₦airaland Forum

mank1234:
Can ppr pipes be used with PVC? Can they be joined together such that ppr are in the wall while PVC runs underground from source?

That's the way we are doing it to reduce cost

Ongoing Mechanical Works on Foundation

Filling Works and Preparation for Mechanical Works on Foundation Floor

Provision of Grade 20 Concrete Mix in Columns Casements

INstallation Pictures

The Tool Required for Installing PPR Pipes.

*Installation Machines, with Rings Burners and Ply Cutter

* 2.9 KVA Generator Set

# LAKE VIEW ESTATE DUPLEX DEVELOPMENT

Some Electrical Piping Looks

Installation of Gate and Fence Railings

Fixing of Handles on Wardrobes and Kitchen Cabinets

Current Painting Updates

Burglar Bar Has arrived Site. And Installation is currently Ongoing.

agarawu23:
Oga brabus

How much do you think this art below will cost me ? My daughter like things like this so much.

But olumide bleeped up in the last art launching or so they did recently. His presentation isnt cool at all and he has the lowest sale of 250k or so. He has a lot of jaw dropping arts but I don't know who adviced him to go with the one he presented.

You guys should Leave Olumide Alone oooo!! I have a personal Envy for that Guys talent ooo. This Painting in Particular speaks a lot to me.

But Oga if you fit buy one for me, I go Glad ooo.

Finally I have worked out a way to add some nice features to the Back view with my Molding guys. Precast Design coming out nice already.

Current External Look 12-04-2016

Entrance Porch POP Works and Current Look

Final Look of POP in Main Lounge

tivta:
Is it possible to put pop on a Celine that has hook and socket for a Celine fan?

yes it is. You just have to extend both Hock and Fan Socket Further Below the POP Level.

Also In locations where the Wiring have been Completed, POP works have Kicked Off. Tiling to Follow too

In the Mean Time, Septic Tank Reinforcement Is ongoing outside the House.

More Wiring Pictures as we Link our Lines to Distribution Board

Updates in just 24hrs, we approach final block Level.

Pics as we kicked off Block Works.

Current Update as we Complete our Concrete Flooring awaiting Second batch of Brick Works on Foundation Path.

Conclusion of pillar base. All Grid lines drawn to ensure professionalism.

babalose:
@skimanski...Your works are outstandingly innovative and contemporary which i believe are not in conformity with norm or time in our Nigerian society. Your introduction of fiber or rubber as an alternative that can be used to achieve this exterior design broadens the horizon but what will be the binding agent of the panels (if fiber or rubber panels are to be used) to give it a seamless flow? I can't notice any panel borders/edges in the picture.
They are both materials that can be used under any environmental condition but my focus is on a locally achievable design that will be pocket friendly while still making an architectural statement. Its unfortunate that you lost contact with the company that brought fliers to you because their contact would have been most appreciated.
I believe the purpose of this questions are to inspire ideas on how it can be achieved locally at a pocket friendly cost which in turn favors my build or others who might in future consider it, as an option. I am a firm believer that nobody has the monopoly of wisdom.

---

cc abdulwastecx, brabus, spyder880, skimanski, segzy14, kkonsults, segcymoor, BITWORKS and other notable builders. Input from others who do not believe in an architectural norm will be appreciated.

OK! How it can be Archived Locally at a Pocket Friendly Cost.

Maybe we Nigerians should take it Step by Step. First How do we archive it Locally. once that is done, and we are sure its Weather Friendly and can Stand the test of time, then We start looking for Pocket Friendly Ways of Recreation.

Lets Assume we were given the Design by a Client, what do we do? I for one will Get Rubber Panels, Take it to Rubber Cutting Firms, and Get my Patterns Cut out of Each Panel by their Pattern Machines and Looking for a way to stack them will be simple for me to do. What I am mainly concerned is the Materials that can be Maintained and User friendly, thats why Rubber, Fibre and Aluminium Comes to mind. Light Weight. TO get a firm to cut out patterns won't also be difficult. Look at these spoons, we have firms in Nigeria that can cut out the Filter Patterns you see on them.
Any Other Suggestions is welcome anyway

babalose:
@sypder880....Do you know where this can be achieved in Nigeria for a space of 4m by 15m, if one should decide to use aluminum or steel material? What thickness of aluminum or steel will be durable for this design?
Based on the 2nd picture in my initial post, i think the thickness of the material used seems to be in the range of 5mm to 10mm. Please, kindly consider the weight of the material you are suggesting. Bolts can be spotted in the 2nd picture.

@brabus....Don't you think Aluminum or steel material will be a better durable option, than your suggestion of vinyl on polycarbonate? Knowing fully well, that the thickness of the material might help it to weather the outdoor element. Obviously, one can't use materials that can corrode or erode with air, sunlight or water.

---

cc abdulwastecx, brabus, spyder880, skimanski, segzy14, kkonsults, segcymoor, BITWORKS and other notable builders. Input from others who do not believe in an architectural norm will be appreciated.

What I see here are Fibre Products, Aluminum Products or Rubber Products Been sold as Panels with Different Designs/Patters, depending on your preference. You buy them and Stack together. If you look closely, you see where they are been Held Together by something Like a lock on. I once had someone drop Fliers on Site with something Like this, wish I had taken it serious and called them to site for a meeting.

Precast Design Works.

Our Design is Basically Just Square and Straight. Just Slightly Blunt on the Edges as you will see on the Pictures. Hanging Works Already Ongoing

Back View of the House as We Install our Roof Facials. Sorry if this is the first time we are seein the Back view. Its not Just Pleasing to Look at Compared to the Front.

Anyway, I Need to Scratch My head hard, so as to come out with e remedy for the Back View. Thank God my Precast Designs Team are on Site. Maybe they can help.

Cutting of our Facials Board Covering. Such a Difficult Job involved in Cutting it, due to its Cure Strength

On going POP Works on Main Lounge and Dinning. Closing in on Final POP Works

Affordable architectural designs. Construction, Renovations, and Interiors. (Tiling, Kitchen, furnishings and solving general House problems)
Designs & Structures.

Architect Jude O. Odemwingie.
email: jude@dnstructures.com
email: skimanski4life@yahoo.com
website: www.dnstructures.com
Tel; 08038390386 or 08185174782
follow us on Instagram: @ dezynstructures

Kindly Follow our numerous professional works Works on the pages below

https://www.nairaland.com/1164230/best-architectural-interior-construction-works
https://www.nairaland.com/2067260/lekki-gardens-finishings
https://www.nairaland.com/1331375/architecture-lagos-nigeria-construction-duplex
https://www.nairaland.com/1522743/new-dimension-nigerian-architecture-construction
https://www.nairaland.com/2543797/4-bedroom-duplex-new-dimension
https://www.nairaland.com/2963940/arcadia-groove-estate-constructing-4
https://www.nairaland.com/2770635/construction-works-units-flats-new
https://www.nairaland.com/2985698/construction-flats-owerri-new-dimension

Current Master's Bedroom View after POP Job. These Big Windows do have a way of Making Spaces look Grand.