₦airaland Forum

A View of the roof work from the interior.

Milano Black - Manufactured in New Zealand

Good morning Viewers.
We are commencing the Window works of this project this weekend. Stay tuned for more updates

Welldone.. Following keenly! From a professional point of view.. If building at a slow pace.. Which do u think should come first after roofing.. Conduit piping or windows?

Dennis3D:
Good morning Viewers.
We are commencing the Window works of this project this weekend. Stay tuned for more updates

BiigTee:
Welldone.. Following keenly! From a professional point of view.. If building at a slow pace.. Which do u think should come first after roofing.. Conduit piping or windows?

Normally before or immediately after roofing.
The Conduit piping of the ground and upper floor (Duplex) ought to have been done before windows.

However, either of the two stages of work doesn't interfere with each other so they can be done at separate times.

Like this particular project now. We are just about to commence the upper floor piping while the window work is ongoing too.

Stay tuned here and click on follow thread for updates from this project. Window works starts in two days

Thank you sir.

Dennis3D:
Normally before or immediately after roofing.
The Conduit piping of the ground and upper floor (Duplex) ought to have been done before windows.

However, either of the two stages of work doesn't interfere with each other so they can be done at separate times.

Like this particular project now. We are just about to commence the upper floor piping while the window work is ongoing too.

Dennis3D:
A View of the roof work from the interior.

Milano Black - Manufactured in New Zealand

This is not the original New Zealand this is china...but good job

DelCrux:
This is not the original New Zealand this is china...but good job

Please how can we identify this is China made?
Thank you.

Hajji M.

mufutau55:
Please how can we identify this is China made?
Thank you.

Hajji M.

Interesting question. So we too can learn from him.
We are open for more ideas and information.

DelCrux:
This is not the original New Zealand this is china...but good job

Thanks for you input on this.
If there are ways to know the Original new Zealand. You can share with me as well as other readers so we can add that knowledge in.

Thanks once again as I anticipate.

We are all learning every day. So when I get to the factories next time I can be able to say this is what I learnt new

Dennis3D:
Thanks for you input on this.
If there are ways to know the Original new Zealand. You can share with me as well as other readers so we can add that knowledge in.

Thanks once again as I anticipate.

We are all learning every day. So when I get to the factories next time I can be able to say this is what I learnt new

We are all waiting for his proof to learn more, we will keep learning everyday.

Good afternoon Followers.
The window works on this site commences tomorrow. Monday 16th May 2022

As Promised - Attached are the Window frames to commence fabrication ASAP.

Is fabrication on site better than paying for them to make it and deliver them install for u? What's the advantages?

Dennis3D:
As Promised - Attached are the Window frames to commence fabrication ASAP.

BiigTee:
Is fabrication on site better than paying for them to make it and deliver them install for u? What's the advantages?

Good evening sir. Fabrication on site is always better as it gives them the opportunity to always cross check their measurements and ensure no mistake is made and equally reduces the risks of broken glass during transportation in some cases.

It equally gives them opportunity to make and adopt new measurements when changes are made on site during fabrication. I have seen that happen. In fact in this project, we even changed the position and size of a window and removed one too.

So in my opinion, it's preferred to start up window fabrication on site.

Good morning Viewers.

Will be updating the thread on the window framing soon. Stay tuned

I appreciate your intuitive responses

Trully u know ur onions..

Is on site fabrication more expensive? Or cheaper?

Dennis3D:
Good evening sir. Fabrication on site is always better as it gives them the opportunity to always cross check their measurements and ensure no mistake is made and equally reduces the risks of broken glass during transportation in some cases.

It equally gives them opportunity to make and adopt new measurements when changes are made on site during fabrication. I have seen that happen. In fact in this project, we even changed the position and size of a window and removed one too.

So in my opinion, it's preferred to start up window fabrication on site.

BiigTee:
I appreciate your intuitive responses

Trully u know ur onions..

Is on site fabrication more expensive? Or cheaper?

It has no role to play in the cost of the aluminum works when you have scaled through the negotiation process with your aluminum vendor.

Its even much preferable for them to fabricate on site because it reduces mistakes in measurements which can lead to increase in cost from the vendor if mistakes are made as a result of off site fabrication.

Thanks chief.. Mr Taoreed was unavailable for the roofing job but I was able to get someone else.. For roofing and nogging we negotiated 200k Workmanship.. As a first time home owner what do u think I should be on the look out for as we make preparations to commence roofing?

Dennis3D:
It has no role to play in the cost of the aluminum works when you have scaled through the negotiation process with your aluminum vendor.

Its even much preferable for them to fabricate on site because it reduces mistakes in measurements which can lead to increase in cost from the vendor if mistakes are made as a result of off site fabrication.

BiigTee:
Thanks chief.. Mr Taoreed was unavailable for the roofing job but I was able to get someone else.. For roofing and nogging we negotiated 200k Workmanship.. As a first time home owner what do u think I should be on the look out for as we make preparations to commence roofing?

After the purchase of the roofing woods. Make sure they are treated with Soligum and Kerosene or oil to avoid termite in the future.

Also, ensure appropriate height is chosen for your roof before they start.

God bless you

Dennis3D:
After the purchase of the roofing woods. Make sure they are treated with Soligum and Kerosene or oil to avoid termite in the future.

Also, ensure appropriate height is chosen for your roof before they start.

BiigTee:
God bless you

You are welcome sir.

Window fabrication update from site

Good morning

Good evening and welldone sir

Dennis3D:
Good morning

Just started following this project. Good project and inspiring. Well done.

@Dennis3D, I am wondering if the requirement for a foundation to cater for the soil type made a great difference in N18.5m spent to the decking level? In parts of the country (like Enugu) without water in soil issues, I am suspecting this cost might be lower right?

Dennis3D:
So far on up to this level of Decking was 18.5m on the main building

Please what's the amount spent now up to this roofing level?

Dennis3D:
On a personal site visit.
Here comes what we have come up with so far

Whitehorse:
Just started following this project. Good project and inspiring. Well done.

@Dennis3D, I am wondering if the requirement for a foundation to cater for the soil type made a great difference in N18.5m spent to the decking level? In parts of the country (like Enugu) without water in soil issues, I am suspecting this cost might be lower right?

The foundation cost on this project has a significant role to play in the cost. This is Raft foundation.

Enugu is mostly strip and pad because of the string soil.

Definitely Enugu foundation work is lower.
We have worked in Enugu before.
Ozara by four corners.

Whitehorse:
Please what's the amount spent now up to this roofing level?

I will check my system and update you on this ASAP. network here as well is very challenging pls bear with me if I respond a bit late.

Whitehorse:
Just started following this project. Good project and inspiring. Well done.

@Dennis3D, I am wondering if the requirement for a foundation to cater for the soil type made a great difference in N18.5m spent to the decking level? In parts of the country (like Enugu) without water in soil issues, I am suspecting this cost might be lower right?

The project Carcass is 27.9m (Foundation to Roofing)

Window work update from here.

Thanks a lot for the cost information.

The project is now five bedroom as some modifications were done right?

Dennis3D:
The project Carcass is 27.9m (Foundation to Roofing)