300, 2002.

GAZZUZZ:
Your vehicle is a 2005? If I am correct you have the wrong engine currently installed .

The Es300 comes with a 3.0L 1mz engine and knock sensors like what you have in your hand.

The ES330 comes with a 3mz vvti engine and black plastic knock sensors like in the pic below.

I recommend you buy the right knock sensors and short knock sensor harness and send me a bottle of wine when you done and it's working fine.

PS find me number and contact me for parts of you cannot find

my car is actually es300 2002.

When we open the engine for the replacement, the picture of that knock sensor I uploaded was what we saw

GAZZUZZ:
Post a pic of what you have been changing let me solve the riddle .

that's the image

Oga Gazzuzz,

I scanned my car ES 330 and it says that my knock sensor, bank 1 and 2 is faulty (P0325 and P0330). I have changed upto 4 different sensors and it still brings out CEL after clearing it.

We have checked the harness and it's in good condition and we have actually used 2 different harnesses.

What could be the problem?

All the sensors were tokunbo and untested. How can I get original and tested sensors?

Could it be something else that's wrong?

lyort:
Has the wiring harness been tested to the ECM? A continuity test from the knock sensor socket to the ECM socket may be required.

how can I do this? I have a cheap Bluetooth obd2 scanner

kingreign:
And you’re sure if the wire is not severed by rodents?

Pls drive for some days, scan and post here.

I changed it along with the wire.