₦airaland Forum

Bro, forget it. That Franklin R702 is UNLOCKABLE for now.

saint2ace:
Hi Wilfem, from your explanations you used a different method from what has been written here; why don't you go through the process as illustrated on this thread, starting from the very beginning of bootshooting the board of the mifi, load the bin file and loading the firmware as if from the beginning, since you've unlocked it theres no need to calculate the unlock code using either putty or the unlock calculator, then loading your desired webui. Try these and give us a feedback.

Cheers......

I've tried so and it's still the same thing. The blinking lights still continue. Like someone once said, I've never experienced thing of such before. I even got in touch with the guys from routerunlock.com, they still said the same thing, since the device is kinda new for now

Still waiting for the assistance from you guys on how to stop the blinking lights while powered on.

frebor:
I never experience that kind error before, I'm sure guys will help you out

Same with me too. I've never experienced anything like this before. And it's like there's another guy who followed the same tutorial and got the mifi dead as mine was before reviving it back. I'm seriously waiting for help and assistance into how to make the blinkings stop whenever it is powering on

frebor:
You go need explain wetin you do for the mifi from start to finish

I shotboot it and loaded the E5573Cs loader, using Balong, then flashed it with the 21.318.99.03.00 firmware, then I also installed the WEBUI_17.100.15.01.356_MRE5, after which I later flashed it with the 21.318.03.00.00 firmware. It is actually unlocked and working fine, but the problem now, like I said earlier is that the moment it is powered off and powered on back, the 2 lights will be blinking as if it is still in that Balong stage, and it won't stop until it is reflashed again.

tyoba:
U probably did something wrong. I unlocked 322 in less than 20mins. Retained Web UI and firmware.

I didn't use the Putty method. I have already flashed the firmware and web u.i before getting to know of the Putty method to calculate the nck code, which is obviously the method you used

It has actually come up, unlocked, connecting and browsing, but the moment it is powered off and powered on back, the 2 lights will be blinking as if it is still in that Balong stage, and it won't stop until I flash/instal the 21.318.03.00.00 firmware again. It is currently using the web UI version 17.100.15.01.356. Please guys, what could be wrong?
Thanks

I've actually unlocked 302 and 602 using the same method successfully before, but this particular one, 322 is really proving stubborn to me.

frebor:
If your device is a 322 and you successfully flashed a firmware or web ui, that's a first. How to revive it, I don't know. Assuming you already removed the battery and reinserted it, it should restart normally


However if it's a 320 or a 609, and you bootshot and loaded bin file, then you need to install web UI, write imei and serial number, so follow this tutorial https://drive.google.com/file/d/0Bz5B68XA15V5ZnhrbzBxUkVZa0U/view?usp=drivesdk

That tutorial link wey you post no go do anything

Instructions on how to unlock the 322 has been explained several times on this thread, for the correct files you need, check here https://drive.google.com/file/d/0Bz5B68XA15V5a0JVZzF6Y0g2TTQ/view?usp=drivesdk

Thanks for your response. It's actually 322, when it is powering on, the 2 lights would come up, but thereafter it'll be just one and will neither broadcast nor connect.

Someone should please help me on how to get this mifi working back. I was initially following this particular tutorial here: http://forum.gsmhosting.com/vbb/f810/huawei-e5573cs-322-unlock-done-2155282/index5.html#post12230751
And have flashed the mifi severally with different firmwares, all to no avail. As of now, its just one light (network) that shows, there's no wifi broadcast, meaning that it cannot be accessed, but when connected with cable to the PC, it shows like this on the Device Manager.
I really need help and tips on how to get it working back, Thanks in advance for your wonderful assistance

Nlandking:
got it to work but stock on 3G only
theres no option to switch to 4G mode
what else can I do

Hello, NlandKing, how did you get it to work back? I have already flashed mine with several firmwares and web UIs, all to no avail as the device is only showing one light and not coming up.
I followed the tutorial here: http://forum.gsmhosting.com/vbb/f810/huawei-e5573cs-322-unlock-done-2155282/index5.html#post12230751
The device is E5573Cs-322.
Please help on how to get it back. Thanks

Bros, how much were you paid for this 'de-marketing' job you're doing here? I've been using Ntel since their inception around April in Abuja, I've also instroduced the network to different offices and they're all satisfied with their services, even though everything may not be all that perfect, but that's what they still use up till now. I'll just suggest or advise that you try their services again, probably in a different location.

So, of all the dreams, 'embezzling money' is what you can dream of? May God help you.

Thanks for the information. I'm in!

What is the model of the router? Feel free to contact me

Goal - Victor Moses

Looks like the laptop doesn't have an HDMI port. Or does it?

hitz:
Available

I have N65K, gimme your contact details and lets talk about the deal

Sellfish:
Still available

I have N70k last.

Mine

libby2016:
Smile modem, Franklin Modem

Hello bro, that modem/mifi is UNLOCKABLE for now.

Keneking:
How do we handle politicians that have stolen and destroyed our lives

Exactly the same question on my mind. Instead they'll even be 'hailing' them for stealing and embezzling our public funds

Bro, what of N75K? I reside in Abuja

coolopj:
Here is the rest of the procedure..Try to login your gmail account attached to your playstore on your phone browser or pc.That's after u have change your address to usa. then goto playstore on that same browser and search for the app u wanna buy,the price will be displayed in $ and one more payment option will be added which is paypal.So if your card is still been declined u can opt for paying with paypal linked to ur atm card.

I tried this option, using an USA address and when I went back to Play Store, the Naira denomination is still being displayed on the application. I actually saw a PayPal option on my neighbour's phone and was wondering how it got there, she didn't even know, as she hasn't even made use of the Play Store to install anything on her phone.

fados4sure:
Don't mind that guy. CBN has block Naira denominated card for dollar transactionhas & you may want to know that am in Europe right now & the card is still not working

I'm quite sure that doesn't work even though I've tried doing so

coolopj:
change your address to usa and the purchase price will change from naira to dollar.Then you can use your card to buy anything you want to.

Bro, it doesn't work sir

Hello everyone, for like the past 3 months, I've been trying to purchase some apps on the Google Play Store, using my GTB MasterCard, but at the end it won't go through as the the card is being rejected and I also kept getting mails from GTB. What's the way forward now, so as to be able to purchase apps from the Play Store? Or is that the end for now?[i][/i]
Below is the screenshot of the mail I got from GTB

Looks like a photoshop to me though

I woke up this morning feeling excited as usual, but was deeply saddened by the news of the exit of the 'big boss'. May his gentle soul rest in perfect peace

Where's the tutorial here?
@op, please post it ASAP. Thanks