₦airaland Forum

I believed you got my message through whatzap

Work in progress

@hamatime.
When a surface of wall is well prepared.
-It will make the surface to be smooth
- it will reduce excessive use of paint.
- it will protect paint defects ,( eg, sapronification Wapping, etc.

More update
Master bedroom glass door of 10mm glass thickness

- outside wall screeding going on.
-burglary Bar going on
And many more

@tbrownauto.
Thanks for your time on our tread.
(Q1)cost of sliding window depends on location, type of materials, but price range from 20-28k

(2).the diff bte Nigeria and foreign aluminum is the thickness, Nigeria aluminum is very thick and the colour of the aluminum do not fade off, it's last test of time.
Some Nigeria aluminum are, towal, nigalex,etc.

(3)the type of widow we used here is called CUTTING WALL WINDOW,
Price range 50-60k, size, type of glass, and location determine the price.

The name is B1,
Capacity 3/4 HP
Cost 18,000 now

Work in progess.
Screeding of the wall both in and out to give the building smooth surface and others benefit is going on right now
Pics coming soon


Few of our screeding materials pics here

08066619493

Still on

Reach on us anytime.
08066619493

More coming

You are welcome

Mech...we do it better @rotech con
08066619493

Thanks so much sir,
Pop work price are not the same, it depends on your location and at time design also contributed to the price diff.

But price range from 3500-4500 per meter square

Preparation for inner and outer wall screeding about to start after pop was done.

Current update coming soon

More coming

Happy wkd

This problem is called INO-RUN in yoruba.
*Reduce eaten of cow meat always.
*bath with very clean water always .
* Then go to where they sale harb ask them to prepare INORUN Agbo for you.
Thanks me later

happy wkd to you all

still on

thank you all for your comments and patronages
08066619493 call and whatzap.
5 yrs plus on Nairaland ....still counting

@kopell,daboomb, thanks for the kind words about the job carried out for the gentleman by rotech

leumas2009:
Guys,

I need some advise; I have property where there has recently been an electricity surge and the pumping machine for the borehole was damaged. Hence I have been told that we need to re-cool it. I have been given the following quote:

Recoiling of the machine
18,000
Control box 6,000
Cable 18,000
Labour 10,000
Total. 52,000.

Also I was told I needed to install a timer switch next for the borehole so that we would have another incident where the borehole was left on and a power surge cause damage.

Borehole Timer costed at 25,000

Then, we have to earthen the property as it was reported that the taps seems to have some current in them.

1. Industrial salt he said he needed 2 pack which is 10,000. Should we manage 1 which is 5,000. As required the two is 10,000
2. Two earth rod 20,000.
3. 1/2 coil of 16mm coper wire 25,000
4. Bore hole complete timer. 25,000
5. Workmanship 20,000
Total = 100,000

Is this quote reasonable


THANKS BE TO ALMIGHTY GOD,WE ALSO APPRECIATED YOU PEOPLE FOR YOUR SUPPORT
THIS GENTLEMAN LATER CONTACTED US AFTER HE CHECKED OUR THREAD AND HE GAVE US THE JOB.
BOTH THE ELECTRICAL AND PUMP PROBLEM HAD BEEN SOLVED NOW

08066619493
use genuine and reliable materials for your conduit and surface work in other to have rest of mind

german surface pump available for sale

still coming
call on us we are there for you new construction, renovation and general house finishing

more coming soon
08066619493

Continuation of mechanical work in one of our ongoing project

more comig

08066619493'

Coming soon