Mandate1: you're absolutely right on this. Buying it was a mistake anyway, but I'm optimistic it will serve me.
Don't be discouraged because of my opinion or consensus here. It may as well serve you more than us. I believe you cam easily access Skyrun here in Nigeria, unlike Ecoflow, which I think it is a plus.
okooloyun1: I ordered for 555W solar panel from Fouani this morning and they delivered it to my doorstep this afternoon. I don't know that this thing is this big oooooo
Yea, I said that in past posts...looks can be deceiving. And it is fcking heavy too.
We talked about Skyrun on this thread if you read it chapter by chapter.
The reason many are hesitant about the Skyrun power station is because of experience with their other electronics. Also, no accessible reviews from other users. Another is that it is just a 1-year warranty, unlike Ecoflow, which is 5.
I think you will be the first to use that Skyrun on this thread. I may be wrong.
Do you have a freezer?
Enjoy.
Mandate1: I just got the skyrun 2000W Power Station. My first usage isn't bad after a full charge. So far I've used about 9hrs on 50' Samsung TV, dstv and standing fan and it's still on. Will test it with home theatre system tomorrow after full charge to see how long it lasts also.
Would have gone for the ECOFLOW due to the positive reviews, this was an after thought. But so far, the skyrun isn't bad.
okooloyun1: My 20FT 12AWG MC4 to XT60 cable was delivered by Temu yesterday. It took about 9 days since I ordered for it.
Pls, I want to order for 550 watts solar panel from Fouani, will they deliver it to my doorstep?
Have a maruwa's number at hand so that when they deliver it, you can carry it to your house. They will try and deliver it close to you if your area is accessible. Kindly give me the 20ft link for temu. Thanks.
Dotmanmcdon: Nice the higher AC speed charging speed the faster the powerbank get full and what I noticed is that immediately it gets to 100 the fan stop blowing.
Dotmanmcdon: So now I have changed the AC to 50hz Carried it to my grandparents house and this thing is charging normal with their nepa light, I don even increase the input watts to 800 to let it charge fast. I also noticed something, one side of the fan is blowing hot while the second is cool This thing got full in less than 2hrs pls is it normal.
I use the Delta 2. When you increase the charging speed, the fans will come on fully...with one side all blowing (let's say left) and the other side of the unit being normal. I don't think there is anything wrong. The higher the charging speed, the faster the fan will work to help cool the unit.
Getting full in less than 2 hours is normal. In fact, Delta 2 full AC charging speed is 1200W, and it will be full in 56 mins. Just prioritise battery health. I only use the fast charge in emergency when I am sure that light may not be that available for the day again.
Dotmanmcdon: Hello boss so I did something now. Charged it with my gen and it worked Instead of 50hz it was 60hz mine was bringing Fan was working Input was from 99-102 Setting for input from my phone was 100watts The gen I used is firman sumec 6kva It charged from 0-2 in under 30mins
That's a relief. Keep experimenting. I said 50hz because that is what we use here in Nigeria...while the US uses 60hz. You can set the charging rate to balance so it can charge faster as well as keep a healthy battery.
Dotmanmcdon: Tried it with a stab and it still bringing overload I set the ac charging speed to 100 It even at 0%. I have also reset and connected back still same overload (with stab)
where did you order it from? Also, on the screen, what is the Hertz (HZ)?
Dotmanmcdon: It not even bringing the error code again Ac Charging speed set to 100 I don't even have the mind to plug it in again I will wait till the light is regulated cause it been going on and off. Pls consider my request of a WhatsApp group Thank you for the prompt response
So far you use it with stabilizer, there is nothing you should be afraid of. If the light is too much, the stabilizer will not even allow it through.
As for Whatsapp, we are happy with this thread for future reference. Anyone can read from the beginning...not so with Whatsapp. Thanks.
Dotmanmcdon: Hello everyone here can we pls create a WhatsApp group for easy communication. So that those of us that are new users can get a prompt response. Nepa eventually brought light and when I plugged it in it read "overload" I don pack am inside the carton back sha🥲🥲
Use a stabilizer. Also, ensure you set the charging speed, and whatever you set it to must not be more than the stabilizer capacity. Best you set it to half of it. Always use a stabilizer before PHCN with its dirty power damage your device.
YOu will have to put it ON, and if that error code is still there, reset the BMS by holding the power button for a few seconds before you do anything again.
Dotmanmcdon: Hello everyone just got my river 2 pro As usual there is no light to charge it can I use my 6kva gen to charge it. I am asking because I was told to charge before use and I shouldn't use gen.
UPDATE:
Okay, I just tried mine with a generator after servicing it. It worked when I plugged it directly into the socket. It did not work with a stabilizer at all. And the charging speed I set it to was 500W. Generator is rated 2.5KVA.
Dotmanmcdon: Hello everyone just got my river 2 pro As usual there is no light to charge it can I use my 6kva gen to charge it. I am asking because I was told to charge before use and I shouldn't use gen.
Be patient till light comes. You can use generator, but it has some learning curves to it because some of our petrol gen are not sine wave. So, be patient for the first charge.
As for generator, I stand to be corrected. You may need to reduce the charging speed in the Ecoflow app for it to work and most likely use it with a stabilizer. Something of that nature. You can google it.
However, for phone, what you need is to download MT5 app for android, search for the company and input your details. It should be on YouTube how to do this.
Peng12345: I appreciate, I did register and got verified. However I could not get to install the tentrade live setup on my phone or it it opens only with Laptop?